In vitro penetration of bleaching agents into the pulp chamber

AIM: To investigate pulp chamber penetration of bleaching agents in teeth following restorative procedures. METHODOLOGY: Bovine lateral incisors were sectioned 3 mm apical to the cemento-enamel junction and the coronal pulpal tissue was removed. Teeth were divided into six groups (n = 10): G1, G2 and G3 were not submitted to any restorative procedure, while G4, G5 and G6 were submitted to Class V preparations and restored with composite resin. Acetate buffer was placed in the pulp chamber and treatment agents were applied for 60 min at 37 degrees C as follows: G1 and G4, immersion into distilled water; G2 and G5, 10% carbamide peroxide (CP) exposure; G3 and G6, 35% CP bleaching. The buffer solution was removed and transferred to a glass tube where leuco crystal violet and horseradish peroxidase were added, producing a blue solution. The optical density of the blue solution was determined spectrophotometrically at 596 nm. A standard curve made with known amounts of hydrogen peroxide was used to convert the optical density values of the coloured samples into microgram equivalents of hydrogen peroxide. Data were submitted to anova and Tukey's test (5%). RESULTS: Amounts of hydrogen peroxide found in the pulp chamber of G2 and G5 specimens (0.1833 +/- 0.2003 micro g) were significantly lower (P = 0.001) when compared to G3 and G6 specimens (0.4604 +/- 0.3981 micro g). Restored teeth held significantly higher (P = 0.001) hydrogen peroxide concentrations in the pulp chamber than intact teeth. CONCLUSION: Higher concentrations of the bleaching agent produced higher levels of hydrogen peroxide in the pulp chamber, especially in restored teeth.     

Evaluation of the bleached human enamel by Scanning Electron Microscopy

Since bleaching has become a popular procedure, the effect of peroxides on dental hard tissues is of great interest in research. Purpose: The aim of this in vitro study was to perform a qualitative analysis of the human enamel after the application of in-office bleaching agents, using Scanning Electron Microscopy (SEM). Materials and Methods: Twenty intact human third molars extracted for orthodontic reasons were randomly divided into four groups (n=5) treated as follows: G1- storage in artificial saliva (control group); G2- four 30-minute applications of 35% carbamide peroxide (total exposure: 2h); G3- four 2-hour exposures to 35% carbamide peroxide (total exposure: 8h); G4- two applications of 35% hydrogen peroxide, which was light-activated with halogen lamp at 700mW/cm2 during 7min and remained in contact with enamel for 20min (total exposure: 40min). All bleaching treatments adopted in this study followed the application protocols advised by manufacturers. Evaluation of groups submitted to 35% carbamide peroxide was carried out after two time intervals (30 minutes and 2 hours per session), following the extreme situations recommended by the manufacturer. Specimens were prepared for SEM analysis performing gold sputter coating under vacuum and were examined using 15kV at 500x and 2000x magnification. Results: Morphological alterations on the enamel surface were similarly detected after bleaching with either 35% carbamide peroxide or 35% hydrogen peroxide. Surface porosities were characteristic of an erosive process that took place on human enamel. Depression areas, including the formation of craters, and exposure of enamel rods could also be detected. Conclusion: Bleaching effects on enamel morphology were randomly distributed throughout enamel surface and various degrees of enamel damage could be noticed. Clinical significance: In-office bleaching materials may adversely affect enamel morphology and therefore should be used with caution.     

Influence of thermal gradients on stress state of veneered restorations

Objectives

To assess transient and residual stresses within the porcelain of veneered restorations (zirconia and metal) as a result of cooling rate and porcelain thickness.

Methods

Porcelain-on-zirconia (PZ) and porcelain-fused-to-metal (PFM) crowns were fabricated with 1 or 2 mm of porcelain. Thermocouples were attached both internally and externally to the crowns to record transient temperatures. For fast cooling, the furnace was opened after the holding time and switched off. Slow cooling was accomplished by opening the furnace at 50 °C below the glass transition temperature (T_g) of the material. An axially symmetric FEA model simulated thermal stresses. Time-dependent temperature equations from thermocouple readings were set as boundary conditions. Framework materials and the porcelain below T_g were considered to behave elastically. Visco-elastic behavior was assumed for porcelain above the T_g modeling properties as dependent on cooling rate.

Results

Differences in residual stress were found for fast and slow cooled PZ and PFM crowns. Significant transient stress waves were observed within the porcelain when fast cooling through T_g. They are believed to be related to non-uniform volumetric changes originated from thermal gradients. Results were confirmed by modeling and physical testing of crowns containing a defect.

Significance

Residual stresses do not distinguish PZ from PFM. High magnitude transient stresses observed within the porcelain during fast cooling may explain clinical fractures involving internal defects. Stress waves may also originate internal micro-cracking which could grow under function. Therefore, slow cooling, especially for all-ceramic crowns with thick porcelain, is important to prevent thermal gradients and high-magnitude transient stresses.     

Pediatric transplantation in Europe during the COVID-19 pandemic: Early impact on activity and healthcare

The current pandemic SARS-CoV-2 has required an unusual allocation of resources that can negatively impact chronically ill patients and high-complexity procedures. Across the European Reference Network on Pediatric Transplantation (ERN TransplantChild), we conducted a survey to investigate the impact of the COVID-19 outbreak on pediatric transplant activity and healthcare practices in both solid organ transplantation (SOT) and hematopoietic stem cell transplantation (HSCT). The replies of 30 professionals from 18 centers in Europe were collected. Twelve of 18 centers (67%) showed a reduction in their usual transplant activity. Additionally, outpatient visits have been modified and restricted to selected ones, and the use of telemedicine tools has increased. Additionally, a total of 14 COVID-19 pediatric transplanted patients were identified at the time of the survey, including eight transplant recipients and six candidates for transplantation. Only two moderate-severe cases were reported, both in HSCT setting. These survey results demonstrate the limitations in healthcare resources for pediatric transplantation patients during early stages of this pandemic. COVID-19 disease is a major worldwide challenge for the field of pediatric transplantation, where there will be a need for systematic data collection, encouraging regular discussions to address the long-term consequences for pediatric transplantation candidates, recipients, and their families.     

Plasmapheresis‐resistant acute humoral rejection successfully treated with anti‐C5 antibody

Even if kidney graft survival has improved during the last decades, sensitized pediatric patients are an emerging problem. We describe a 17‐yr‐old male who lost his first graft due to chronic rejection becoming hyperimmunized (CDC PRA 99.61%). A desensitization protocol based on high‐dose IVIG, PP, and two Mabthera^® infusions was performed with minor response (CDC PRA post‐desensitization 80%). One month after his second non‐living transplant, he developed a biopsy‐proven AMR; post‐transplant immunological monitoring showed the presence of donor‐specific anti‐DQ5 antibodies (DSA, MFI 20.000). He received methylprednisolone pulses and 45 PP sessions without clinical response; eculizumab was then used to salvage a kidney undergoing severe PP‐resistant rejection. A biopsy performed after the fourth eculizumab infusion showed complete resolution of AMR. Eculizumab infusions were then continued for the first year post‐transplantation. Two yr after transplantation, graft function is stable. Anti‐C5 therapy may represent an effective therapeutic option in pediatric patients with PP‐resistant AMR.     

Ischemia-reperfusion model in rat spinal cord: cell viability and apoptosis signaling study

This work aimed at determining the ideal ischemia time in an in vitro ischemia-reperfusion model of spinal cord injury. Rat spinal cord slices were prepared and then exposed or not to oxygen deprivation and low glucose (ODLG) for 30, 45, 60, 75 and 90 minutes. Cell viability was assessed by triphenyltetrazolium (TTC), lactate dehydrogenase (LDH) release, and fluorochrome dyes specific for cell dead (ethidium homodimer) using the apotome system. Glutamate release was enzymatically measured by a fluorescent method. Gene expression of apoptotic factors was assessed by real time RT-PCR. Whereas spinal cord slices exposed to ODLG exhibited mild increase in fluorescence for 30 minutes after the insult, the 45, 60, 75 and 90 minutes caused a 2-fold increase. ODLG exposure for 45, 60, 75 or 90 minutes, glutamate and LDH release were significantly elevated. nNOS mRNA expression was overexpressed for 45 minutes and moderately increased for 60 minutes in ODLG groups. Bax/bcl-xl ratio, caspase 9 and caspase 3 mRNA expressions were significantly increased for 45 minutes of ODLG, but not for 30, 60, 75 and 90 minutes. Results showed that cell viability reduction in the spinal cord was dependent on ischemic time, resulting in glutamate and LDH release. ODLG for 45 minutes was adequate for gene expression evaluation of proteins and proteases involved in apoptosis pathways.