新疆和田地区耕地面源污染生态风险评价

随着化肥、农膜等在农业生产中的过量投入，耕地面源污染的程度随之加重。文章选取塔里木河流域上游和田地区为研究区域，依据P-S-R框架理论，构建和田地区耕地面源污染生态风险评价指标体系，加入土壤理化数据，使用生态风险评价模型对和田地区1980 年及2016 年耕地面源污染状况进行生态风险评价，运用耕地生态风险模型、生态风险转移矩阵、Arcgis分析和田地区耕地面源污染时空分异状况。研究结论如下：和田地区1980 年耕地生态风险等级均为II级或III级，呈“中间高，两侧低”分布；2016 年耕地生态风险等级上升至IV级或V级，呈“倒W型”分布，各县耕地面源污染程度较1980 年均有较大幅度的上升，其中墨玉县和于田县在2016 年耕地生态风险等级达到最高的V级，而民丰县因自身生态环境的强脆弱性，同样需要提高关注。根据面源污染“从源头治理”的原则，应切实推进和田地区耕地生态环境保护与治理，提高政府重视程度，增强技术指导，开展试点工作，改善和田地区耕地面源污染现状。     

张掖盆地地下水硝酸盐污染与人体健康风险评价

地下水是张掖盆地的重要水资源，其硝酸盐污染尚未得到足够重视。对张掖盆地2004、2015年地下水硝酸盐浓度进行了系统分析，并采用美国环境保护署（USEPA）推荐的健康风险评价模型评估了地下水硝酸盐的健康风险。结果表明：自2004年以来张掖盆地地下水硝酸盐污染日趋严重。2015年硝酸盐浓度最高已达到283.32 mg·L^-1，17.61%的采样点硝酸盐氮浓度超过GB5749-2006《生活饮用水卫生标准》中饮用地下水限量值（20 mg·L^-1）。研究区人群经皮肤接触途径摄入硝酸盐的健康风险在可接受水平，而饮水摄入硝酸盐的健康风险较高，总风险中饮水途径引起健康风险的贡献率占99.40%，远大于皮肤接触途径。儿童经饮水摄入和皮肤接触两种途径的健康风险均显著高于成人，分别为成人的1.544倍和1.039倍。32.39%的采样点地下水硝酸盐对儿童的健康风险超出了可接受水平，14.79%的采样点地下水硝酸盐对成人的健康风险不可接受。甘州区城区、临泽县北部边缘及高台县城区周围硝酸盐浓度最高，这些区域内所有人群都面临硝酸盐引发的高健康风险，其余区域硝酸盐引发的健康风险相对较低。     

基于VSD模型的铁山港湾红树林生态系统脆弱性初步评价

基于脆弱性域图 (vulnerability scoping diagram, VSD)评价模型, 从暴露程度、敏感性、适应能力3个方面构建了红树林生态系统脆弱性评价指标体系。采用改进的综合指数法和模糊综合评价法, 重新定义脆弱性分级标准, 定量评价了铁山港湾红树林生态系统在1989年、2003年和2014年3个年份的脆弱性水平。结果显示, 铁山港湾红树林生态系统在3个年份的脆弱性水平值分别为0.145、0.255、0.334, 呈现增加趋势。首先, 铁山港湾红树林生态系统面临的暴露程度不断增大, 主要胁迫因子为滩涂围垦面积、废水排放量; 其次, 生态系统的敏感性增强, 主要敏感因子是海洋生物质量综合指数、底栖生物和潮间带生物多样性指数; 第三, 生态系统的适应能力略有增加, 总体上较弱。     

基于ASP.NET MVC的海域海岸带整治修复项目信息管理系统的设计和实现

文章在国家大力开展海域海岸带整治修复的背景下,利用Visual Studio 2013开发平台和SQL Server 2014数据库软件,采用ASP.NET MVC架构设计海域海岸带整治修复项目信息管理系统,实现整治修复项目信息的快速录入,并可进行查询、展示和互动等操作。相比传统信息管理系统,本系统大大提高了可维护性、可扩展性、灵活性和封装性,可促进我国海域海岸带整治修复项目信息管理实现现代化。     

Damage assessment for submarine photoelectric composite cable under anchor impact

The impact of dropped anchor on submarine photoelectric composite cables may possibly cause electrical faults, i.e. electricity and optical signal transmission failure. In order to study the impact capacity and structural impact failure mechanism, a test setup is designed originally to examine the structural and functional integrity. A detailed finite element model (FEM) is created, considering material nonlinearity and component interaction. A parametric analysis has been performed to predict the deformation of components and impact forces, under different impact velocities and collision directions. Relationships between the armor layer indentation rate and that of internal power and optical units are achieved. The impact deformation of internal entities can be evaluated intuitively by armor layer indentation. The proposed experimental and numerical methods are well correlated, suitable to assess the impact capacity of subsea power cables and assist the protection design of subsea power cables in engineering.     

GRADATION AND ASSESSMENT OF DAMAGE DEGREE OF NATURAL LANDSCAPE IN XING, AN COUNTY, GUANGXI

A new technique designed to help quantify the degree of damage to the landscape from one area to another shows a close relationship between population density and the degree of landscape damage. The technique establishes a scale of damage from 0 to 5 (zero = no damage; 5 = severe damage) using data from aerial photographs, land-use maps, and field data. The related formula allows one to compare the relative degree of damage across regions using a combination of an absolute index, a theoretical index, a relative index, and population density. Xing'an County is used to demonstrate the technique.     

Reliability assessment of granular filters in embankment dams

Empirical criteria have been used successfully to design filters of most embankment large dam projects throughout the world. However, these empirical rules are only applicable to a particular range of soils tested in laboratory and do not take into account the variability of the base material and filter particle sizes. In addition, it is widely accepted that the safety of fill dams is mainly dependent on the reliability of their filter performance. The work herein presented consists in a new general method for assessing the probability of fulfilling any empirical filter design criteria accounting for base and filter heterogeneity by means of first‐order reliability methods (FORM), so that reliability indexes and probabilities of fulfilling any particular criteria are obtained. This method will allow engineers to estimate the safety of existing filters in terms of probability of fulfilling their design criteria and might also be used as a decision tool on sampling needs and material size tolerances during construction. In addition, sensitivity analysis makes possible to analyse how reliabilities are influenced by different sources of input data. Finally, in case of a portfolio risk assessment, this method will allow engineers to compare the safety of several existing dams in order to prioritize safety investments and it is expected to be a very useful tool to evaluate probabilities of failure due to internal erosion. Copyright © 2006 John Wiley & Sons, Ltd.     

测绘科技进步的研究与测算

科技进步是测绘事业发展的动力 ,讨论运用科技进步的评价指标 ,对测绘单位的科技进步速度和对经济增长的贡献等进行测算和分析 ,可以为测绘规划管理及决策提供参考。     

测绘生产计划统计管理应用系统的建立

基于windows软件平台及foxpro工具软件开发的“测绘生产计划统计管理应用系统 (PPCMAS)”是一种较为科学的测绘生产管理模式 ,具有较先进的技术性和通用性 ,并以多媒体方式实现信息查询和综合统计图形显示、文字说明及统计报表 ,解决了规划和管理等问题 ,提供了数据录入、资源查询、统计生成、专家系统壳、显示输出、信息通讯等多方面的功能     

测绘项目管理实施引论

根据我国测绘生产单位的实际情况 ,测绘项目管理的具体实施大致包括对项目的识别、选定、启动与筹集资金、计划、成本估算、执行计划、控制、收尾等主要步骤。当项目确定后 ,需要启动和筹集资金。而计划是项目管理的基本组成部分 ,包括明确项目目标和工作范围。项目成本估算有因素估算法和利用WBS方法的详细估算。项目质量管理规划的依据有质量目标、范围说明、标准和规范等。