Ammonia production using iron nitride and water as hydrogen source under mild temperature and pressure

Ammonia generation was studied in the reaction between water and nitrogen-containing iron at 323 K and atmospheric pressure. Similar to metallic Fe, the interstitial compound Fe₃N reduced water through Fe oxidation to produce hydrogen gas, while the N combined with atomic hydrogen to produce ammonia as a byproduct. The addition of carbon dioxide to this system accelerated the reaction with concomitant consumption of carbon dioxide. The promoted ammonia production upon addition of carbon dioxide can be attributed to the generation of atomic hydrogen from the redox reaction of carbonic acid and Fe, as well as removal of used Fe from the reaction system through the formation of a soluble carbonato complex. When carbonate was added to the reaction system, the production rates of ammonia and hydrogen increased further. The results here confirmed that ammonia can be synthesized from iron nitride under mild conditions by utilizing carbon dioxide.     

Contribution of metal vapor mass at periphery part of pulsed arc to electromagnetic force in weld pool

The arc welding has been used in various welding methods because it is inexpensive and high in strength after welding. However, it is a problem that accidents such as collapse of the bridge occur because of the welding defects. The welding of low cost and high productivity is required without the welding defects. The pulsed TIG welding is inexpensive and capable of high‐quality welding. The electromagnetic force contributing to penetration changes because the transient response of arc temperature and iron vapor generated from anode occurs. However, the analysis of pulsed TIG welding with metal vapor has been elucidated only metal vapor concentration near anode with transient phenomenon and heat flux. Thus, the theoretical elucidation of penetration depth with control factor has not been researched. In this paper, the contribution of metal vapor mass at the periphery part of pulsed arc to the electromagnetic force in the weld pool is elucidated. As a result, the iron vapor mass at periphery part decreased with increasing the frequency. The iron vapor was stagnated at axial center within one cycle. The electromagnetic force to the penetration depth direction in weld pool increased at axial center. Therefore, the metal vapor mass at periphery part plays an important role for the electromagnetic force increment at axial center.     

Phase diagrams calculated for Fe-rich Fe-Si-Co and Fe-Si-Al ordering alloy systems

Theoretical analysis based on the calculation of phase diagrams was employed for Fe-Si-Co and Fe-Si-Al ordering systems to clarify the necessity for the occurrence of phase separation in Fe-base ternary ordering systems. The free energy of Fe-base ternary ordering alloys where B2 and D0₃ ordered structures are formed is evaluated statistically using a pairwise interaction approximation up to second nearest neighbours, taking into account not only the atomic interaction but also the magnetic interaction, based on the Bragg-Williams-Gorsky model. The calculated phase diagrams are consistent with the experimentally obtained ones. The phase diagram calculation in this work is useful to predict the equilibrium states of the ternary ordering systems. The phase separation in ordering alloys is caused by the contribution of excess free energies due to ordering. The influences of ferromagnetism on the two-phase regions are also demonstrated.     

A surgical case of liposarcoma in the chest wall within the thoracic cavity of a young patient

A 21-year-old man presented to our hospital on June 7, 1990, asymptomatic but with an abnormal shadow in his chest roentgenogram. A well-demarcated tumorous shadow was seen in the left hilum of the lung in the frontal view of the chest X-ray, and adjacent to the posterior chest wall in the lateral view. A percutaneous needle biopsy was performed, and since there were no malignant findings, the tumor was left untreated for future examinations. However, since the tumor was observed to be enlarging gradually in subsequent chest X-rays, it was resected surgically on June 18, 1991. The tumor was fist-sized and its surface smooth, and was protruding into the thoracic cavity. At surgery, the tumor was separated from the chest wall. The tumor, weighing 170 grams, was diagnosed pathologically as a liposarcoma (myxoid type). It was confirmed that there was no infiltration into the surrounding tissue and that total resection had been performed. There are few reports of liposarcomas within the thoracic cavity developing in the extra-mediastinal chest wall. As our case is the second in Japan occurring in a young patient, we present it here together with a review of the literature.     

Enhancement by ganglioside GT1b of annexin I phosphorylation in bovine mammary gland in the presence of phosphatidylserine and Ca2+

Ganglioside GT1b and, to a lesser extent, GD3, enhanced phosphorylation of a 36 kDa protein (the substrate of protein kinase C) in the particulate fraction from bovine mammary gland. Sialic acids, asialogangliosides, and GM3 were without effect, and GD1a conversely inhibited phosphorylation of the 36 kDa protein. The enhanced phosphorylation by GT1b required the simultaneous presence of phosphatidylserine (PS) and Ca²⁺. The 36 kDa protein reacted with anti-annexin I in Western blot analysis. Addition of purified annexin I to the reaction mixture containing the particulate fraction increased the extent of phosphorylated 36 kDa protein, and the phosphorylation was further enhanced by GT1b. The enhanced phosphorylation of annexin I by GT1b was also dependent on PS and Ca²⁺. When annexin I was phosphorylated by purified protein kinase C, GT1b inhibited the annexin I phosphorylation. Addition of epidermal growth factor or insulin to the particulate fraction had little effect on the enhancement. These results suggest that an enzyme or enzymes other than protein kinase C, epidermal growth factor receptor kinase, or insulin receptor kinase is responsible for the GT1b- and GD3-enhanced phosphorylation of annexin I in the presence of PS and Ca²⁺.     

Novel anion exchange membranes having fluorocarbon backbone: Preparation and stability

Anion exchange membranes with excellent durability were prepared by chemical modification of Nafion. The modification was achieved by transformation of the sulfonic acid group into quaternary ammonium group. Namely, Nafion membrane was first converted into an amide-type membrane. Reduction of the carbonxyl group to methylene followed by quaternarization with alkyl iodide resulted in the formation of an anion exchange membrane. The electric resistance of the resulting membranes depends on the equivalent weight of the starting membranes (4.4–6.0 Ω cm² in 0.5N NaCl). The characteristics of the membranes are the excellent stability toward chemical substances such as organic solvents, oxidizing agents, acids, etc. For example, the membranes are stable in aqueous saturated chlorine solution at 60°C for 1000 hr.     

Stabilization of bioethanol recovery with silicone rubber‐coated ethanol‐permselective silicalite membranes by controlling the pH of acidic feed solution

In order to produce highly concentrated bioethanol by pervaporation using an ethanol‐permselective silicalite membrane, techniques to suppress adsorption of succinic acid, which is a chief by‐product of ethanol fermentation and causes the deterioration in pervaporation performance, onto the silicalite crystals was investigated. The amount adsorbed increased as the pH of the aqueous succinic acid solution decreased. The pervaporation performance also decreased with decreasing pH when the ternary mixtures of ethanol/water/succinic acid were separated. Using silicalite membranes individually coated with two types of silicone rubber, pervaporation performance was significantly improved in the pH range of 5 to 7, when compared with that of non‐coated silicalite membranes in ternary mixtures of ethanol/water/succinic acid. Moreover, when using a silicalite membrane double‐coated with the two types of silicone rubber, pervaporation performance was stabilized at lower pH values. In the separation of bioethanol by pervaporation using the double‐coated silicalite membrane, removal of accumulated substances having an ultraviolet absorption maximum at approximately 260 nm from the fermentation broth proved to be vital for efficient pervaporation. Copyright © 2005 Society of Chemical Industry