Helmert方差分量估计在GPS/GLONASS/BDS组合定位权比确定中的应用

因GNSS系统间观测噪声、轨道精度的差异，采用经验权比进行组合定位难以得到最优结果。基于此，在GPS/GLONASS/BDS组合定位中引入Helmert方差分量估计，对GPS/GLONASS/BDS组合单点定位和基线解算中各系统观测值进行合理定权。实验表明，采用该方法确定的伪距观测值最佳权比为5∶1∶1，相位观测值最佳权比为1∶1∶1，有效提高了GPS/GLONASS/BDS组合定位的精度和可靠性。     

重庆地面最高气温与最大风速年极值的渐近分布

利用重庆1951-1990年间地面最高气温和1956-1990年间地面最大风速年极值的记录,采用韦伯分布和耿贝尔分布分别对其渐近分布进行拟合.通过统计推断,找出重庆地面最高气温和地面最大风速年极值遵循的最佳渐近分布--韦伯分布.     

AR（P）参数估计协方差方法与其改进型方法的对比研究

定性分析协方差方法及其改进型在ＡＲ（Ｐ）参数估计中的应用，提供了一种估计参数的计算机上机流程图，比较了协方差方法及其改进型谱估计结果。     

抗差估计的初值选择

对L1 范估计的平差值和LS估计的平差值作为抗差估计的初值进行了比较 ,指出在 ρ函数是严凸函数时 ,二者无明显的区别。因为LS估计简单且易于计算 ,因此建议用LS估计的平差值作为抗差估计的初值。     

STUDY ON GIS FOR YIELD ESTIMATION BY REMOTE SENSING IN JILIN MAIZE BELT

ＳＴＵＤＹ　ＯＮ　ＧＩＳ　ＦＯＲ　ＹＩＥＬＤ　ＥＳＴＩＭＡＴＩＯＮ　ＢＹ　ＲＥＭＯＴＥ　ＳＥＮＳＩＮＧ　ＩＮ　ＪＩＬＩＮ　ＭＡＩＺＥ　ＢＥＬＴＳＴＵＤＹＯＮＧＩＳＦＯＲＹＩＥＬＤＥＳＴＩＭＡＴＩＯＮＢＹＲＥＭＯＴＥＳＥＮＳＩＮＧＩＮＪＩＬＩＮＭＡＩＺ...     

REMOTE SENSING FOREST BIOMASS: AN EVALUATION USING HIGH RESOLUTION REMOTE SENSOR DATA AND LOBLOLLY PINE PLOTS

Eight-year-old Loblolly pine (Pinus taeda) plots located in South Carolina were evaluated using high resolution aircraft multispectral scanner data to determine if biomass could be accurately measured. Sixteen pine plots located on both sandy and clay soils were treated with 0, 180, or 360 kg. (approximately 0, 400, or 800 lb.) of nitrogen per plot. Indices of biomass from remote sensing data were significantly correlated with in situ biomass measurements made in each plot. A ratio of infrared (.9–1.1 μm) and red (.65–.70 μm) channels yielded the best correlation. The indices were not sensitive to differences in soil type (sandy or clay).     

On least squares estimation of generalized covariance functions

Least squares estimation (LSE) is theoretically related to quadratic unbiased estimation of variance components. It is argued that these methods of estimation of variance components essentially generalize LSE though they are not formally equivalent.     

变形分析的Bayes估计与检验

由于观测条件的变化，观测值方差将产生随机波动。本文根据Ｂａｙｅｓ估计理论，推导了线性模型待估参数的分布函数及观测值方差估计公式，并将其用于位移检验。计算结果表明，在同样的置信度下，本方法更符合实际。文中还对参数估值的统计性质进行了讨论。     

用遗传算法解算病态方程

对应用遗传算法解决病态方程问题进行了探讨。利用拟合法而不是通过法方程求解参数，从而避免了法方程系数求逆，使病态方程的解答有了较好的结果。通过模拟计算并和其他方法进行比较，证明该方法是可行的和有效的。     

Combined mine tremors source location and error evaluation in the Lubin Copper Mine (Poland)

A modified method of mine tremors location used in Lubin Copper Mine is presented in the paper. In mines where an intensive exploration is carried out a high accuracy source location technique is usually required. The effect of the flatness of the geophones array, complex geological structure of the rock mass and intense exploitation make the location results ambiguous in such mines. In the present paper an effective method of source location and location's error evaluations are presented, combining data from two different arrays of geophones. The first consists of uniaxial geophones spaced in the whole mine area. The second is installed in one of the mining panels and consists of triaxial geophones. The usage of the data obtained from triaxial geophones allows to increase the hypocenter vertical coordinate precision. The presented two-step location procedure combines standard location methods: P-waves directions and P-waves arrival times. Using computer simulations the efficiency of the created algorithm was tested. The designed algorithm is fully non-linear and was tested on the multilayered rock mass model of the Lubin Copper Mine, showing a computational better efficiency than the traditional P-wave arrival times location algorithm. In this paper we present the complete procedure that effectively solves the non-linear location problems, i.e. the mine tremor location and measurement of the error propagation.