Synthesis and characterization of Ce/SiOC nanocomposites through the polymer derived ceramic method and evaluation of their catalytic activity

Cerium oxide and silicon oxycarbide (Ce/SiOC) porous nanocomposites have been synthesized through the polymer derived ceramic route. In the synthesis of the preceramic precursors, the addition of urea facilitates the deposition of Cerium atoms on the surface of SiO₂ nanoparticles since it prevents the SiO₂ from agglomeration. Both Ce and urea affects the structural and textural parameters of the obtained ceramics. Less crosslinked structures are formed when the urea concentration increases and it also provokes a reduction of the carbon crystallite size. Cerium, on the other hand, induces an increase of the carbon size as well as the number of SiOC units. Pore anisotropy and smoothness of the surface are also dependent on the composition of the material. As expected, the better thermocatalytic behavior against CO₂ decomposition is found at the largest Ce amounts but also, smooth surfaces and low pore anisotropies favor the accessibility of the gases to the thermocatalytic centers.     

Polymer derived ceramic materials from Si,B and MoSiB filler-loaded perhydropolysilazane precursor for oxidation protection

Silica-based coating systems were developed using polymer derived ceramics (PDCs) technology. Ceramic composites on the base of a SiO₂ and SiNO matrix and homogeneously distributed Mo₅SiB₂, SiB₆, Si and B fillers were manufactured. The coating systems have low porosity and provide a high oxidation resistance up to 100 h at 800 °C and 1100 °C in air. The influence of temperature and atmosphere of pyrolysis on the polymer precursor, the volume fraction of filler materials on the chemical composition of compacts as well as their high-temperature oxidation protection was investigated.     

The Crosstalk of Adipose-Derived Stem Cells (ADSC), Oxidative Stress,and Inflammation in Protective and Adaptive Responses

The potential use of stem cell-based therapies for the repair and regeneration of various tissues and organs is a major goal in repair medicine. Stem cells are classified by their potential to differentiate into functional cells. Compared with other sources, adipose-derived stem cells (ADSCs) have the advantage of being abundant and easy to obtain. ADSCs are considered to be tools for replacing, repairing, and regenerating dead or damaged cells. The capacity of ADSCs to maintain their properties depends on the balance of complex signals in their microenvironment. Their properties and the associated outcomes are in part regulated by reactive oxygen species, which mediate the oxidation-reduction state of cells as a secondary messenger. ADSC therapy has demonstrated beneficial effects, suggesting that secreted factors may provide protection. There is evidence that ADSCs secrete a number of cytokines, growth factors, and antioxidant factors into their microenvironment, thus regulating intracellular signaling pathways in neighboring cells. In this review, we introduce the roles of ADSCs in the protection of cells by modulating inflammation and immunity, and we develop their potential therapeutic properties.     

Cell Sheet Comprised of Mesenchymal Stromal Cells Overexpressing Stem Cell Factor Promotes Epicardium Activation and Heart Function Improvement in a Rat Model of Myocardium Infarction

Cell therapy of the post-infarcted myocardium is still far from clinical use. Poor survival of transplanted cells, insufficient regeneration, and replacement of the damaged tissue limit the potential of currently available cell-based techniques. In this study, we generated a multilayered construct from adipose-derived mesenchymal stromal cells (MSCs) modified to secrete stem cell factor, SCF. In a rat model of myocardium infarction, we show that transplantation of SCF producing cell sheet induced activation of the epicardium and promoted the accumulation of c-kit positive cells in ischemic muscle. Morphometry showed the reduction of infarct size (16%) and a left ventricle expansion index (0.12) in the treatment group compared to controls (24–28%; 0.17–0.32). The ratio of viable myocardium was more than 1.5-fold higher, reaching 49% compared to the control (28%) or unmodified cell sheet group (30%). Finally, by day 30 after myocardium infarction, SCF-producing cell sheet transplantation increased left ventricle ejection fraction from 37% in the control sham-operated group to 53%. Our results suggest that, combining the genetic modification of MSCs and their assembly into a multilayered construct, we can provide prolonged pleiotropic effects to the damaged heart, induce endogenous regenerative processes, and improve cardiac function.     

广东省伴生放射性矿资源利用过程辐射水平调查

为加强伴生放射性矿物资源开发利过程中放射性环境管理 ,防治放射性污染 ,对广东省几个大型伴生矿(包括稀土矿、钽铌矿和铅锌矿 )资源利用 (开采、冶炼、加工 )过程中天然放射性核素的污染现状进行了调查。调查结果表明 :稀土矿中独居石 ,天然放射性核素含量最高 ,2 3 8U、2 3 2 Th、2 2 6Ra的含量分别为 3.5 1× 1 0 4、1 .74× 1 0 5、4 .8×1 0 4Bq/kg,其冶炼废渣中核素的含量分别为 5 .1 0× 1 0 5、6 .38× 1 0 6、1 .5 2× 1 0 6Bq/kg。稀土选冶厂周围陆地环境 γ射线的空气吸收剂量率比一般地区的高。     

对称非线性系统的无交互控制

本文讨论了具有对称性的非线性系统的无交互控制问题。通过定义对称系统的导出分布族的新概念,我们得出了问题可解的条件。我们取得的结果较不具对称性的情况要简单一些。从而说明,对称性不仅使得系统具有较好的结构,而且使得它的其它一些问题的研究得到简化。     

Modal logic as metalogic

The goal of this paper is to show how modal logic may be conceived as recording the derived rules of a logical system in the system itself. This conception of modal logic was propounded by Dana Scott in the early seventies. Here, similar ideas are pursued in a context less classical than Scott's.First a family of propositional logical systems is considered, which is obtained by gradually adding structural rules to a variant of the nonassociative Lambek calculus. In this family one finds systems that correspond to the associative Lambek calculus, linear logic, relevant logics, BCK logic and intuitionistic logic. Above these basic systems, sequent systems parallel to the basic systems are constructed, which formalize various notions of derived rules for the basic systems. The deduction theorem is provable for the basic systems if, and only if, they are at least as strong as systems corresponding to linear logic, or BCK logic, depending on the language, and their deductive metalogic is not stronger than they are.However, though we do not always have the deduction theorem, we may always obtain a modal analogue of the deduction theorem for conservative modal extensions of the basic systems. Modal postulates which are necessary and sufficient for that are postulates of S4 plus modal postulates which mimic structural rules. For example, the modal postulates which Girard has recently considered in linear logic are necessary and sufficient for the modal analogue of the deduction theorem.All this may lead towards results about functional completeness in categories. When functional completeness, which is analogous to the deduction theorem, fails, we may perhaps envisage a modal analogue of functional completeness in a modal category, of which our original category is a full subcategory.     

Selective oxidation of ammonia to nitrogen on transition metal containing mixed metal oxides

The selective catalytic oxidation of ammonia to nitrogen (NH₃-SCO) has been studied over hydrotalcite derived mixed metal oxides containing Cu, Co, Fe or Ni. XRD, BET, NH₃-TPD and TPR techniques were used for catalysts characterization. Results of NH₃-SCO were compared with those of selective catalytic reduction of NO with NH₃ (NO-SCR). Reaction mechanism was studied by temperature-programmed surface reaction (TPSR) and activity tests with a various contact time. Catalytic performance of the studied samples depends on both kind and loading of transition metals in the mixed metal oxide system. The Cu-containing samples have been found to be the most active catalysts of the NH₃-SCO process. Transition metal loading strongly influences distribution of ammonia oxidation products. The highest selectivity to N₂ was measured for the catalysts with the lowest transition metal content.     

两种沥青炭微观结构和性能的对比研究

将高温煤沥青和浸溃荆沥青在92MPa下炭化，在2500℃下对所得沥青炭进行石墨化处理；测试了所得沥青炭的体积密度、开孔率、比表面积（SBET）；利用扫描电子显微镜（SEM）观察了所得沥青炭的显微结构；利用X射线衍射方法（XRD）检测了所得沥青炭石墨化处理后的石墨化度；测试了所得沥青炭的氧化性能；测试了沥青炭试样的比热容、导热系数、热扩散率和线膨胀系数。结果表明：在92MPa下，两种沥青炭有着相近的密度和开孔率；浸渍剂沥青炭的SBEt高于高温煤沥青炭；浸渍荆沥青炭为流线型结构，高温煤沥青炭为镶嵌型和域型并存的结构；流线型结构沥青炭石墨化度较高；高温煤沥青炭的抗氧化性能要好于浸溃荆沥青炭；随着沥青炭石墨化程度的增大，比热客、导热系数、热扩散率都增大，而线膨胀系数减小。     

不同炭化压力下沥青炭结构特性的研究

将高温煤沥青和浸渍剂沥青在不同压力下炭化，在2500℃下对所得沥青炭进行石墨化处理；测试了所得沥青炭的体积密度、开孔率；利用扫描电子显微镜（SEM）观察了所得沥青炭的显微结构；利用XRD检测了不同炭化压力所得沥青炭石墨化处理后的石墨化度。结果表明：随着炭化压力的增大．沥青炭的体积密度增大而开孔率减小；随着炭化压力的增大沥青炭显微结构有从流线型向镶嵌型和域型转变的趋势：流线型结构沥青炭石墨化度较高；沥青中QI组分也会影响沥青炭的显微结构。