Nitrogen-doped hierarchically porous carbon obtained via single step method for high performance supercapacitors

In the present work, nitrogen doped hierarchically activated porous carbon (APC) samples have been synthesized via single step scalable method using ethylene di-amine tetra acetic acid (EDTA) as precursor and KOH as activating agent. Activated porous carbons with different pore sizes have been developed by varying the activation temperature. SEM, TEM and SAXS analysis suggest that with variation of activation temperature, a hierarchical porous structure with interconnected meso-pore and micro pores has been achieved. The sufficiently high surface area of the synthesized materials provides active sites to enhance the diffusion of ions between the electrolyte and the carbon electrodes. The electrode prepared at 800 °C activated sample exhibited highest specific capacitance of 274 Fg^-1 in two electrode setup, at a current density of 0.1 Ag^-1 in 1 M aqueous H₂SO₄. Along with this, it showed maximum energy density of 9.5 Whkg^?1 at a power density of 64.5 Wkg^-1. The remarkable electrochemical performance reveals that the synthesized nitrogen doped activated carbon electrodes derived from EDTA can be tuned to have optimum pore structure and pore size distribution for better electrochemical performance, so it can be considered as a potential electrode material for applications in electrochemical energy storage.     

稀土溶液标准物质的研制

选择7种稀土元素:La、Ce、Sm、Eu、Yb、Lu、Y为研究对象,采用高纯稀土氧化物(≥99 99%)为原料,经ICP MS及ICP AES对纯度进行分析后,分别制备成浓度为1000μg mL的稀土溶液标准物质。采用准确、可靠并能溯源的EDTA络合滴定法进行量值核对、均匀性及稳定性检验。对标准物质的不确定度进行了全面的评定。研制的稀土溶液一级标准物质,总不确定度优于0 6%,稳定性达两年以上。     

关于新建炉EDTA低浓度清洗的探讨

阐述了EDTA清洗锅炉的基本原理,低浓度清洗新建炉的工艺、方法及控制要点,EDTA低浓度清洗与协调EDTA清洗的经济性比较,为新建炉EDTA低浓度清洗探索了方向。     

化学成分对红黏土界限含水率的影响

为研究桂林地区红黏土中化学成分Fe₂O₃、Al₂O₃、SiO₂含量对其界限含水率的影响,分别采用蒸馏水和乙二胺四乙酸二钠(EDTA二钠)浸泡红黏土土样,对不同浸泡时间的土样进行化学成分XRF测定,同时进行界限含水率测试和比重试验。通过回归分析和路径分析,建立了以Fe₂O₃、Al₂O₃、SiO₂含量为变量的红黏土界限含水率和相对密度的非线性回归模型,红黏土液限与塑限之间、塑性指数与液限之间以及相对密度与塑限之间的线性回归模型,红黏土Fe₂O₃、Al₂O₃、SiO₂含量与液限、塑限、塑性指数和相对密度之间的路径模型,并分析了化学成分对红黏土界限含水率的影响。     

高分子重金属絮凝剂对镍离子螯合能力的研究

研究了高分子重金属絮凝剂(PEX)对镍离子螯合能力的大小,以含镍水样作为处理对象,通过一系列试验证明:PEX对镍离子的螯合能力强,生成的螯合体溶解度小,对低浓度的镍离子废水处理效果好。废水中一定量的EDTA或Ca2+的存在,不仅不会影响PEX对镍离子的去除,而且会大大促进这一过程。     

硫酸锶晶体生长动力学研究

为了从控制晶体生长角度，说明制备纳米硫酸锶沉淀体系中存在的EDTA对产品粒径的影响作用，根据过程机理，用恒组成法研究硫酸锶晶体生长动力学。根据叠加模型和弱化模型，建立体系中有EDTA存在时，硫酸锶沉淀过程的晶体生长动力学模型。结果表明，硫酸锶沉淀过程中晶体生长属于表面反应控制机理。EDTA存在能降低晶体生长速率，有利于减小粉体粒径。     

Effect of pH, sulfate and sodium on the EDTA titration of calcium

The ethylenediaminetetraacetic acid (EDTA) titration method limits the measurement of calcium concentration to 50 mg/l in water. However, various acids and salt solutions are used in the investigation of the durability of concrete, and the adaptability of the EDTA titration method to determine the calcium in these solutions must be investigated. Hence, the purpose of this study was to investigate the interfering effects of hydrochloric acid, sulfuric acid, sodium chloride and sodium sulfate on measuring the calcium in the aqueous leaching solutions using the EDTA titration method. The calcium standard solutions were prepared using CaCl₂ with initial pH from −0.8 to 7 and calcium concentration up to 160 mg/l. Sulfuric acid and hydrochloric acid were used to prepare calcium solutions with lower pH. Salt solutions with 3% NaCl and 3% Na₂SO₄ were used to evaluate the interfering effects of salt elements such as sulfate and sodium on the EDTA titration. Results indicated that the EDTA titration method was reliable in measuring the calcium up to 160 mg/l, the maximum concentration investigated in this study, in hydrochloric acid with pH higher than zero and 3% sodium chloride solution. Sulfuric acid with pH higher than zero and 3% sodium sulfate solutions showed 3% to 4% less calcium in the solutions. Acid solutions with pH less than zero showed interference with calcium measurement.     

Oxidative flavour deterioration of fish oil enriched milk

The oxidative deterioration of milk emulsions supplemented with 1.5 wt‐% fish oil was investigated by sensory evaluation and by determining the peroxide value and volatile oxidation products after cold storage. Two types of milk emulsions were produced, one with a highly unsaturated tuna oil (38 wt‐% of n‐3 fatty acids) and one with cod liver oil (26 wt‐% of n‐3 fatty acids). The effect of added calcium disodium ethylenediaminetetraacetate (EDTA) on oxidation was also investigated. Emulsions based on cod liver oil with a slightly elevated peroxide value (1.5 meq/kg) oxidised significantly faster than the tuna oil emulsions, having a lower initial peroxide value (0.1 meq/kg). In the tuna oil emulsions the fishy off‐flavour could not be detected throughout the storage period. Addition of 5—50 ppm EDTA significantly reduced the development of volatile oxidation products in the cod liver oil emulsions, indicating that metal chelation with EDTA could inhibit the decomposition of lipid hydroperoxides in these emulsions. This study showed that an oxidatively stable milk emulsion containing highly polyunsaturated tuna fish oil could be prepared without significant fishy off‐flavour development upon storage, provided that the initial peroxide value was sufficiently low.     

EDTA滴定法精确测定可溶性氯化物中氯含量

介绍了利用EDTA滴定法精确测定可溶性氯化物中氯含量的原理、条件和方法。试样溶解后,先在强酸性介质中用AgNO3沉淀Cl-离子,沉淀过滤后,加入过量Ni(CN)42-发生置换反应,然后在pH9.5的氨性缓冲溶液中,以紫脲酸铵为指示剂,用EDTA标准溶液滴定置换出的Ni2 离子。结果表明,改进后的本法,准确、干扰小、终点现象明显,是一种准确的测氯方法。测定结果的变异系数仅为0.18%,回收率为98.3%～100.9%。     

超临界直流锅炉的EDTA化学清洗

结合超临界直流锅炉特点及国内常规的几种锅炉化学清洗方案进行分析,同时结合自己负责清洗的几台该类型锅炉化学清洗经验,提出采用EDTA钠盐利用高压加热器进行加热清洗该类型机组是比较理想的方案.