皱纹盘鲍中国群体和日本群体的自交与杂交F1 的RAPD 标记

利用皱纹盘鲍中国群体和日本群体野生个体的单自交和单正反杂交获得了 4个F1家系 ,其中家系AJC、BCC、CCJ、DJJ分别为日本♀×中国♂、中国♀×中国♂、中国♀×日本♂和日本♀×日本♂组合 ,采用 2 2个引物对上述四个家系及其各自亲本个体的遗传结构进行了RAPD分析。结果表明 ,四个家系的平均杂合度 :AJC为 0 .2 32 9,BCC为 0 .1 667,CCJ为 0 .1 773,DJJ为 0 .1 649;各家系两亲本间遗传距离 :AJC为 0 .2 4 62 ,BCC为 0 .1 70 1 ,CCJ为 0 .2 1 0 9,DJJ为 0 .1 688。各家系子代群体与父母本的遗传距离 :AJC为 0 .1 772和 0 .2 2 2 4 ,BCC为 0 .1 1 81和 0 .1 92 0 ,CCJ为0 .1 1 2 3和 0 .1 691 ,DJJ为 0 .0 694和 0 .1 947。各家系子代个体间的遗传距离AJC为 0 .0 976,BCC为0 .0 95 1 ,CCJ为 0 .0 699,DJJ为 0 .0 682 ,而子代各群体间遗传距离均小于 0 .0 2 2 0。     

裙带菜配子体基因工程选择标记的研究

研究了裙带菜(Undaria pinnatifida)配子体对除草剂草丁膦的敏感性以及温度对草丁膦处理效果的影响。结果表明,裙带菜配子体对草丁膦敏感;统计学分析得出了草丁膦在不同温度条件下处理裙带菜配子体的半致死浓度(LD50)及95%可信限;温差达到10℃时,相同处理时间各组内不同处理温度样品的LD50之间呈现显著差异,第6天的LD50由10℃组的15.78 mg/L降为20℃组的11.56 mg/L和25℃组的10.33 mg/L。研究发现可以尝试采用草丁膦作为裙带菜配子体遗传转化的选择试剂。     

Application of the first internal transcribed spacer(ITS-1) of ribosomal DNA as a molecular marker to population analysis in farrer''s scallop Chlamys farreri

Sequence variation of the first internal transcribed spacer of ribosomal DNA （ ITS - 1 ） was examined and its application to the study of genetic variation was explored in four populations of farter＇ s scallop Chlamys farreri. ITS - 1 fragments, with a length of about 300 bp,of 78 individuals collected from Dalian, Qingdao, Yantai in China and Korea respectively were amplified via PCR, cloned and sequenced. Intra-genomic variation was examined by sequencing several clones of single individuals. Alignment and polymorphism analysis detected 44 haplotypes and 50 polymorphic sites which consist of 30 substitutions and 20 indels, indicating a high level of polymorphisms. Sequence analysis also showed a very low level of intra-individual variation. All these features validated the feasibility of application of ITS - 1 fragment to population analysis. Polymorphism analysis showed that the Korea sample has the richest genetic variation, followed by Yantai and Qingdao samples. AMOVA （analysis of molecular variance） showed that the majority （96.26%） of genetic variation was distributed within populations and 3.74% resulted from among populations, but with P 〈 0.05 （ = 0.042）, indicating that the populations in this study have significant divergence. This output was basically concordant with the result arising from RAPD data and different from that from mitochondrial 16S rDNA sequence data. Discussion on this inconsistency was made accordingly.     

基于MAPGIS的军事标图系统的设计

军事领域是一个非常特殊的行业，信息的安全性和空间数据的多样性是应用开发的重要问题。在全球信息化日趋高速发展和逐步成熟的今天，军队信息化建设也必须与GIS技术紧密结合，跟上时代前进的步伐。较系统地研究了GIS技术在军事标图绘制中的应用和集成问题，并提供了相应的理论方法和实现系统。在此基础上介绍了以MAPGIS为开发平台的军事标绘系统的实用功能和特点。首先分析了军事信息系统对地理信息数据的要求，并且评述了相关领域的研究现状。然后较为系统地介绍了军事标图系统的总体设计，根据军事标绘对象的数据特征，设计符合要求的应用系统提出了面向对象和无缝交互工具等的设计思想。对军标对象数据模型和操作模型进行了详细地阐述和说明，并将这些模型在系统中进行了实现。最后介绍了军事标图系统的主要模块和功能，探讨了今后GIS研究和发展的方向。     

流体成矿系统与成矿作用研究

对几乎所有金属矿床类型来说，其形成过程均与金属从源岩的活化、原始渗滤、矿质运移和金属沉淀富集成矿关系密切，这些过程主要是由流体的运动和作用完成的。因此，识别金属和流体的来源，追溯流体从源区将金属运载至最终成矿部位所经过的路径，以及查明金属和流体沿运移通道发生的物理、化学和时间上的各种变化及其特殊性质，可以为矿床评价与勘查提供很有价值的定量成矿信息。成矿流体的来源－运移－沉淀（－堆积）过程会以流体成矿系统的形式保留下来。对流体成矿系统和作用的全面了解可通过调查活动的和古代的两种系统获得。活动流体成矿系统是目前正在进行原始矿质搬运的系统，调查这些系统可对运移通道中的含矿流体进行取样和监测研究。古流体成矿系统包括各时代从含金石英脉到铅－锌矿脉系统的所有热液脉型矿床以及沉积喷气型和所谓层控矿床。对含矿矿物和岩石的广泛岩石学、化学、流体包裹体和同位素研究将为定量评价与预测矿床的分布和变化提供至关重要的资料。流体成矿系统内具有一些重要特征，如各种地质要素的方向性、相关性和指示性变化。     

多相地貌单元场地勘察中基岩与卵砾石、孤石的鉴别

在多相地貌单元场地勘察中，基岩与卵砾石的鉴别难度较大。应利用初步感性认识、钻进状态、岩样特征等多手段对基岩与卵砾石进行判别，以提高判别率。     

煤田资料的铀矿二次开发技术及其找矿意义——以二连盆地ZS煤田铀矿点的发现为例

在中国北方主要盆地铀矿地质调查工作中,煤田自然伽马异常作为主要矿化信息和找矿线索,为一系列铀矿床(点)的快速发现奠定了坚实基础。为进一步提高煤田资料铀矿二次开发的高效性和准确性,运用水成铀矿理论,以中国二连盆地ZS煤矿区典型铀矿点的发现为例,初步探讨了煤田资料的铀矿二次开发技术,提出了"异常筛选与选区分析、原位验证与环境判别、等时地层格架建立与沉积体系分析、综合分析与靶区定位"四位一体的煤矿区铀矿地质调查模式。这对中国北方含煤盆地铀矿地质调查工作提供了新的找矿思路和技术路线,具有较重要的指导意义。     

Deformation patterns of upper Quaternary strata and their relation to active tectonics,Po Basin,Italy

Despite increased application of subsurface datasets below the limits of seismic resolution, reconstructing near‐surface deformation of shallow key stratigraphic markers beneath modern alluvial and coastal plains through sediment core analysis has received little attention. Highly resolved stratigraphy of Upper Pleistocene to Holocene (Marine Isotope Stage 5e to Marine Isotope Stage 1) alluvial, deltaic and coastal depositional systems across the southern Po Plain, down to 150 m depth, provides an unambiguous documentation on the deformation of previously flat‐lying strata that goes back in time beyond the limits of morphological, historical and palaeoseismic records. Five prominent key horizons, accurately selected on the basis of their sedimentological characteristics and typified for their fossil content, were used as highly effective stratigraphic markers (M1 to M5) that can be tracked for tens of kilometres across the basin. A facies‐controlled approach tied to a robust chronology (102 radiocarbon dates) reveals considerable deformation of laterally extensive nearshore (M1), continental (M2 and M3) and lagoon (M4 and M5) marker beds originally deposited in a horizontal position (M1, M4 and M5). The areas where antiformal geometries are best observed are remarkably coincident with the axes of buried ramp anticlines, across which new seismic images reveal substantially warped stratal geometries of Lower Pleistocene strata. The striking spatial coincidence of fold crests with the epicentres of historic and instrumental seismicity suggests that deformation of marker beds M1 to M5 might reflect, in part at least, syntectonically generated relief and, thus, active tectonism. Precise identification and lateral tracing of chronologically constrained stratigraphic markers in the ¹⁴C time window through combined sedimentological and palaeoecological data may delineate late Quaternary subsurface stratigraphic architecture at an unprecedented level of detail, outlining cryptic stratal geometries at the sub‐seismic scale. This approach is highly reproducible in tectonically active Quaternary depositional systems and can help to assess patterns of active deformation in the subsurface of modern alluvial and coastal plains worldwide.     

被动椭圆形标志物应变分析的计算机模拟

本文采用计算机数学模拟的方法更深入地探讨了椭圆形标志物应变分析技术(R_f/Φ去应变法、Shimamoto等提出的代数法、调和平均值法和算术平均值法)的适用条件。一共形成了十一组有代表性的应变前数组,四种变形路径:纯剪、单剪、纯剪加单剪和体变。当应变前数组在(-90°,90°)内均匀分布或随机分布时,无论变形路径是哪一种(共轴的还是非共轴的),上述的所有方法都是适用有,且以代数法最佳。当应变前数组具有优选方位(单峰分布)且变形路径为共轴递进变形时,在一定条件下,R_f/Φ法能用来估计应变。经分析发现当应变足够大时,调和平均值法是一种简单快速的应变计算法。     

黄松甸子砾岩型金矿地质特征

对产于新三系底部的黄松甸子砾岩型金矿的矿区地质，含金砾岩，矿床特征，金的赋存状态和富集规律进行了叙述。指出砾岩型金矿的形成受构造运行，矿质来源和古地理环境控制，并提出今后找矿方向。