单晶钛酸铋纳米片的XPS和Raman特性

以Bi（NO3）3·5H2O和Ti（OC4H9）4为原料，NaOH为矿化剂，采用水热法制备了形貌规则的单晶Bi4Ti3O12纳米片。X射线衍射（XRD）结果表明，所合成的产物为正交相层状钙钛矿结构的Bi4Ti3O12。场发射扫描电子显微镜（FESEM）研究显示：样品是由大量边缘尺寸接近200nm，厚度约为15nm的片状结构组成。利用X射线光电子能谱（XPS）研究产物的化学组分和价态分布。室温拉曼光谱研究表明，Bi4Ti3O12纳米片的声子寿命和热稳定性低于相应的块体材料。     

Fabrication of high surface area graphitic nanoflakes on carbon nanotubes templates

Graphitic nanoflakes were fabricated on the carbon nanotubes templates for increasing the surface area utilizing bias assisted microwave plasma enhanced chemical vapor deposition (MWPECVD). The analysis of morphologies and structures were achieved by means of scanning electron microscopy and transmission electron microscopy. The surface area of graphitic nanoflakes, carbon nanotubes (CNTs) and graphitic nanoflakes/CNTs were 57.44 m²/g, 90.31 m²/g and 130.96 m²/g from BET measurement, respectively. The cyclic voltammetry was used to calculate the active area of platinum catalysts in 1 M sulfuric acid from hydrogen adsorption peak. An enhancement of activity could be observed from the calculation of CV results. This may be attributed to the small particle size and high dispersion of platinum particles coated on graphitic nanoflakes/CNTs. These high surface area materials could be used as catalysts supports or electrode for fuel cell applications.     

Graphene oxide nanoflakes from various agrowastes

Nowadays, the synthesis of graphene/ graphene oxide from graphite precursor using oxidizing agents is the most common procedure, but the direct synthesis of graphene or graphene oxide from a non-graphitic carbonaceous material without using inert atmosphere is really a great challenge. Besides, the chemistry behind the development of graphitic structure from a non-graphitic material during the thermal heating is still not clearly understood. In this research work, three agrowaste materials viz. rice husk, sugarcane bagasse and newspaper were selected and subjected to pyrolysis in presence of trace amount of air. The continued heating at the optimum temperature has resulted in aromatization and condensation along with the oxidation within the cellulosic structure of the agrowaste, which finally resulted in the formation of graphene oxide nanoflakes directly. The mechanism of formation of graphene oxide from these agrowaste materials was studied, which suggested that any carbonaceous waste materials can be converted to graphene oxide by optimizing the thermal heating conditions.     

Growth of Ultraflat PbI2 Nanoflakes by Solvent Evaporation Suppression for High‐Performance UV Photodetectors

2D lead iodide (PbI₂) is attracting great interest due to its great potential in the application of UV photodetectors. In this work, a facile solution‐based method is developed to synthesize ultraflat PbI₂ nanoflakes for high‐performance UV photodetectors. By maintaining at proximate room temperature and adding an evaporation suppression solvent for slow‐rate crystal growth, high‐quality PbI₂ nanoflakes with an ultraflat surface are obtained. The UV photodetectors based on 2D PbI₂ nanoflakes exhibit a high photoresponsivity of 0.51 A W^?1, a high detectivity of 4.0 × 10¹⁰ Jones, a high external quantum efficiency (EQE) of 168.9%, and a rapid response speed including a rise time of 14.1 ms and a decay time of 31.0 ms. The balanced and excellent photodetector performance of these devices paves the road for practical UV photodetection based on 2D PbI₂ nanoflakes.     

Pulverization-Tolerant CuSe Nanoflakes with High (110) Planar Orientation for High-Performance Magnesium Storage

Copper chalcogenides are of great interest as conversion-type cathode materials due to their large specific capacity for rechargeable magnesium batteries, yet are subjected to severe capacity fading brought about by structure collapse in repetitive charge–discharge cycling. Herein, single-crystalline and (110) preferentially oriented CuSe nanoflakes are designed via a temperature-controlled crystal growth route under microwave irradiation. The as-prepared CuSe nanoflake cathode materials can present high reversible capacity (204 mAh g⁻¹ at 200 mA g⁻¹ current density), outstanding rate capability, and remarkable long-term cycling stability (≈0.095% capacity decay per cycle at 1 A g⁻¹ within 700 cycles). The multistep reversible conversion mechanism of the CuSe nanoflake cathode materials is evidenced by ex situ X-ray photoelectron spectroscopy and X-ray diffraction. Structure evolution investigation suggests that the single-crystalline CuSe nanoflakes can exhibit relatively durable structural stability. The desirable cycling stability can be ascribed to the excellent pulverization-tolerance of the CuSe nanoflake cathode materials endowed by the multistep reversible conversion mechanism and the single-crystalline feature. Furthermore, the preferentially-oriented (110) active plane is favorable for electrochemical reactions to ensure high specific capacity. This work can afford a crystal engineering strategy to fabricate high-performance conversion-type electrode materials for rechargeable magnesium batteries.     

ZnO微纳米结构的制备及其光学性能

在没有催化剂的情况下,空气中直接加热氧化锌片成功制备出ZnO纳米线/纳米片.通过改变反应温度,分别能够获得紧密排列的ZnO纳米线和纳米片.ZnO纳米线和纳米片的直径为几个微米,厚度约为280 nm.室温光致发光测试研究表明其最大可见发射波长在508 nm.该研究工作为纳米器件研制提供了一种简单直接氧化方法,可望高产率制备高质量半导体纳米线和纳米片阵列.     

Structural and photoluminescence studies of Eu3+ doped zinc oxide nanorods prepared by precipitation method

Trivalent europium doped zinc oxide (ZnO:Eu3+) nanocrystals were synthesized via room temperature chemical co-precipitation and they were systematically characterized by means of X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and photoluminescence (PL) spectroscopy. The as-synthesized samples were found to have hexagonal wurtzite coexisted with the intermediate Zn5(OH)8Cl2·H2O phase, while the single hexagonal phase was facilitated due to the calcinations. The as obtained samples were broadly composed of nanoflakes while the highly crystalline nanorods were formed due to low temperature annealing of the as-synthesized samples. The crystallite size of the nanoflakes and nanorods (40-90 nm) were extracted from the XRD pattern which was found to be consistent with scanning electron microscopy (SEM) measurements. The photolumi-nescence (PL) spectra of nanophosphors showed bright red and orange emissions at 618 and 594 nm respectively with efficient broad blue green emission spectrum due to ZnO lattice. Further, a good energy transfer process from ZnO host to Eu3+ was observed in PL emission and excitation spectra of Eu3+ doped ZnO ions. In all, the present nanophosphors were found to have great potentiality for bio-applications.     

Scalable preparation of carbon nanoparticles and graphene nanoflakes using sand paper abrasion

The commercial demand for carbon nanoparticles and graphene nanoflakes are high due to their diverse usage over the past few years. However, large scale production processes are quite laborious and time consuming relying mainly on high energy and inert atmospheric condition. Herein, the abrasion technique has been utilized to exfoliate carbon nanoparticles and graphene nanoflakes from willow charcoal stick and graphite rod, respectively. The role of sandpaper in polishing is quite immense for the isolation of nanocarbons from willow charcoal and graphite. Transmission electron microscope (TEM) confirmed the formation of carbon nanoparticles whereas, high resolution transmission electron microscope (HRTEM) and atomic force microscope (AFM) topography revealed the formation of few layers of graphene nanoflakes. This entire green process was economically viable for scalable preparation of nanocarbons at room temperature and completely independent of inert conditions, usage of solvents, chemicals and the problem of by-product formation.))     

Manganese Dioxide Coated WS2@Fe3O4/sSiO2 Nanocomposites for pH‐Responsive MR Imaging and Oxygen‐Elevated Synergetic Therapy

Recently, the development of multifunctional theranostic nanoplatforms to realize tumor‐specific imaging and enhanced cancer therapy via responding or modulating the tumor microenvironment (TME) has attracted tremendous interests in the field of nanomedicine. Herein, tungsten disulfide (WS₂) nanoflakes with their surface adsorbed with iron oxide nanoparticles (IONPs) via self‐assembly are coated with silica and then subsequently with manganese dioxide (MnO₂), on to which polyethylene glycol (PEG) is attached. The obtained WS₂‐IO/S@MO‐PEG appears to be highly sensitive to pH, enabling tumor pH‐responsive magnetic resonance imaging with IONPs as the pH‐inert T2 contrast probe and MnO₂ as the pH‐sensitive T1 contrast probe. Meanwhile, synergistic combination tumor therapy is realized with such WS₂‐IO/S@MO‐PEG, by utilizing the strong near‐infrared light and X‐ray absorbance of WS₂ for photothermal therapy (PTT) and enhanced cancer radiotherapy (RT), respectively, as well as the ability of MnO₂ to decompose tumor endogenous H₂O₂ and relieve tumor hypoxia to further overcome hypoxia‐associated radiotherapy resistance. The combination of PTT and RT with WS₂‐IO/S@MO‐PEG results in a remarkable synergistic effect to destruct tumors. This work highlights the promise of developing multifunction nanocomposites for TME‐specific imaging and TME modulation, aiming at precision cancer synergistic treatment.