Association-Based Active Access Control models with balanced scalability and flexibility

In existing Active Access Control (AAC) models, the scalability and flexibility of security policy specification should be well balanced, especially: (1) authorizations to plenty of tasks should be simplified; (2) team workflows should be enabled; (3) fine-grained constraints should be enforced. To address this issue, a family of Association-Based Active Access Control (ABAAC) models is proposed. In the minimal model ABAAC₀, users are assigned to roles while permissions are assigned to task-role associations. In a workflow case, to execute such an association some users assigned to its component role will be allocated. The association's assigned permissions can be performed by them during the task is running in the case. In ABAAC₁, a generalized association is employed to extract common authorizations from multiple associations. In ABAAC₂, a fine-grained separation of duty (SoD) is enforced among associations. In the maximal model ABAAC₃, all these features are integrated, and similar constraints can be specified more concisely. Using a software workflow, case validation is performed. Comparison with a representative association based AAC model and the most scalable AAC model so far indicates that: (1) enough scalability is achieved; (2) without decomposition of a task, different permissions can be authorized to multiple roles in it; (3) separation of more fine-grained duties than roles and tasks can be enforced.     

Unlocking the value of flexibility of behind-the-meter prosumers: An overview of mechanisms to esteemed trends

Behind-the-meter (BTM) resources is being recognized as a viable solution to offer grid services including flexibility procurement which is required for volatile renewable power systems. This paper brings an overview of current and esteemed frameworks and respective challenges revolving around BTM flexibility notion and mechanisms. To begin with, we review grid architectures, e.g., microgrids and virtual power plants, capable of accommodating BTM flexibility and desirable flexibility market designs, including peer-to-peer trading. The role of machine learning initiatives, including reinforcement learning and probabilistic forecasting, in designing reliable energy management systems is extensively deliberated. Last but not least, supplementary discussions in making this concept a reality, which can be regarded as future research, are given.     

Modular architecture of the microfactories for automatic micro-assembly

The construction of a new generation of MEMS which includes micro-assembly steps in the current microfabrication process is a big challenge. It is necessary to develop new production means named micromanufacturing systems in order to perform these new assembly steps. The classical approach called “top-down” which consists in a functional analysis and a definition of the tasks sequences is insufficient for micromanufacturing systems. Indeed, the technical and physical constraints of the microworld (e.g. the adhesion phenomenon) must be taken into account in order to design reliable micromanufacturing systems. A new method of designing micromanufacturing systems is presented in this paper. Our approach combines the general “top-down” approach with a “bottom-up” approach which takes into account technical constraints. The method enables to build a modular architecture for micromanufacturing systems. In order to obtain this modular architecture, we have devised an original identification technique of modules and an association technique of modules. This work has been used to design the controller of an experimental robotic micro-assembly station.     

Multi-objective FMS process planning with various flexibilities using a symbiotic evolutionary algorithm

This paper presents an evolutionary algorithm, called the multi-objective symbiotic evolutionary algorithm (MOSEA), to solve a multi-objective FMS process planning (MFPP) problem with various flexibilities. The MFPP problem simultaneously considers four types of flexibilities related to machine, tool, sequence, and process and takes into account three objectives: balancing the machine workload, minimizing part movements, and minimizing tool changes. The MOSEA is modeled as a two-leveled structure to find a set of well-distributed solutions close to the true Pareto optimal solutions. To promote the search capability of such solutions, two main processes imitating symbiotic evolution and endosymbiotic evolution are introduced, together with an elitist strategy and a fitness sharing scheme. Evolutionary components suitable for the MFPP problem are provided. With a variety of test-bed problems, the performance of the proposed MOSEA is compared with those of existing multi-objective evolutionary algorithms. The experimental results show that the MOSEA is promising in solution convergence and diversity.     

OPTIMAL CONTROL OF THE FLEXI- BLE LINK MANIPULATOR WITH CONTROLLABLE LOCAL DEGREES OF FREEDOM

Although flexible manipulators own many potential advantages, one of their major disadvantages is the deterioration of the end-effector accuracy due to the flexibility. Therefore, how to reduce vibration is a significant problem. Inspired by the observation on the motion behaviors of animals, a new idea of decreasing motion deflection of the flexible manipulator is suggested. The concept of controllable local degrees of freedom is proposed and analyzed. By way of optimizing local motion provided by the controllable local degrees of freedom, the end-effector deflection of the flexible manipulator can be effectively decreased through dynamic coupling. The corresponding optimal method for vibration control of the flexible manipulator is put forward. The kinematic simulation is carried ant on a three-link flexible manipulator The corresponding results verify the feasibility of this method.     

制造系统柔性评价方法研究

深入分析评价制造系统柔性的基本要求,并介绍柔性熵的概念,建立评价系统柔性的数学模型。通过实例分析,证明该模型对评价制造系统柔性有一定的价值。     

Electromechanical properties of printed copper ink film using a white flash light annealing process for flexible electronics

We report on a systematic study of the electromechanical properties of flexible copper (Cu) thin film for flexible electronics. Cu ink is synthesized with chemical reduction process. Cu ink film spin-coated on a polyimide substrate is annealed with white flash light, also known as intense pulsed light (IPL), which guarantees a room temperature and sub-second process in ambient conditions. IPL annealed Cu film shows the electrical resistivity of 4.8 μΩ cm and thickness of 200 nm. The electromechanical properties of IPL annealed Cu film are investigated via outer/inner bending, stretching, and adhesion tests, and it is compared with conventional electron-beam evaporated Cu film. IPL annealed Cu film shows a constant electrical resistance within a bending radius of 6 mm. The bending fatigue test shows that the Cu film can withstand 10,000 bending cycles. In the stretching test, the Cu film shows a 50% increase in resistance when a strain of 2.4% was induced. At 4% strain, the resistance increases more than 200%. Meanwhile, the electron-beam evaporated film shows a constant resistance up to a strain of 4%. Lower stretchability of IPL annealed Cu film is attributed to its inherent cracks and porous film morphologies. IPL annealing induces the local melting at the interface between the substrate and Cu film, which increases the adhesion strength of the Cu film. These results provide useful information regarding the mechanical flexibility and durability of the nanoparticle films for the development of flexible electronics.     

Cone-shaped hollow flexible reinforced concrete foundation (CHFRF) – Innovative for mountain wind turbines

This paper presents an innovative type of mountain wind turbine foundation, namely, the cone-shaped hollow flexible reinforced concrete foundation (CHFRF). It consists of a top plate, a base plate and a side wall that are made of reinforced concrete. The cavity of the CHFRF is filled with rubble and soil directly from the excavation for the CHFRF, which means that it can absorb the spoil. A rubber layer is placed beneath the CHFRF to increase the foundation flexibility to resist cyclic and dynamic loadings and to increase the bearing capacity. The great advantages of the CHFRF are the reduction in the usage of concrete and steel and the protection of the vegetation around the wind turbine, compared with conventional mountain wind turbine foundations that are solid structures. It is verified through model tests and a numerical simulation that the CHFRF can provide higher lateral bearing capacity in comparison to the regular circular gravity-based foundation under the same foundation diameter and height, and that the bearing capacity is increased by approximately 33.5% accordingly. It is also found that the rubber layer can effectively reduce the accumulated rotation of the CHFRF under cyclic loading. The accumulated rotation of the CHFRF with a rubber layer having a thickness of 4 mm is decreased by about 50% compared to that of the CHFRF with a rubber layer having a thickness of 2 mm. In addition, the volume of concrete used for the CHFRF is only one-fifth of that used for the circular gravity-based foundation. Therefore, the CHFRF outperforms regular mountain wind turbine foundations.     

从用户角度看芯片贴装头技术

现代制造商一直特别看重在变动过程中迅速重新配置平台型贴装机的灵活性,以便能够对变动后的产品实现最优的贴装能力.现在,平台型贴装设备上提供的新一代贴装头技术扩展了这些系统的能力,可以提供高速芯片贴装功能,实现能够在不需重新配置,不会影响精度、良品率或产能的情况下,贴装常用的各种元件.它能使未来几代装配商将从更加灵活、自适应和精确的贴装头中受益,他们将提高利用率,大大降低变动时间,明显减少支持高速度、低成本、快速交货周期制造环境所需的反应时间.     

Luminescence modulation of the Eu3+ doped Srn+1SnnO3n+1 (n=1, 2, 5, ∞) ceramics based on photochromism and its application in anti-counterfeiting technology

The structure and optical properties of Sr_n+1Sn_nO_3n+1 ceramics greatly depend on the n value. Thus, we fabricated four compositions, namely Sr_n+1Sn_nO_3n+1:Eu³⁺ (n = 1, 2, 5, ∞) ceramics, and their crystal structure, photoluminescence, photochromism and luminesce modulation properties have been investigated. It is found that excellent photochromism and luminesce modulation properties are found in Sr₂SnO₄:Eu³⁺ and Sr₃Sn₂O₇:Eu³⁺ ceramics. After 280-nm light irradiation, the Sr₂SnO₄:Eu³⁺ ceramics transform into gray purple from primal white. Meanwhile, luminescence intensity decrement ratio ΔI_dec of the colored Sr₂SnO₄:Eu³⁺ reaches a high value of 80.8% under optimized irradiation wavelength. The decreased luminescence intensity of Eu³⁺ can be completely recovered via 450-nm light irradiation. The ΔI_dec of Sr₃Sn₂O₇:Eu³⁺ ceramic reaches 53.1%, and the decreased luminesce intensity can not be covered by light irradiation, only can be covered by a high temperature stimulus at 400 °C. Finally, we successfully fabricated a flexible membrane using Sr₂SnO₄:Eu³⁺ and PDMS for anti-counterfeiting applications.