夯扩挤密水泥土桩用于高层建筑地基处理的尝试

水泥土桩已普遍用于多层住宅的地基处理，根据水泥土和夯扩挤密施工法的特点，在对夯扩挤密水泥土桩用于高层建筑地基处理进行研究、阐明其经济合理且安全可行的基础上，在高层住宅工程中进行了尝试，已取得令人满意的效果。     

南冲高架桥某基桩的检测与处理

详细论述了南冲高架桥 6-2桩的检测过程 ,说明了岩溶地质对桩基质量的影响 ,并对此影响和预防措施进行了论述     

Rotational Restraint of Pile Caps during Lateral Loading

A pure fixed-head (zero-rotation) condition at the top of a group of laterally loaded piles is seldom achievable in the field, even when piles are installed in a group that is “rigidly” constrained by a stiff concrete pile cap. Assuming complete fixity during design (zero rotation at the pile head) can result in underestimated values of pile-head deflection, and incorrect estimates of the magnitude and the location of maximum bending moments. A simple and practical approach is presented for estimating the moment restraint that is provided by the pile cap at the top of a pile group. The moment restraint, represented by the rotational restraint coefficient (KMθ), serves as a boundary condition for analyzing groups of laterally loaded piles. Full-scale field tests performed on two pile groups with concrete pile caps show that the proposed method for estimating rotational restraint provides results that are in good agreement with measured field performance.     

Corrosion failure of Zn–Al detonator housing

Some batches of detonator housings made up of Chromium plated Zn–Al alloy were found in an extensively cracked condition after few months of storage at room temperature. An analysis of the failure showed that the cracks were due to intergranular corrosion facilitated by segregation of lead at the grain boundaries. Improper chromium plating further aggravated the corrosion problem. This failure case emphasises the need for strict control of chemical composition for components made from Zn–Al alloy and the process of Cr plating of the components.     

Optimisation of metallic pigments in coatings by an electrochemical technique and an investigation of manganese powder as pigment for metal rich primers

Zinc dust and manganese powder as pigments were incorporated in epoxy-polyamide and butyl titanate medium, with different pigment volume concentration (PVC) ranging from 20 to 74. These protective coatings were coated on sand blasted mild steel substrates and immersed in 3 wt.% sodium chloride solution and the corrosion current was measured by the Tafel extrapolation method. From the corrosion current produced by these primers, the optimum level of the pigments in these binders was identified. Thus the protective performance of optimised primers was evaluated on a sand blasted mild steel surface by the Tafel polarisation method in 3 wt.% sodium chloride solution, over different periods of time. The results were found to be comparable with the salt spray test and galvanic current measurements. The manganese powder used for this investigation showed that it could be used as an alternative to zinc powder for metal rich primers.     

Galvanic corrosion over a semi-infinite, planar surface

We derive the governing equations for the galvanic coupling of two dissimilar materials in a planar surface wherein the transport phenomena in the liquid phase are controlled by ionic migration or diffusion. The problem statement corresponds to two semi-infinite materials located in the same plane and coupled along a single boundary, resulting in a two-dimensional analysis. A single dimensionless group arises in the analyses of the corrosion problems, which greatly simplifies the presentation of numerical results and subsequent implementation. An example application of this work is presented that demonstrates how the results can be used to set requirements for protective films (e.g., paint) utilized for reducing corrosion rates.     

Numerical analysis of galvanic corrosion of Zn/Fe interface beneath a thin electrolyte

A numerical analysis of galvanic corrosion of a Zn/Fe interface beneath a thin layer electrolyte is presented. Specifically, a circular defect, where the zinc coating has been removed, is considered. It is assumed that both oxygen reduction and iron oxidation can occur on the Fe surface, while only zinc oxidation occurs on the Zn surface. The importance of electrolyte thickness and conductivity and defect radius is considered. It is assumed that the iron and zinc oxidation rates are described by a Tafel relationship. If the kinetic parameters of the oxidation reactions are known, the cathodic protection of Fe is a function of a Wagner number, the ratio of the electrolyte thickness to the defect radius, and the ratio of the radius of the defect to the outer radius of the zinc layer.     

Polyaniline for corrosion prevention of mild steel coupled with copper

Polyaniline emeraldine base/epoxy resin (EB/ER) coating was investigated for corrosion protection of mild steel coupled with copper in 3.5% NaCl solution. EB/ER coating with 5-10 wt% EB had long-term corrosion resistance on both uncoupled steel and copper due to the passivation effect of EB on the metal surfaces. During the 150 immersion days, the impedance at 0.1 Hz for the coating increased in the first 1-40 days and subsequently remained constant above 10⁹ Ω cm², whereas that for pure ER coating fell below 10⁶ Ω cm² after only 30 or 40 days. Immersion tests on coated steel-copper galvanic couple showed that EB/ER coating offered 100 times more protection than ER coating against steel dissolution and coating delamination on copper, which was mainly attributed to the passive metal oxide films formed by EB blocking both the anodic and cathodic reactions. Salt spray tests showed that 100 μm EB/ER coating protected steel-copper couple for at least 2000 h.     

冷喷涂钛涂层与1Cr13不锈钢的电偶腐蚀行为

以氮气为载气,在压力为2.0MPa,载气温度为500℃的状态下,用冷喷涂的方法在1Cr13不锈钢基体上制备了钛金属涂层。经SEM观察,发现涂层的厚度较大,没有直接贯穿到基体的孔隙存在,距离基体越近的区域,涂层的孔隙率越小,XRD分析表明,涂层基本无氧化物相生成;从热力学和动力学两方面研究冷喷涂钛涂层与1Cr13不锈钢的电偶腐蚀行为,发现两者的电偶腐蚀倾向较小。     

Electrochemical impedance characteristics of Ta/Cu contact regions in polishing slurries used for chemical mechanical planarization of Ta and Cu: considerations of galvanic corrosion

The contact areas between Cu and Ta of a Cu interconnect can be susceptible to galvanic corrosion during chemical mechanical planarization (CMP) in polishing slurries capable of supporting ionic conduction. In the present work, we probe this effect at a partially Cu-covered Ta disk, by combining electrochemical impedance spectroscopy with potentiodynamic polarization and galvanic current measurements in two slurry solutions commonly used in CMP of Ta and Cu. The results of these measurements are compared with those for a Cu disk and a (Cu-free) Ta disk. The impedance data for the Cu-decorated Ta sample show negative impedance values at certain regions of the impedance spectra, whereas the individual Cu and Ta electrodes are free of this effect. The results are examined and explained from considerations of galvanic corrosion at the Ta/Cu bordering regions in contact with the slurry liquid.