Depicting the role of gas-solid interactions on the hydrodynamics of converging pneumatic riser

The understanding of the flow characteristics and effect of gas-solid interactions in pneumatic risers is fundamental to investigate to ensure effective design cost-effective operation. Thus, to understand the effect of gas-solid interactions on the hydrodynamics of newly proposed conversing risers, this study mainly focused on predicting pressure drop in the dilute phase pneumatic conveying system. The experiments were conducted in a converging riser having a convergence angle of 0.2693°. Various solid particles such as sago, black mustard, and alumina have been considered to study the effect of particle sizes and density on the pressure drop. The experimental outcomes indicate that the total pressure drop increases with an increase in the solid density and gas mass flow rate. Moreover, smaller particle sizes are also increased the pressure drop. An empirical correlation is developed for the prediction of total pressure drop ΔP_T in converging pneumatic riser via dimensional analysis. All dependent variables such as particle and air density, drag force, acceleration due to gravity, the mass flow rate of air and particle, the diameter of particle and converging riser, the height of converging riser were considered to develop the empirical correlation. The established relationship is tested, and experimental data have been fitted for its validation. The estimated relative error of less than 0.05 proved the significance of the developed correlation. Hence, it can be stated that the established relationship is useful in studying the effects of various parameters on the pressure drop across the length of the conversing riser.     

Performance Analysis of a Cognitive Radio Network Under Energy Harvesting from Primary User Emulation Attacker

Wireless Personal Communications - The paper reports the performance of an energy harvesting cognitive radio network under primary user emulation (PUE) attack. A secondary user (SU) can harvest...     

Tuning of shear thickening behavior and elastic strength of polyvinylidene fluoride via doping of ZnO-graphene

ZnO rice like nonarchitects are grafted on the graphene carbon core via a rapid microwave synthesis route. The prepared grafted systems are characterized via XRD, SEM, RAMAN, and XPS to examined the structural and morphological parameters. Zinc oxide grafted graphene sheets (ZnO-G) are further doped in β-phase of polyvinylidene fluoride (PVDF) to prepare the polymer nanocomposites (PNCs) via mixed solvent approach (THF/DMF). β-phase confirmation of PVDF PNCs is done by FTIR studies. It is observed that ZnO-G filler enhances the β-phase content in the PNCs. Non-doped PVDF and PNCs are further studied for rheological behavior under the shear rate of 1–100 s⁻¹. Doping of ZnO-G dopant to the PVDF matrix changes its discontinuous shear thickening (DST) behavior to continues shear thickening behavior (CST). Hydrocluster formation and their interaction with the dopant could be the reason for this striking DST to CST behavioral change. Strain amplitude sweep (10⁻³% -10%) oscillatory test reveals that the PNCs shows extended linear viscoelastic region with high elastic modulus and lower viscous modulus. Effective shear thickening behavior and strong elastic strength of these PNCs present their candidature for various fields including mechanical and soft body armor applications.     

Performance evaluation of breast lesion detection systems with expert delineations: a comparative investigation on mammographic images

Multimedia Tools and Applications - Performance of computerized diagnostic systems yearning to be approved by medical regulatory bodies must meet the expectations of human experts. Highly accurate...     

Alginate–chitosan composite hydrogel film with macrovoids in the inner layer for biomedical applications

Making of a layered composite using two biopolymer gels with regularly aligned voids in the inner layer is described in this article. Calcium alginate constituted the inner layer, within which voids of 500 μm diameter were embedded in monolayer or in multiple layers using a fluidic device for bubbling. The chitosan without any additional crosslinker was used to form the outer layer. The layered structure enabled compartmentalization of drug hold-up, and differential release rates. These aspects were reviewed using bovine serum albumin and vitamin B₁₂ as model solutes. The presence of voids at the inner layer of alginate increased the uptake, raising the level of absorptivity to more than 4000%. The composite film could hold two solutes at a time. The one, held inside the alginate layer started releasing only after 1 h of dipping in the release media. The adhesive strength between layers and the response of the composite film to compressive deformation are studied here. The effect of single or multiple layers of voids in the inner layer is reviewed. The slowing of degradation rate due to chitosan-encapsulation is experimentally determined. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47599.     

Comparative stability of aspartame and neotame in yoghurt

The comparative stability of aspartame and neotame was monitored in yoghurt during its processing, fermentation and storage. A solid‐phase extraction method was suggest changing it to developed for the isolation of aspartame and neotame. Pasteurisation (85 °C/30 min) resulted in approximately 47% and 3% loss of aspartame and neotame, respectively. During fermentation, 3% loss of aspartame was observed, but no loss of neotame. There was no significant effects on the stability of either aspartame or neotame during storage (4–7 °C/15 days). The results indicated that neotame was more stable than aspartame under both pasteurisation and fermentation conditions; however, during storage, both sweeteners exhibited excellent stability.     

Gain Enhancement of Antipodal Vivaldi Antenna for 5G Applications Using Metamaterial

The proposed system portrays the application space examination of a diverse cryptosystem processor with dynamic reconfiguration abilities. It is appropriate to a variety of signal processing application domains namely telecommunications, image processing, video coding and cryptographic processing. To differentiate between application spaces of the processor, the performance is correlated with cutting edge devices, taking ability to program, energy efficiency and computational potential as the important factors. In general the conventional method of computation is processed by means of Virtual Secure Circuit (VSC) on Advanced Encryption Standard (AES) and performance of the device Field Programmable Gate Array (FPGA) after implementation is analyzed in terms of delay and throughput. In the conventional method area overhead and power consumption are less where as the architecture lags in performance and throughput. It has been overcome through the fully parallel pipelined Architecture of the VSC on AES which outperforms the existing method in terms of performance and throughput. The energy efficiency and performance are considerably more important than processor that are used for general purpose, while still preserving a Convenient approach of programming that mainly bank on software oriented languages. The exploit of VSC based AES is to formulate the cryptographic processor held against Side Channel Attacks like attacks based on power supply and electromagnetic signals. Then the experimental result shows the promising outcomes when compared to previous methods.

     

Poly(N-vinylpyrrolidone)-stabilized colloidal graphene-reinforced poly(ethylene-co-methyl acrylate) to mitigate electromagnetic radiation pollution

Polymer Bulletin - Electrically conducting flexible polymeric nanocomposite has been fabricated through wet mixing method where conducting inclusion was acoustically exfoliated pristine graphene...