Validation of performance of real-time kinematic PPP. A possible tool for deformation monitoring

Structural failures (bridge or building collapses) and geohazards (landslides, ground subsidence or earthquakes) are worldwide problems that often lead to significant economic and loss of life. Monitoring the deformation of both natural phenomena and man-made structures is a major key to assessing structural dynamic responses. Actually, this monitoring process is under real-time demand for developing warning and alert systems.One of the most used techniques for real-time deformation monitoring is the Global Navigation Satellite System (GNSS) real-time procedure, where the relative positioning approach, using a well-known reference station, has been applied.This study was conducted to evaluate the actual quality of the real-time kinematic Precise Point Positioning (PPP) GNSS solution for deformation monitoring, where it can be concluded that a promise tool is under development and should be taken into account on actual and near future real-time deformation monitoring studies and applications.     

3S技术应用现状与发展趋势

3S技术出现至今,已在诸多领域成功运用并产生了巨大的价值。文章简单介绍了3S三大组成部分:GIS、RS、GNSS的基本概念,分析了3S技术目前在农业、生态环境监测、土地资源管理以及智慧城市方面的应用现状以及对其在该方面未来的发展趋势进行展望。最后对目前3S在应用中遇到的一些问题进行了探讨,给未来3S技术的发展提供一些参考。     

多模卫星信号模拟器设计与实现

应用卫星导航、软件无线电、计算机控制、电磁兼容等技术,研制了基于"工控机+DSP+FPGA"架构的多模卫星信号模拟器;该模拟器在国内最先实现了GPS、GLONASS和北斗一号信号的任意组合、时空同步仿真;详细论述了模拟器硬件方案,介绍了其软件构成和各模块功能,最后通过成熟商业多模接收机验证了模拟器所仿真信号的有效性和任意时空性;此外,该模拟器无需更改硬件即可在未来向北斗二号系统扩展。     

基于GNSS的空间环境参数反演平台及精度评估

基于全球和区域全球导航卫星系统(GNSS)参考站网进行对流层和电离层参数反演实现空间环境变化监测具有成本低、精度高、实时性好等优点,得到了广泛应用.本文基于南京信息工程大学的北斗/GNSS空间环境监测平台Xsensing,以国际GNSS服务组织提供的对流层产品为参考,评估了不同气象条件下对流层参数反演精度,在此基础上采用固定非差模糊度的精密单点定位技术(PPP)实现高精度电离层参数反演.实验结果表明,基于全球参考站的对流层估计误差偏差为0.05 mm,对应的标准差为5.6 mm,在平稳和剧烈的气象条件下均能反映水汽变化趋势特征.基于短基线进行电离层延迟反演精度评估,结果表明浮点解PPP反演电离层延迟误差的平均偏差为-0.09 TECU,精度为0.38 TECU,采用非差模糊度固定技术对电离层延迟提取精度提高达84.2%;静态模拟动态解算模式下电离层估计精度与静态相当.上述结果表明该平台可实现高精度空间环境参数反演,下一步将融合机载、船载等多种平台观测实现中小尺度空间变化监测.     

GNSS接收机多径抑制性能检测技术

多径干扰信号会导致GNSS接收机伪距、载波相位和多普勒等测量精度降低,多径信号对GNSS接收机观测数据的影响与多径信号的延迟、幅度、相位等特性参数有关,造成的伪距测量误差高于载波相位测量误差2个数量级。多径抑制是GNSS接收机关键性能指标之一,GNSS接收机主要从试验室模拟环境和实际工作环境两方面检测多径抑制性能,多径误差包络检测技术利用模拟导航信号源完成多径抑制性能检测,码减载波和多径误差分析都是通过接收观测卫星导航信号并进行数据分析完成多径抑制性能的检测。     

GNSS接收机最优中频积累时间研究

分段相关-视频积累是一种典型的雷达信号检测方法,同时也可用于全球定位系统(GPS)或伽利略系统的卫星信号检测。该文重点分析了载波多普勒条件下分段相关-视频积累检测方法的性能,推导了平均处理损耗公式。在给定最大多普勒频偏和载噪比的情况下,采用平均处理损耗最小准则,分析了全球卫星导航(GNSS)接收机最优中频积累时间的计算方法和变化规律。在载噪比45 dB-Hz和最大多普勒频偏2000 Hz的条件下,该算法比经典算法减小了13.5%的平均处理损耗。     

Multipath effects on vector tracking algorithm for GNSS signal

The vector tracking algorithm uses a single extended Kalman filter （EKF） to predict the time-delays and the Doppler deviations of the GNSS signal, while also estimating the user＇s position, velocity, and clock state. In this paper, the effects of multipath on the tracking performance of the vector delay / frequency lock loop （VDFLL） is studied for better application in the multipath environment. The error expressions of the measurements are given in theory. The tracking error caused by multipath is reduced by VDFLL, which is proved by the tracking error of VDFLL through a new iterating method. The theoretical analysis is verified by the Monte Carlo simulation.     

基于多源数据结构融合的车轮滑转率测量方法

滑转率是轮式车辆运动状态的重要参数,该值过大严重影响牵引效率、油量消耗以及行驶安全;实时精准检测车轮瞬时滑转率是车辆优化控制的关键技术;当车辆在被各种土质或植被覆盖的田地里或复杂地形的环境中低速作业时,传统方法难以精准测量该动态参数;文中采用新测量方法:采集卫星导航、微惯导和轮速等多源信息;依据检测点的空间结构关系,建立多源数据结构融合算法(multi-source data structured fusion,MDSF);实时测量各车轮的瞬时滑转率;模拟仿真与实测试验的结果表明:(1)轮向速度相对误差2.43％,轮转速相对误差0.54％,使滑转率误差小于3.00％;(2)实测数据准确反映车辆运动中的动力学关系,实时体现左右车轮各自的动态特性.     

抗差自适应Kalman滤波及其在GNSS导航中的应用

针对Kalman滤波易受粗差影响而导致结果失真的问题,提出一种抗差自适应Kalman滤波方法,该方法结合自适应滤波与抗差Kalman滤波的优点,同时设计自适应因子和抗差因子,采用改进的两段Huber函数与2~3倍的观测噪声中误差来充当抗差因子与粗差判别标准。并对Kalman滤波和抗差自适应滤波(Adaptive Robust Kalman Filtering,ARKF)结果进行比较。车载实验结果表明,ARKF可以有效抵制观测异常对状态估值的影响,同时在系统先验信息不能精确给出的情况下,显著改善了滤波估值的稳定性和可用性。     

Robust Stabilization of Discrete time Constrained Singular Piecewise affine Systems with Norm bounded Uncertainties

In this paper,the problem of designing robust H-infinity output feedback controller and l2-gain controller are investigated for a class of discrete-time singular piecewise-affine systems with input saturation and state constraints. Based on a singular piecewise Lyapunov function combined with S-procedure and some matrix inequality convexifying techniques,the H-infinity stabilization condition is established and the l2-gain controller is investigated,and meanwhile,the input saturation disturbance tolerance condition is proposed. Under energy bounded disturbance,the domain of attraction is well estimated and the l2-gain controller is designed in some restricted region. It is shown that the controller gains can be obtained by solving a family of LMIs parameterized by one or two scalar variables. Meanwhile,by using the corresponding optimization methods,the domain of attraction and the disturbance tolerance level is maximized,and the H-infinity performance γ is minimized.Finally,numerical examples are given to illustrate the effectiveness of the proposed design methods.