Description of the thermodynamic properties and fluid-phase behavior of aqueous solutions of linear,branched, and cyclic amines

The SAFT-γ Mie group-contribution equation of state is used to represent the fluid-phase behavior of aqueous solutions of a variety of linear, branched, and cyclic amines. New group interactions are developed in order to model the mixtures of interest, including the like and unlike interactions between alkyl primary, secondary, and tertiary amine groups (NH₂, NH, N), cyclic secondary and tertiary amine groups (cNH, cN), and cyclic methine-amine groups (cCHNH, cCHN) with water (H₂O). The group-interaction parameters are estimated from appropriate experimental thermodynamic data for pure amines and selected mixtures. By taking advantage of the group-contribution nature of the method, one can describe the fluid-phase behavior of mixtures of molecules comprising those groups over broad ranges of temperature, pressure, and composition. A number of aqueous solutions of amines are studied including linear, branched aliphatic, and cyclic amines. Liquid–liquid equilibria (LLE) bounded by lower critical solution temperatures (LCSTs) have been reported experimentally and are reproduced here with the SAFT-γ Mie approach. The main feature of the approach is the ability not only to represent accurately the experimental data employed in the parameter estimation, but also to predict the vapor–liquid, liquid–liquid, and vapor–liquid–liquid equilibria, and LCSTs with the same set of parameters. Pure compound and binary phase diagrams of diverse types of amines and their aqueous solutions are assessed in order to demonstrate the main features of the thermodynamic and fluid-phase behavior.     

渤海绥中油田J3井疏水缔合聚合物驱数值模拟研究

为了进一步提高渤海油田J3井区缔合聚合物驱的技术经济效果,在渤海油田室内配方和先导性矿场试验研究基础上,利用化学驱油藏数值模拟软件FAPMS,分析和研究了高浓度缔合聚合物前置段塞、主段塞的大小和浓度以及段塞组合方式对驱油效果的影响,优化设计了渤海绥中油田J3井区块矿场试验的最佳注入程序及段塞大小。结果表明,通过对不同浓度的疏水缔合聚合物注入的前置段塞及主段塞和梯度式后续段塞的优化后,原油采收率比未优化时提高了约10个百分点。研究表明,渤海油田应该高度重视聚合物驱的注入方式和段塞优化设计,进一步提高聚合物的技术经济效果。     

疏水缔合型聚丙烯酰胺的合成与性能评价

为了提高高相对分子质量的聚丙烯酰胺的抗温抗盐性能,利用自制的两亲表面活性单体与丙烯酰胺共聚合成了疏水缔合型聚丙烯酰胺并进行室内评价。结果表明,在高温、高盐、高钙条件下,合成的疏水缔合型聚丙烯酰胺具有良好的增粘性和较强的热稳定性;克服了疏水缔合型聚合物在盐水中溶解性差的问题,可用各种矿化度的盐水和油田产出污水配制;具有良好的无机盐增粘性能和抗温性能。     

疏水缔合AM/C10AM/AMPS三元共聚物的合成与盐水溶液粘度性能

采用胶束氧化还原聚合方法合成了AM/C10AM/AMPS三元疏水缔合共聚物。简介了合成过程,给出了主要的合成参数。保持其他合成条件不变,分别改变疏水单体N 癸基丙烯酰胺C10AM和阴离子单体2 丙烯胺基 2 甲基丙磺酸AMPS在单体总量中的摩尔百分数(0～1.5%和15%～40%),得到了16个共聚物,在45℃、3.67和7.34s-1下测定了用矿化度4000mg/L的模拟大庆盐水配制的1000mg/L共聚物溶液的粘度,讨论了引起粘度变化的原因。有7个样品的粘度能满足大庆油田聚合物驱油的要求(7.34s-1下的粘度大于40mPa·s),其中由1.2%C10AM、35%AMPS及AM合成的共聚物样品粘度最高(61.5mPa·s)。对共聚温度等合成条件的影响作了一般性的讨论。表1参6。     

改性聚丙烯酰胺水溶液的疏水缔合性质

合成了一种疏水缔合水溶性聚丙烯酰胺共聚物，使用荧光光谱法并结合紫外及流变性实验，对制备的疏水缔合水溶性聚丙烯酰胺共聚物在水溶液中形成疏水微区、超分子聚集体及空间网络结构进行了研究，并用扫描电子显微镜证实了溶液中网络结构的存在．     

疏水缔合聚丙烯酰胺溶液性质研究

用粘度法和核孔膜过滤法研究了实验室自制相对分子质量约1000万的疏水缔合聚丙烯酰胺(HAP)溶液的缔合效应,用粘度计考察了电解质浓度、温度和剪切速率对HAP溶液表观粘度的影响,并与相同测试条件下相对分子质量为1770万的部分水解聚丙烯酰胺3530进行对比。结果表明:HAP溶液在70℃的高温和矿化度为5727的高盐条件下,在1000mg/kg附近存在一临界缔合浓度,在临界缔合浓度以上,HAP溶液粘度迅速增加;而3530不存在临界缔合浓度,粘度增加缓慢。浓度为1250mg/kg的HAP溶液通过核孔膜20mL的过滤时间是347.3min,而相同浓度下3530的过滤时间仅为2.1min。浓度为1000mg/kg的HAP溶液即使在矿化度为30000、70℃的高温、30r/min转速的条件下,粘度仍达到32.8mPa·s,而聚合物3530的粘度仅有4.11mPa·s;当剪切速率增加到140r/min、温度为70℃,用矿化度为5727的模拟采出水配制的HAP溶液的粘度为9.21mPa·s,而3530溶液的粘度仅5.18mPa·s。HAP具有良好的耐温抗盐抗剪切能力。     

Effect of charge density,molecular weight,and hydrophobicity on polycations adsorption and flocculation of polystyrene latices and silica

Adsorption and flocculation behavior of two series of synthetic polycations was investigated in dispersions of silica and polystyrene latices with various particle size and surface charge densities. Polycations of the first series (polydiallyldimethyl ammonium chloride‐PDADMAC) varied in molecular weight only, while polycations of the second series (derivatives of polymethacrylic acid) varied in both molecular weight and hydrophobicity. We have found that maximum adsorbed amount of high molecular weight PDADMAC on latex particles was nearly independent of the surface charge density when the particle size was comparable to the polymer coil dimensions in solution. Both low and high molecular weight PDADMACs were efficient flocculants, although significantly lower amounts of high molecular weight polyelectrolyte were required for the phase separation in the dispersions due to particles aggregation through “charge patch” mechanism. The increase of polymer hydrophobicity leads to higher adsorbed amounts and broadening of flocculation window by polycations of the second series on both substrates. However, no strong enhancement of segment–surface interactions on hydrophobic substrates was observed. Since formation of multilayers upon adsorption was also excluded, the difference in adsorption and flocculation behavior was related to the more compact conformation of hydrophobically associating derivatives in solution and at the interface. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3422–3429, 2006     

疏水改性缔合聚合物对含油废水的处理研究与絮凝作用机理

通过絮凝实验考察了自制疏水改性缔合聚合物(Hydrophob ically Mod ified Polym er,简称HPAM)的除油效果,对其絮凝机理进行了探讨,测试了pH值及NaC l浓度对其絮凝效果的影响,由此确定了最佳絮凝条件。研究结果表明,HPAM对于模拟含油废水在pH值为9时,加药量为0.2 mg/L的条件下絮凝效果最佳;HPAM随着盐浓度的升高,黏度增大且絮凝效果提高,表明HPAM以疏水缔合作用为主,具有较好的抗盐性。     

面向对象技术的多元缔合体系闪蒸模拟

用面向对象技术抽象出闪蒸类结构和功能,实现闪蒸类的封装、继承、属性和方法.对缔合体系汽相采用维里方程,液相用UNIQUAC方程修正其非理想性,校正缔合组分汽相焓的计算,建立相平衡模型.用一维或二维New-ton-Raphson法对缔合和一般体系的闪蒸过程方程组进行多元闪蒸分离计算,模拟结果与文献值对比平均卡机对偏差小于2.46%.软件将面向对象技术和缔合物系热力学模型及数值分析方法结合,进行闪蒸单元操作的模拟分离计算.可作为基础模块用于化工过程流程模拟、分析、优化及系统集成开发并可用于实际生产过程的闪蒸计算.     

高分子量水溶性疏水缔合聚合物的合成条件研究

对合成AM/AHAC二元共聚物的引发体系进行了筛选,研究发现,用K2S2O8-DMAAM引发体系合成的聚合物相对分子量高于其它引发体系,并在此基础上进一步考察了DMAAM浓度、单体浓度、反应温度及反应时间对聚合物分子量的影响。结果表明,单体浓度为20%、K2S2O8浓度为80 mg/L,DMAAM浓度为60 mg/L,反应温度为30℃,反应时间为6 h条件下,合成的聚合物分子量较高。