Finite element beam propagation method for three-dimensionaloptical waveguide structures

A beam propagation method (BPM) based on the finite element method (FEM) is described for longitudinally varying three-dimensional (3-D) optical waveguides. In order to avoid nonphysical reflections from the computational window edges, the transparent boundary condition is introduced. The present algorithm using the Pade approximation is, to our knowledge, the first wide-angle finite element beam propagation method for 3-D waveguide structures. To show the validity and usefulness of this approach, numerical results are shown for Gaussian-beam excitation of a straight rib waveguide and guided-mode propagation in a Y-branching rib waveguide     

Flashover voltage characteristics of contaminated station insulators under temporary ac overvoltages in the ac system connected with a frequency converter station

According to the recent analysis results of temporary ac overvoltage in the ac system connected with a frequency converter station, large-magnitude over-voltages were confirmed to occur under some special system conditions. Most of the station insulators currently used cannot withstand such overvoltages according to an evaluation based on the data obtained earlier. The necessity of tests to be done to evaluate such performance more accurately was recognized. Both power frequency and switching impulse overvoltage flashover tests were made on contaminated insulators by the method well simulating the natural wetting condition. Switching impulse flashover voltage with the waveshape having a long wavefront time of 2 ms can be well correlated with the flashover voltage characteristics of temporary ac overvoltage. Higher flashover voltage characteristics were obtained by a clean fog test method compared with those obtained by equivalent fog test method.     

A Unified Approach to Submicron DC MOS Transistor Modeling for Low-Voltage ICs

A unified single-equation approach for the MOS transistordrain current modeling for energy-efficient submicron MOS circuitsis presented. Instead of three sets of separate equations forthe triode, saturation, and weak inversion regions, only a continuousexpression which is valid to describe the behavior of drain currentand the derivatives in all operation regions can be realizedby using a combination of hyperbola, sigmoid, and interpolationmethods. The model expression can predict accurate results forthe current, output conductance, and transconductance with continuousand smooth characteristics. The simulation results agree wellwith experimental data.     

Changes in Aging Behavior and Defect Structure of Yttria-Fully-Stabilized ZrO2 with Sc2O3 Doping

Methods of suppressing decreased conductivity in 8 mol% Y₂O₃-stabilized–92 mol% ZrO₂ (8YSZ) with aging were investigated. Different amounts of Sc₂O₃ were doped into 8YSZ. The electrochemical properties of Sc₂O₃-doped 8YSZ were measured, and the microstructural and local structural changes were characterized. The present results indicate that an appropriate amount of Sc₂O₃ doping, 3 or 4 mol%, effectively suppresses decreased conductivity with aging in 8YSZ.     

A new method for power generation planning and problems of uncertainty

This paper presents a new method for power system planning which considers uncertainties of various system parameters as a part of the criterion function. The criterion function involves both the expected values of total system costs and the cost variances of different power plants. Previously, the authors proposed that these cost variances be evaluated from the existing power system plans in the form of the solutions to the inverse optimization problem, and then applied this procedure to the planning of power systems in Japan. However, because of the correlation between fuel and facility costs, the cost variances could not be determined as specific values. Here, to overcome this difficulty, the authors now introduce hydropower plants into the model as the so-called nonrisky elements and focus on the expenditure shares rather than the plant capacity shares. As a result, more reasonable results are obtained. This improved methodology is applied and the derived cost variances are shown. Further, using the resultant cost variances, the authors make Pareto-optimal power generation plans and demonstrate also the robustness of the method to price fluctuations.     

Some experimental findings in compression-after-impact (CAI) tests of CF/PEEK (APC-2) and conventional CF/epoxy flat plates

Compression-after-impact (CAI) tests have been conducted for quasi-isotropic thick plates with 48 plies by using the NASA method and on plates with 32 plies by using the SACMA method. Specimens are made of CF/PEEK (APC-2) and conventional CF/epoxy for the NASA plates and CF/epoxy for the SACMA plates. In the NASA CAI tests, the sequence of delamination buckling and its propagation is clearly revealed through various experimental techniques. One major technique is moiré topography, and the other is thermo-mechanical stress analysis with a high-accuracy infrared sensor. The arrest of delamination propagation just before catastrophic failure due to high fracture toughness is clearly captured by the moiré camera. This behavior provides good CAI values of CF/PEEK. The initial buckling properties of the delaminated region by the impact are then extensively discussed. Numerical predictions of initial buckling stress have been obtained by modelled geometry of the delaminated region simplified from its precise structure clarified by ultrasonic C-scanning. They agree fairly well with the experimental results. The in-plane stress distribution in the delaminated region before initial buckling is measured by an infrared stress graphic system. This compared favorably with finite element predictions. Two types of symmetric buckling modes with respect to the central plate surface, twin and single peak ones, are experimentally captured.     

NiCoFe/C cathode electrocatalysts for direct ethanol fuel cells

A direct ethanol fuel cell (DEFC), which is less prone to ethanol crossover, is reported. The cell consists of PtRu/C catalyst as the anode, Nafion^® 117 membrane, and Ni–Co–Fe (NCF) composite catalyst as the cathode. The NCF catalyst was synthesized by mixing Ni, Co, and Fe complexes into a polymer matrix (melamine-formaldehyde resins), followed by heating the mixture at 800 °C under inert atmosphere. TEM and EDX experiments suggest that the NCF catalyst has alloy structures of Ni, Co and Fe. The catalytic activity of the NCF catalyst for the oxygen reduction reaction (ORR) was compared with that of commercially available Pt/C (CAP) catalyst at different ethanol concentrations. The decrease in open circuit voltage (V_oc) of the DEFC equipped with the NCF catalysts was less than that of CAP catalyst at higher ethanol concentrations. The NCF catalyst was less prone to ethanol oxidation at cathode even when ethanol crossover occurred through the Nafion^®117 film, which prevents voltage drop at the cathode. However, the CAP catalyst did oxidize ethanol at the cathode and caused a decrease in voltage at higher ethanol concentrations.     

2D artificial life system using network-type assembly-like language: influence of change in environment with costs of instructions

To unlock the full potential of evolution in digital media, a Tierra-like system using network-type assembly-like language has been constructed. In the system, like Avida, digital creatures, self-replicating programs, live in a discrete 2D torus space and an interaction between creatures is restricted locally. Bearing a genetic network in mind, network structure is introduced. In the previous works, it is shown that the possibility that the network-type model has more potential of evolution than a linear-type model like Avida in a simple environment. In this paper, to study the potential of evolution more precisely, we model the effects of environment other than creatures. As one of the simplest models of such environment, the cost of execution, i.e. executing time, is introduced. The difficult environment to live in costs high to execute instructions, the easy environment does low. In computer experiments, we have investigated the influence of change in environment by analyzing the process of evolution and diversity of the system. Experimental results show that the network-type system keeps more stable diversity than the linear-type system does, even when the environment changes drastically. This indicates the possibility that the network-type system has more potential of evolution than the linear-type system has. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

A shell for signal interpretation expert systems

System monitoring and diagnosis through signal interpretation are important tasks in many engineering fields. Although monitoring or diagnosis expert systems help human experts a lot, it is not so easy to build a signal interpretation expert system. We have developed two expert systems for speech signal processing. The close analysis of the two systems revealed common functions and modules applicable to wide range of signal interpretation problems. On the basis of the experience, we have developed a shell for signal interpretation expert systems named SSI. In order to evaluate SSI, we also developed two expert systems by using it and obtained satisfactory results. This paper describes the design philosophy and architecture of SSI together with some examples.     

The tricarboxylic acid cycle in Dictyostelium discoideum. Systemic effects of including protein turnover in the current model

The current model for the tricarboxylic acid cycle in Dictyostelium discoideum is based on extensive experimental studies of enzyme kinetics in vitro and of metabolite fluxes measured in vivo. In the previous papers (Shiraishi, F., and Savageau, M. A. (1992) J. Biol. Chem. 267, 22912-22918; 22919-22925; 22926-22933; 22934-22943) of this series we have carried out extensive analyses of the current model within the framework of biochemical systems theory with a view toward understanding the behavior of the integrated system. The model was found to be ill determined with respect to at least three of its features. In this paper we propose a minimal modification in the model that is consistent with previous experimental data but also includes recycling of amino acids for protein synthesis, one of the neglected features identified as important in the previous analysis. We again perform an analysis within the framework of biochemical systems theory to determine the systemic consequences of this change. The results show that the robustness of the modified model, as determined by the parameter sensitivities, is improved by 2 orders of magnitude over that of the previous model. Analysis of the dynamics shows that the turnover times for the pools of alanine, glutamate, and aspartate are reduced by 2 orders of magnitude and made more physiologically realistic. The distribution of flux is no longer rigidly fixed, and problems previously centered on the metabolism of pyruvate have been partially alleviated. Continued discrepancies lead us to question the degree to which kinetic data obtained with purified enzymes in vitro faithfully reflect the kinetic behavior of the integrated enzyme system in vivo. We must continue to re-examine the manner in which the kinetics of reactions in vivo are represented and to reassess the physical conditions that prevail in vitro and in vivo. Results in this paper direct our attention toward specific aspects of the system where these efforts should be focused. Thus, a minimal modification of the previous model has led to several improvements that make it more representative of the tricarboxylic acid cycle in D. discoideum, and the analysis in this paper leads to further predictions for improving the model.