探地雷达在地下管线探测中的应用

探地雷达技术是如今适应快速、准确、无损地探测地下障碍物而迅速发展的电磁技术。文中介绍了探地雷达的工作原理及工作方式，并通过结合工程实例来探讨探地雷达在地下管线探测中的广泛应用。     

横流环境中射流的数值研究

本文采用标准的k-ε模型及混合有限分析法对均匀横流环境中的铅直圆形射流进行了(射流比0.5～8)数值分析。所得射流轨迹线与实验资料吻合良好，且与理论分析得出了各种射流比(射流出流速度与横流速度之比)情况下的射流轨迹线、对称面上的内外边界线的统一数学表达式，得出了水平面上示踪质影响的最大宽度、射流横断面浓度最大值偏离射流中心值与射流比的关系式，还得出了射流是否发生附壁及产生分叉现象的界限值。文中数值结果清晰地显示射流背流面存在马蹄形的流动结构。     

Passive least-squares-type estimation algorithm for direct adaptive control

The standard least squares (LS) estimation algorithm is modified in such a way that it becomes passive. Therefore the scope of application of the LS algorithm is extended to those adaptive schemes whose convergence proof is based on passivity. The passive version of LS is presented in both continuous and discrete time.     

Determining stress intensity factors of composites using crack opening displacement

The main purpose of this paper is to find the mixed-mode stress intensity factors of composite materials using the crack opening displacement (COD). First, a series solution of the composite material with a crack was used to evaluate COD values. Then, the least-squares method was used to calculate mixed-mode stress intensity factors. This algorithm can be applied to any method that generates or measures COD values. The major advantage of this method is that COD values very near the crack tip are not necessary. Both finite element simulations and laboratory experiments were applied to validate this least-squares method with acceptable accuracy if the even terms of the series solution are removed.     

大规格圆钢质量分析和控制

针对湘钢棒材厂生产大规格圆钢出现的表面质量问题，重点介绍了在成品轧机后采用U形辊道和立活套替换棍道；冷床输入辊道采用镶WT合金套；增设高压水除鳞装置；中间轧件尺寸精度控制等措施，成功的解决了大规格圆钢表面擦伤、“麻面”、尺寸超差等表面质量问题，产品质量显著提高。     

不锈钢绕带容器环板与绕带端头的焊接

本文通过焊接试验对奥氏体不锈钢绕带容器环板与绕带焊接工艺进行了研究分析,并得出了合理的焊接方法和工艺参数。     

3D圆阀塔板性能研究

介绍了3D圆阀塔板的结构特点和实验研究情况。以空气和水为工质进行了冷模实验,研究了3D圆阀塔板的塔板压降、雾沫夹带量和泄漏量等流体力学性能。利用氧解吸法测定其塔板效率,并在相同条件下与F1浮阀塔板进行了对比实验。结果表明,在相同条件下,3D圆阀塔板比传统F1浮阀塔板的塔板效率提高5%~15%,塔板压降约低100 Pa,泄漏量和雾沫夹带量与F1浮阀塔板基本相当,是一种综合性能优良的新型浮阀塔板。     

圆钢锭浇铸工艺试验

在不同锭型钢中A1含量及S含量、浇铸温度及浇铸时间等试验工艺条件下,对模铸20管钢、φ450mm、2.1t(圆波浪形)钢锭裂纹率的影响进行了分析与讨论,并确定了主要工艺参数。     

整体成型钼园舟研究

本研究采用特殊的方法制取钼园舟，研究结果表明，获得了满意的结果。     

Runout analysis in fatigue investigation

Those individual tests in a series of experiments that are not completed or must be suspended are known as “censored points,” or “runouts”. Inclusion of runouts in data analysis can be problematic, and such ad hoc approaches as ignoring the runout observation or treating it as a failure can significantly affect estimation. The methodology offered here alleviates the handling of runouts and censored data by using the maximum likelihood estimation (MLE) method to incorporate the censored data properly. The methodology is illustrated with an example problem using actual data and the affects of ad hoc approaches are illustrated.