Crack initiation and propagation in braided SiC/SiC composite tubes: Effect of braiding angle

Crack initiation and propagation in three braided SiC/SiC composite tubes with different braiding angles are investigated by in situ tensile tests with synchrotron micro-computed tomography. Crack networks are precisely detected after an image subtraction procedure based on Digital Volume Correlation. FFT based simulations are performed on the full-resolution 3D images to assess elastic stress/strain fields. Quantitative measurements of the crack geometries are performed using a novel method based on grey levels. The results show that braiding angle has no obvious effect on the location of crack onsets (initiation always occurs at tow interfaces), whereas it significantly affects the paths of crack propagation. This work provides an explicit demonstration of the crack propagation scenarios with respect to the mesoscopic fibre architectures.     

基于ADSP21XXC运行环境下FFT的实现

介绍了数字信号处理器ADSP21XX芯片的特点以及实现FFT(快速离散付里叶变换)的方法，给出了ADSP21XX的C和汇编混合编程的特点及技巧。     

半功率点法估计阻尼的一种改进

为了提高半功率点法估计阻尼的精度，探讨了快速傅立叶变换（FFT）离散谱线之间函数值的意义，基于这种连续性理解，构造了半功率点估计阻尼的新算法，采用理论分析与数值仿真相结合的方法研究了半功率点法的主要误差因素和各自特性，特别是其中窗阻尼变化规律，给出了保证阻尼误差小于10％，5％和1％对窗长的要求。     

抗窄带干扰宽带中频数字接收机的设计与实现

讨论了存在强干扰条件下MSK中频数字接收机的频域窄带干扰抑制、伪码快速捕获、MSK相干解调等实现方法。具体实现中提出了基于功率估计的码捕获门限实时调整方案，解决了动态干扰条件下的快速码捕获问题。基于FPGA DSP硬件设计和软件可编程数字信号处理算法，接收机具有较强的适应性和稳定性。     

基于SHARC数字脉压系统的设计与实现

详细介绍了采用两片浮点DSP ADSP21062实现某舰载雷达所需要完成的舰速补偿、反异步干扰和脉冲压缩的系统研制。通过采用分段匹配滤波的方法，极大地节约了时间和空间。与完成同样功能采用单片TMS320C6701的设计相比，本设计具有外围电路简单、系统调试容易等优点。     

振动传感器的随机校准方法

介绍了采用双通道FFT分析仪进行振动传感器随机校准的方法。校准系统采用2种方法，闭环控制，单振动台全频段校准。经理论分析和试验研究，其校准结果准确可靠。     

Spectral estimation of video signals

Spectrum analyzers are ubiquitous in laboratory work concerning one dimensional signals. This is because linear operators are best examined in the frequency domain. Linear operators, such as linear filters, DCT coders, line shufflers, etc., dominate also the video systems scenario. Their frequency domain study is as appropriate and informative as it is in the case of their one-dimensional counterparts. This paper considers the problems associated with the introduction of two well-known spectral estimation techniques, the periodogram and AR estimates, to the context of television signals. The potential for application of spectral estimation to video problems is exemplified by a number of applications related to the fields of enhanced quality television and HDTV. Special attention is paid to the computational aspects, whose effective solution conditions the practical applicability of the proposed spectral estimation techniques.R. Rinaldo is currently at the Department of Electrical and Computer Engineering of the University of California, Berkeley.     

动态信号分析系统的进展及应用

本文综述了动态信号分析仪器与系统的发展,并综合介绍了双通道动态信号分析仪的构成、性能与指标,以及由动态测量、数据采集、信号处理等硬件与相应软件组成的多通道动态信号分析系统的进展.     

串联谐振耐压试验仪的设计与仿真

针对XLPE电力电缆耐压测试成本高、操作复杂等问题,本文中设计了一种变频串联谐振耐压试验装置。利用串联谐振电路的升压原理,构建了硬件电路,通过仿真对选择谐振点等问题进行了探讨。为了改进普通串联谐振耐压测试装置寻找谐振点慢、精度低的缺点,提出了一种解决方案。仿真结果表明,该方法能精确地确定谐振点。装置输出波形可靠性好,谐波分量少,具有良好的性能。     

涡流阵列传感器半解析模型的直接FFT构建方法

针对分布式激励源涡流阵列传感器半解析模型的构建问题,提出了传感器半解析模型的直接FFT构建方法。该方法首先通过虚拟采样和FFT得到传感器导线界面处线电流密度的傅里叶变换系数,然后根据层状介质空间中场量傅里叶变换系数传递关系,经反FFT得到场量的空间分布。建模过程和数值计算结果表明此方法不仅简化了半解析模型的建立过程,而且直接将激励源导线宽度考虑在建模过程之中,提高了建模精度;建立了该传感器的应用物理模型,数值仿真结果表明该传感器对其周围介质空间的电磁属性较为敏感,可望将该类型的传感器运用于金属结构的在线监测之中。