High-performance nonfused ring electron acceptor with a steric hindrance induced planar molecular backbone

Three nonfused ring electron acceptors (NFREAs) TTC6,TT-C8T and TT-TC8 were purposefully designed and synthesized.The molecular geometry can be adjusted by the steric hindrance of lateral substituents.According to the DFT calculations,from TTC6 to TT-C8T and TT-TC8,planarity of the molecular backbone is gradually improved,accompanying with the enhancing of intramolecular charge transfer effect.As for TT-TC8,the two phenyl substituents are almost perpendicular to the molecular backbone,which endues the acceptor with good solubility and suppresses it to form over-aggregation.Multidirectional regular molecular orientation and closer molecular stacking are formed in TT-TC8 film.As a result,TT-TC8 based devices afford the highest PCE of 13.13%,which is much higher than that of TTC6 (4.41%) and TT-C8T (10.42%) and among the highest PCE values based on NFREAs.     

Convergence of the viscosity solution of non-autonomous Hamilton-Jacobi equations

In this paper,we investigate the non-autonomous Hamilton-Jacobi equation ■ where H is 1-periodic with respect to t and M is a compact Riemannian manifold without boundary.We obtain the viscosity solution denoted by T_(t_0)~tφ(x) and show T_(t_0)~tφ(x) converges uniformly to a time-periodic viscosity solution u~*(x,t) of ?_tu+H(t,x,?_xu,u)=0.     

北京谱仪Ⅲ电磁量能器触发系统的模拟研究

利用北京谱仪Ⅲ探测器模拟和触发系统模拟程序,研究了北京谱仪Ⅲ电磁量能器的触发方案.根据物理目标设计了中性事例触发,巴巴事例判选和带电事例触发的方案,优化了各触发条件的参数,并仔细研究了对本底的排斥能力.研究了一批典型的物理道,给出了它们的触发效率,同时给出了预期的本底触发事例率.     

PSF/TiO2杂化超滤膜形成过程的热力学和动力学研究

采用溶胶-凝胶法制备了不同纳米TiO₂含量的聚砜(PSF)/TiO₂杂化超滤膜, 研究了TiO₂浓度对聚砜铸膜液流变学及热力学性质的影响, 构建了计算成膜过程中表观扩散系数(D_a)的新方法, 求出不同TiO₂浓度及温度下的D_a值, 进而剖析了铸膜液流变学和热力学性质的变化对成膜动力学的影响. 并通过扫描电镜观察、杂化膜孔隙率和超滤性能的测试考察了表观扩散系数与膜结构和性能的关系. 结果表明, 加入TiO₂溶胶的PSF铸膜液由牛顿流体转变为非牛顿流体, 其粘度随TiO₂浓度增大而增大. TiO₂的加入减小了铸膜液对非溶剂的容纳能力, 加速铸膜液的液-液相分离, 同时TiO₂引起的热力学促进作用和流变学阻碍作用相互竞争, 共同影响D_a的变化. 实验得出, D_a随温度升高而增大, 随TiO₂浓度的增大有先增大后减小的趋势. 表观扩散系数D_a与膜的结构和性能具有很好的相关性并能直观地描述整个成膜过程.     

Ship-in-bottle formation of Ru_3(CO)_(12) in NaY zeolite

NaY zeolite entrapped Ru3(CO)12 cluster has been synthesized from RuCl3 ion-exchanged NaY, which is well characterized by IR and Raman spectroscopies and CO chemisorp-tion. When the Ru3+/NaY sample is heated from 298 K to 393 K for 25 h and for 10 h at 393 K, the sample colour changes from dark to brown-yellow. The in situ infrared spectrum exhibits absorption bands at 2130, 2064, 2040, 2017, 1990, 1953 and 1925 cm-1. The bands at 2130 cm-1 arises from the Runm+(CO)l m =1-3;n = 1 - 3; l = 1-12). The bands at 2064, 2040, 2017 and 1990 cm-1 are proposed to be associated with the Ru3(CO)12/NaY, which are close to Ru3(CO)12 crystalline. Furthermore, the Raman results provide bands at 150 and 185 cm-1, which can be attributed to Ru-Ru bonds of the sample as in the case of Ru3(CO)12 crystalline, for which the A1' Ru-Ru stretching mode is assigned to 185 cm-1 and E1' Ru-Ru stretching mode is assigned to a band at 150 cm-1, respectively. CO chemisorption of [Ru3]/NaY gives a CO/Ru ratio of 3.85, which is simila     

Redox-Guest-Induced Multimode Photoluminescence Switch for Sequential Logic Gates in a Photoactive Coordination Cage

Molecular or supramolecular level photoluminescence (PL) modulation combining chemical and photonic input/output signals together in an integrated system can provide potential high-density data memorizing and process functions intended for miniaturized devices and machines. Herein, a PL-responsive supramolecular coordination cage has been demonstrated for complex interactions with redox-active guests. PL signals of the cage can be switched and modulated by adding or retracting Fc derivatives or converting TTF into different oxidation states through chemical or photochemical pathways. As a result, reversible or stepwise PL responses are displayed by these host–guest systems because of the occurrence of photoinduced electron-transfer (PET) or fluorescence resonance energy transfer (FREnT) processes, providing unique nanodevice models bearing off/on logic gates or memristor-like sequential memory and Boolean operation functions.     

大环镍(Ⅱ)配合物与扁桃酸的手性识别

外消旋大环镍(Ⅱ)配合物[Ni (rac-L)](ClO₄)₂分别与l-和d-扁桃酸阴离子在乙腈/水溶液中反应,通过手性识别得到六配位的[Ni (_RR-L)(S-Man)]ClO₄(1)和[Ni (SS-L)(R-Man)]ClO₄(2)对映异构体(L=5,5,7,12,12,14-六甲基-1,4,8,11-四氮杂环十四烷,Man=扁桃酸)。当[Ni (rac-L)](ClO₄)₂与dl-扁桃酸阴离子反应时得到一对对映体等量存在的共聚物,其中大环配体中RR和SS构型分别优先与l-和d-Man^- 配位形成外消旋混合物,反应过程中发生了手性识别现象,每颗晶体均为手性对映体。当[Ni (rac-L)](ClO₄)₂分别与结构类似的dl-2-苯基丙酸和dl-托品酸阴离子反应时,分别得到化合物[Ni (rac-L)(dl-PPA)]ClO₄(3)(PPA=2-苯基丙酸)和[Ni (rac-L)(dl-Tro)]ClO₄(4)(Tro=托品酸)。X射线单晶衍射结果表明,4个配合物中Ni (Ⅱ)离子均与折叠大环配体L的4个氮原子和2个来自羧基与羟基的氧原子(1和2),或羧基氧原子(3和4)顺式配位,形成六配位八面体构型。配合物1和2属于一对对映异构体,分别通过[Ni (_RR-L)(S-Man)]⁺和[Ni (SS-L)(R-Man)]⁺分子间氢键作用形成一维之字形链状结构。配合物1和2的单手性特征与圆二色(CD)谱测定结果一致。     

两个由5-硝基间苯二甲酸和双咪唑基配体构筑的锰、钴配合物的合成及晶体结构

通过水热法合成了2个新的配合物[Mn(NIPH)(mbix)]_n (1)和[Co(NIPH)(mbix)(H₂O)₃]_2n·2nH₂O (2)(H₂NIPH=5-硝基间苯二甲酸,mbix=1,3-双(咪唑基-1-基)苯)。并对其进行了元素分析、红外光谱、紫外光谱、热重和X-射线单晶衍射测定。这两个配合物通过氢键和π-π相互作用形成了三维超分子网状结构。     

镍、钴超分子配合物的合成、晶体结构及理论计算

通过水热法合成了2个新的金属-有机超分子配合物[Ni(eoba)(phen)(H₂O)₂]·0.58H₂O(1)和[Co(eoba)(phen)]₂·H₂O(2)(H₂boba=4,4''-(乙烷-1,2-二氧基)-二苯甲酸,phen=菲咯啉),并对其进行了元素分析、红外光谱、热重和X射线单晶衍射测定。配合物1和2是同构的,每个配合物都是六配位的,菲咯啉分子上的2个氮原子、4,4''-(乙烷-1,2-二氧基)-二苯甲酸配体上的2个氧原子和2个配位水分子与金属配位。此外,还用高斯03程序PBE0/LANL2DZ方法对配合物1进行了自然键轨道(NBO)分析,计算结果表明配位原子与Ni原子之间存在着共价作用。     

6, 6’-二硫二烟酸构筑的锌配位聚合物的合成、晶体结构和荧光性能

本文以6,6′-二硫二烟酸为主配体,通过水热法合成了新的配合物{[Zn(cpds)(dpa)]·H2O}n(1)(H2cpds=6,6′-dithiodinicotinic acid,dpa=dipyridin-2-ylamine)。用X-射线单晶衍射分析确定了配合物为三斜晶系,P1空间群,其晶体学参数为a=0.846 7(2),b=1.167 4(3),c=1.226 5(3)nm,α=73.605(3)°,β=78.656(3)°,γ=81.484(3)°,V=1.134 7(5)nm3,Dc=1.850 g·cm-3,Z=2。结构分析表明配合物1为一维链状结构,相邻一维链之间堆积形成三维超分子网络结构。本文还研究了配合物的热稳定性和荧光性质。