Superior Low-Temperature Reversible Adhesion Based on Bio-Inspired Microfibrillar Adhesives Fabricated by Phenyl Containing Polydimethylsiloxane Elastomers

Gecko-inspired microfibrillar adhesives have achieved great progress in microstructure design and adhesion improvement over the past two decades. Space applications nowadays show great interest in this material for the characteristics of reversible adhesion and universal van der Waals interactions. However, the impact of harsh environment of space on the performance of microfibrillar adhesives, especially the extreme low temperature, is rarely addressed. Herein, microfibrillar adhesives fabricated by phenyl containing polydimethylsiloxane (p-PDMS) elastomers with superior low-temperature reversible adhesion is proposed. p-PDMS elastomers are synthesized through one-pot anionic ring-opening copolymerization, and the resulting elastomers become non-crystallizable with excellent low-temperature elasticity. Low-temperature adhesion tests demonstrate that the adhesion strength of microfibrillar adhesives fabricated by p-PDMS elastomers can be well maintained to as low as −120 °C. In contrast, the adhesion strength of pure PDMS microfibrillar adhesive reduces more than 50% below its crystallization temperature. The low-temperature cyclic adhesion tests further demonstrate that p-PDMS microfibrillar adhesives exhibit superior reversible adhesion compared to that of PDMS microfibrillar adhesives, owing to the sustainable conformal contact and even distribution of loads over repeated cycles. This study provides a new fabrication strategy for microfibrillar adhesives, and is beneficial for the practical application of microfibrillar adhesives.     

Fabrication and upconversion luminescence properties of Er:SrF2 transparent ceramics compared with Er:CaF2

SrF₂ transparent ceramic is a promising upconversion material due to the low phonon energy. The effect of different sintering temperatures on Er:SrF₂ transparent ceramics was investigated. The suitable sintering temperature for Er:SrF₂ transparent ceramics was 900 °C by hot-pressed sintering in this study. High quality of Er:SrF₂ transparent ceramics with different doping concentrations were obtained. The upconversion luminescence spectra and decay behavior were compared between Er:SrF₂ and Er:CaF₂ transparent ceramics with different Er³⁺ doping concentration. The green emission of 5 at.% Er:SrF₂ ceramic was much stronger than that of 5 at.% Er:CaF₂ ceramic, while the red emission of Er:SrF₂ ceramic was almost the same as that of Er:CaF₂ ceramic. The upconversion luminescence lifetime of Er:SrF₂ transparent ceramics was longer than that of Er:CaF₂.All the results indicated Er:SrF₂ transparent ceramics was a candidate for green fluorescent upconversion materials.     

利用人外周血淋巴细胞染色体畸变估算离体模拟局部照射剂量

多数电离辐射事故均为局部照射。对于局部照射剂量估算,国际原子能机构(IAEA)推荐采用Dolphin's 模型,该模型需推算出照射部位染色体畸变率,再代入离体均匀照射情况下建立的剂量效应曲线来估算局部照射剂量。准确推算照射部位染色体畸变率对于估算剂量十分重要,选用合适的剂量效应曲线对估算剂量也同样重要,而对于局部照射,关于不同剂量率剂量效应曲线对估算结果影响的报道还十分有限。基于此本研究利用人外周血淋巴细胞染色体畸变估算离体模拟局部照射剂量,分析不同剂量率剂量效应曲线对估算结果的影响。利用⁶⁰Co γ射线离体照射人外周血样品(样本A和样本B),剂量分别为1 Gy和5 Gy。将照射血与未照射血按25%和75%比例混合以模拟局部照射,分析混合血样中淋巴细胞的双着丝粒染色体(dicentric chromosome,dic)加着丝粒环(r),利用Dolphin's模型估算局部照射dic+r率,并用剂量率不同的两种剂量效应曲线估算局部照射剂量。结果显示,大部分混合血样dic+r分布不符合泊松分布,为过离散分布。利用与实际照射剂量率一致的剂量效应曲线估算的样品受照剂量大多与实际照射剂量比较接近,相对偏差在10%以内,但两样本的1 Gy 25%组的估算受照剂量与实际照射剂量偏差较大。利用与实际照射剂量率不一致的剂量效应曲线估算的样品受照剂量与实际照射剂量相对偏差均超过10%。结果表明dic+r分析用于估算离体模拟局部照射的剂量有可行性,采用剂量率和照射剂量率一致的剂量效应曲线估算的结果更为准确。     

Life cycle cost of conventional,battery electric,and fuel cell electric vehicles considering traffic and environmental policies in China

Electric vehicles (EVs) are considered a promising alternative to conventional vehicles (CVs) to alleviate the oil crisis and reduce urban air pollution and carbon emissions. Consumers usually focus on the tangible cost when choosing an EV or CV but overlook the time cost for restricting purchase or driving and the environmental cost from gas emissions, falling to have a comprehensive understanding of the economic competitiveness of CVs and EVs. In this study, a life cycle cost model for vehicles is conducted to express traffic and environmental policies in monetary terms, which are called intangible cost and external cost, respectively. Battery electric vehicles (BEVs), fuel cell electric vehicles (FCEVs), and CVs are compared in four first-tier, four new first-tier, and 4 s-tier and below cities in China. The comparison shows that BEVs and FCEVs in most cities are incomparable with CVs in terms of tangible cost. However, the prominent traffic and environmental policies in first-tier cities, especially in Beijing and Shanghai, greatly increase the intangible and external costs of CVs, making consumers more inclined to purchase BEVs and FCEVs. The main policy benefits of BEVs and FCEVs come from three aspects: government subsidies, purchase and driving restrictions, and environmental taxes. With the predictable reduction in government subsidies, traffic and environmental policies present important factors influencing the competitiveness of BEVs and FCEVs. In first-tier cities, BEVs and FCEVs already have a competitive foundation for large-scale promotion. In new first-tier and second-tier and below cities, stricter traffic and environmental policies need to be formulated to offset the negative impact of the reduction in government subsidies on the competitiveness of BEVs and FCEVs. Additionally, a sensitivity analysis reveals that increasing the mileage and reducing fuel prices can significantly improve the competitiveness of BEVs and FCEVs, respectively.     

The effect of Nd3+ concentration on fabrication,microstructure, and luminescent properties of anisotropic S-FAP ceramics

Nd³⁺ doped strontium fluorophosphate (S-FAP), with chemical formula Sr₅(PO₄)₃F, nanopowders were prepared using the co-precipitation method. The prepared powders had no impurity phase with a grain size of about 30 nm and the doping limit of Nd³⁺ ions in strontium fluorophosphate is about 9 at.%. The morphology and particle size were determined by the doping concentration of Nd³⁺. Anisotropic Nd: S-FAP transparent ceramics with different Nd³⁺ doping concentrations were fabricated successfully by the simple hot-pressing method. The grain size of prepared S-FAP transparent ceramics decreased first and then increased with the increase of Nd³⁺ concentration. The 2 at.% Nd: S-FAP ceramic presented the highest optical transmittance at all wavelengths range. The characteristic transitions from the ground state to the excited states of Nd³⁺ ions were observed from the absorption spectra, and the absorption cross-section was calculated at 3.71 × 10^–20 cm². The influence of Nd³⁺ ion concentration on luminescence intensity and fluorescence lifetime was studied under 796 nm excitation. The strong emission of ⁴F_3/2→⁴I_9/2 transition in Nd: S-FAP was calculated by Judd–Ofelt (J-O) theory.     

发挥设备专业化优势探索项目建设设备综合管理标准化工作

设备综合管理工作始终贯穿在项目建设整个过程中.从项目立项审查、基础设计审查、设备订货前的技术把关,到工程施工环节的专业技术检查,再到项目中交、联动试车、投料试车,处处可见设备综合管理的内容.本文梳理出设备综合管理的主要节点内容、现状和存在的问题,针对镇海基地项目群的建设,就如何发挥设备专业化的优势、如何对设备综合管理工作进行创新、如何优化工作流程进行了探索.旨在通过设备综合管理工作的统筹和协调,将专业化优势形成合力,更高质量、更高效率地为项目建设服务.     

Spinel CoFe2O4 /carbon nanotube composites as efficient bifunctional electrocatalysts for oxygen reduction and oxygen evolution reaction

In the development of fuel cells, it is the key to large-scale commercialization of fuel cells to rationally design and synthesize efficient and non-noble metals-based bifunctional electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). In this paper, spinel CoFe₂O₄/carbon nanotube composites (CoFe₂O₄/CNTs/FA) were synthesized by solvothermal and calcination method. XRD, TEM, XPS and BET characterizations indicate that the addition of complexing agent fumaric acid can improve the crystal growth kinetics and morphology of CoFe₂O₄/CNTs nanohybirds. The as-synthesized CoFe₂O₄/CNTs/FA pyrolyzed at 500 °C have an outstanding bifunctional catalytic activity for ORR and OER with the potential of 1.62V (vs. RHE) at a current density of 10 mA/cm² and half-wave potential E_1/2 = 0.808V (vs. RHE) in alkaline electrolyte, respectively. It is obviously better than unloaded CoFe₂O₄ nanoparticles and commercial CNTs. CoFe₂O₄/CNTs/FA also exhibit better methanol tolerance ability and durability than commercial Pt/C and RuO₂ catalyst. This investigation broadens an idea of simple compounding of spinel with carbon-based materials to improve electrochemical properties.     

放射性药物非临床安全性评价的质量保证

本文从五个方面介绍了放射性药物非临床安全性评价质量保证程序,包括放射性实验室管理、人员管理、受试物管理、放射性试验的现场检查和关键阶段检查,确保试验数据的真实准确以及人员与环境的安全。     

空气信息综合管理评估系统

近年来, 重工业的快速发展加剧了空气质量下降, 环境治理变得尤为重要. 然而, 在国内外现有的空气质量评估系统大多形式单一、准确度低、评估范围有限, 并不能较精确的以多样化的形式展示空气质量情况. 本文设计实现了一套集数据收集、标准化处理及空气质量评估为一体的空气质量评估系统. 该系统采用网络爬虫从空气质量监测网站获取数据, 并对数据进行抽取、清洗、单位转化、污染物分类及多种标准化方法处理, 提高空气质量的评估精确度. 系统评估方式多样, 有按时、日、月、监测站位置及污染物种类等, 解决了大多数空气质量评估系统形式单一和评估不准确的问题. 该系统可以为用户提供实时的空气质量情况, 还可以为大气污染相关科研人员提供准确的数据预处理结果. 系统运行稳定可靠, 界面友好, 功能丰富, 能满足空气信息综合管理评估的需求.