Detection of the Object Velocity Using Doubly-scattered Dynamic Speckles Under Gaussian Beam Illumination

Abstract

The dynamic properties of doubly-scattered speckles produced at the image plane have been investigated using a scattering model that consists of a coherent Gaussian beam, a cascade of two moving diffusers and a single imaging lens. Dependence of the fluctuation speed of time-varying image speckles on the velocities of the diffusers is found to change with the size of illuminating speckles and the width of the point-spread function of the imaging lens. When the point-spread function and the focal position satisfy certain conditions, three kinds of velocity information—the velocity of each diffuser, the average velocity of the diffusers and the velocity difference between the diffusers—can be obtained by measuring a temporal correlation length of the time-varying speckle intensity. Experimental results confirm the theoretical predictions.     

A highly transparent and thermally stable copolymer of 1‐adamantyl methacrylate and styrene

Thermal and optical properties of copolymers of 1‐adamantyl methacrylate (AdMA) and styrene (St) prepared by free radical polymerization in the bulk are investigated. The copolymer forms an azeotrope when the composition is AdMA/St = 55/45 mol%. The glass transition temperature and decomposition temperature of the azeotropic copolymer are 170 and ca 340 °C, respectively. The refractive index increases nonlinearly with St content from 1.522 to 1.591. The light scattering loss at 633 nm is 28.1 dB km^?1, which is less than half of that of polystyrene. The total optical loss including molecular vibrational absorption, which is evaluated using a copolymer‐based optical fiber, is 292–645 dB km^?1 at 500–700 nm. These values correspond to transmittances of 86–93% for a 1 m optical path length. © 2014 Society of Chemical Industry     

Design of AVS/RS under group constraint

Distribution centers, which are essential to our society, are becoming increasingly important. Although the efficiency of an AVS/RS (Autonomous vehicle storage and retrieval system) makes it a promising system, there is still much to be studied regarding its effective use and design. This paper proposes a method of designing AVS/RSs through a quantitative consideration of group constraint by utilizing probability theory. The proposed algorithm also deals with the problem of designing the sizes of several buffers, and considers the effect of load fluctuations, which are important for real-world operation, by use of queuing network theory. Effectiveness of the proposed algorithm is shown with simulations of various number of groups, those of various safety factors for fluctuations, and those of various evasion rates for buffer overflow. The design results are shown to be much different from those which do not consider those factors. The results prove that the proposed method provides an accurate quantitative assessment of the AVS/RS’s constraints.     

Adhesion between polymer surface modified by graft polymerization and tissue during surgery using an ultrasonically activated scalpel device

In the field of surgery, achieving adhesion between a polymer implant and tissue poses a challenge considering that suturing is not appropriate for the stability of such implants. An ultrasonically activated scalpel that generates heat by mechanical vibration and promotes adhesion between a polymer implant and native tissue by pressing the two materials together has very good potential for application in the field. To determine the type of polymer that is suitable for the purpose, we investigated polyethylene (PE) and polystyrene (PS) films, the surfaces of which were activated by corona discharge. Graft polymerization was then performed on the corona‐treated surfaces to vary their properties. The corona‐treated PE and PS films grafted with poly(acrylic acid), poly(methacrylic acid), poly(vinyl benzylacrylic acid), and poly(hydroxylethyl acrylate), respectively, adhered to the tissue when the ultrasonically activated scalpel was applied. The heat generated by the mechanical vibration and the applied pressure enabled the carboxyl or hydroxyl groups to bond with the proteins in the extracellular matrix. We therefore concluded that it was possible to integrate this technique in the development of new types of polymer devices that could be stably implanted in a living body. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40885.     

The effects of infusion of trieicosapentaenoyl-glycerol emulsion on extravascular lung water during myocardial ischemia and reperfusion in dogs

To test the effects of eicosapentaenoic acid (EPA) infusion on pulmonary edema induced by coronary ligation and reperfusion, extravascular lung water (EVLW) was measured in situ by the thermal-dye double indicator dilution method in dogs. In the control group of five dogs, 30 mL of a 10% soybean oil emulsion was infused through a leg vein. One hour after infusion, the left anterior descending coronary artery below the first diagonal branch was ligated for 15 min and then reperfused for 30 min. In the EPA group, six dogs were similarly treated with an emulsion of a 10% trieicosapentaenoyl-glycerol (90% pure). EVLW, pulmonary capillary wedge pressure, mean pulmonary artery pressure, mean blood pressure, and cardiac index were measured before and 15 min after coronary ligation, and 15 min and 30 min after coronary reperfusion. There were no significant differences in the hemodynamic indices between the two groups. EVLW significantly increased up to two times of baseline during coronary ligation in the control group (P< 0.05) and more during reperfusion (P<0.01), whereas EVLW did not increase in the EPA group. In conclusion, EPA inhibited EVLW accumulation and may be useful for ameliorating one of the ischemia-reperfusion-induced complications, pulmonary edema.     

Acrolein formation in the oxidation of ethane over silica catalysts supporting iron and cesium

A significant yield of aldehydes was obtained by the partial oxidation of ethane over alkali‐modified Fe/SiO₂ catalysts at 475°C (<2% in the case of Cs–Fe/SiO₂). Not only acetaldehyde and formaldehyde but also acrolein were produced in the present system. There are no reports regarding the catalysts for the direct acrolein formation from partial oxidation of ethane. Such significant promoting effect of alkali‐modified Fe/SiO₂ catalysts in the partial oxidation of hydrocarbons has never been observed. Aldol‐type condensation for formation of acrolein could occur in the partial oxidation of ethane over alkali‐modified Fe/SiO₂ catalysts. This revised version was published online in July 2006 with corrections to the Cover Date.     

Surface Finishing of Micropins Produced by WEDG

This paper presents a new method of surface finishing for micropin products. Precision micropins thinner than ø100 urn can be produced by WEDG (wire electrodischarge grinding). However, the surface quality of the products is not sufficient for applications that require mirrorlike surface and/or a surface without a heat-affected zone. A succession of two processes, WEDG and lapping, is proposed and tested for its feasibility. In order to ensure the control of the lapping conditions, micropins were WEDGed and lapped on the same machine. The wire electrode for WEDG was used as the lapping tool. A smooth, craterless surface with Ra=18 nm was achieved.     

Hydroliquefaction of low-sulfur coals using iron carbonyl complexes—Sulfur as catalysts

Hydroliquefaction of low-sulfur Australian coals (Wandoan and Yallourn) was studied using iron carbonyl complexes as catalyst. The addition of Fe(CO)₅ (2.8 wt% Fe of coal) increased coal conversion from 48.6 to 85.2% for Wandoan coal, and from 36.7 to 69.7% for Yallourn coal in 1-methylnaphthalene at 425°C under an initial hydrogen pressure of 50 kg cm^?2. When molecular sulfur was added to iron carbonyls (Fe(CO)₅, Fe₂(CO)₉ and Fe₃(CO)₁₂), higher coal converions ( > 92%) and higher oil yields (>46%) were obtained, along with an increase in the amount of hydrogen transferred to coal from the gas phase (0.2 to 2.8%, d.a.f. coal basis). In the liquefaction studies using a hydrogen donor solvent, tetralin, Fe(CO)₅S catalyst increased the amount of hydrogen absorbed from the gaseous phase and decreased the amount of naphthalene dehydrogenated from tetralin. The direct hydrogen transfer reaction from molecular hydrogen to coal fragment radicals seems to be a major reaction pathway. Organic sulfur compounds, dimethyldisulfide and benzothiophene, and inorganic FeS₂ and NiS were found to be good sulfur sources to Fe(CO)₅. From X-ray diffraction analyses of liquefaction residues, it is concluded that Fe(CO)₅ was converted into pyrrhotite (Fe_1?xS) when sulfur was present, but into Fe₃O₄ in the absence of sulfur.