Estimating long-term time-resolved indoor PM2.5 of outdoor and indoor origin using easily obtainable inputs

To evaluate the separate impacts on human health and establish effective control strategies, it is crucial to estimate the contribution of outdoor infiltration and indoor emission to indoor PM_2.5 in buildings. This study used an algorithm to automatically estimate the long-term time-resolved indoor PM_2.5 of outdoor and indoor origin in real apartments with natural ventilation. The inputs for the algorithm were only the time-resolved indoor/outdoor PM_2.5 concentrations and occupants’ window actions, which were easily obtained from the low-cost sensors. This study first applied the algorithm in an apartment in Tianjin, China. The indoor/outdoor contribution to the gross indoor exposure and time-resolved infiltration factor were automatically estimated using the algorithm. The influence of outdoor PM_2.5 data source and algorithm parameters on the estimated results was analyzed. The algorithm was then applied in four other apartments located in Chongqing, Shenyang, Xi'an, and Urumqi to further demonstrate its feasibility. The results provided indirect evidence, such as the plausible explanations for seasonal and spatial variation, to partially support the success of the algorithm used in real apartments. Through the analysis, this study also identified several further development directions to facilitate the practical applications of the algorithm, such as robust long-term outdoor PM_2.5 monitoring using low-cost light-scattering sensors.     

最大塑性功原理在烧结体上限分析中的应用

最大塑性功原理又称第二塑性变分原理，在致密体塑性变形分析叶l是运用能量法进行变形力能计算的基础。本文从分析Drucker公设的亢要条件出发，证明了烧结体塑性变形最大塑性功原理的存在，片在该原理的荩础卜，推导出塑性变形的上限功率表达式，并以平面挤压条件下的上限法应用作为实例加以说明。     

2.5GHz低相位噪声CMOS LC VCO的设计

用0 .35μm、一层多晶、四层金属、3.3V的标准全数字CMOS工艺设计了一个全集成的2 .5 GHz L C VCO,电路采用全差分互补负跨导结构以降低电路功耗和减少器件1/ f噪声的影响.为了减少高频噪声的影响,采用了在片L C滤波技术.可变电容采用增强型MOS可变电容,取得了2 3%的频率调节范围.采用单个16边形的对称片上螺旋电感,并在电感下加接地屏蔽层,从而减少芯片面积,优化Q值.取得了在离中心频率1MHz处- 118d Bc/ Hz的相位噪声性能.电源电压为3.3V时的功耗为4 m A.     

宽带业务发展与"撒手锏"、"产业链"的关系

重点论述下一代网络(NGN)、下一代宽带无线(NGBW)及3G演进中的宽带业务发展与“撒手锏”、“产业链”及持续创新与发展的关系。     

双轴晶体主平面上倍频的相位匹配

从折射率椭球方程和折射率椭球面出发，讨论光束在双轴晶体中传播及偏振的特性、主平面倍频共线相位匹配（PM）问题，得到了双轴晶体主平面内激光所有可能PM倍频的8种偏振组合及其相应的PM角公式、有效非线性（NL）系数deff的一般表达式。结果表明：得到的公式简单，可大大简化PM参数计算及优化设计；折射率椭球面是单层曲面，比双层的折射率面简单；基于折射率椭球面寻找所有可能PM的类型、偏振组合的方法物理图像简明，易于理解，大大降低了双轴晶体PM问题分析的难度。     

引线框架材料QFe2.5加工工艺研究

本文介绍引线框架材料的发展现状，讨论引线框架用铜合金的强化机理，童点阐述引线框架用QFe2．5铜合金带材的性能及主要生产工艺（铸锭加热、热轧、时效退火等）。     

Ta-2．5W焊接工艺试验研究

通过对Ta-2.5W难熔重金属换热管的一系列焊接工艺试验研究,掌握了钽材的特殊焊接技术工艺和要求,满足了今后制造和修复苯胺装置中硫酸蒸发器管束的需要。     

Deorthogonalization of ODS-CDMA QPSK by AM/PM Nonlinearity

When using a conventional demodulator, a sufficient condition to maintain ODS-CDMA codeword orthogonality is constant relative channel amplitude over the codeword duration. When transmitted over a memoryless, AM/PM nonlinearity channel, the chip-to-chip fluctuating amplitude of a composite ODS-CDMA QPSK waveform produces a chip-to-chip fluctuating phase that deorthogonalizes the ODS-CDMA codewords, resulting in an additional multiple access self-interference similar to that found in asynchronous DS-CDMA. For ODS-CDMA QPSK in an AM/PM nonlinearity channel, we utilize the Central Limit Theorem, derive, and evaluate: (i) an expression for the signal-to-distortion ratio at the demodulator output, (ii) an expression for the uncoded bit error probability, and (iii) an upper bound on the convolutionally-coded bit error probability. We find that the degradation to BER depends on both the AM/PM nonlinearity slope and the ODS-CDMA channel loading.     

热等静压技术的发展及应用

在介绍热等静压技术和设备发展的基础上，对其在提高铸件质量以及拓展高速钢、双炼钢和超级双炼钢、高性能陶瓷等新型材料应用领域方面的作用，进行了较全面的阐述。并预计，因热等静压技术所具有的优势，在今后几年其应用增长可达到每年递增15％-20％的水平，且随着其在铝加工工艺中应用的拓展，年增长率可望达到25％。     

非晶Sm5Fe74.3Nb1.5Si11.7B4.5C2.5Cu0.5合金经预退火后的晶化动力学的DTA研究

研究了非晶Sm5Fe74.3Nb1.5Si11.7B4.5C2.5Cu0.5合金经400℃，保温10min预退火后的晶化动力学。结果表明；该合金的晶化相为α-Fe固溶体和Sm2Fe17Cx金属间化合物，两相的晶化表观激活能分别为557KJ/mol和514KJ/mol，当晶化体积分数为60%时，α-Fe相的晶化激活能达极大值；Sm2Fe17Cx相晶化激活能则随其晶化体积分数的增加而逐渐减小。