Fixed point theorems on fuzzy normed linear spaces

In this paper, definitions of strongly fuzzy convergent sequence, l-fuzzy weakly convergent sequence and l-fuzzy weakly compact set are given in a fuzzy normed linear space. The concepts of fuzzy normal structure, fuzzy non-expansive mapping, uniformly convex fuzzy normed linear space are introduced and fixed point theorems for fuzzy non-expansive mappings are proved.     

Bio-Inspired Artificial Fast-Adaptive and Slow-Adaptive Mechanoreceptors With Synapse-Like Functions

Development of artificial mechanoreceptors capable of sensing and pre-processing external mechanical stimuli is a crucial step toward constructing neuromorphic perception systems that can learn and store information. Here, bio-inspired artificial fast-adaptive (FA) and slow-adaptive (SA) mechanoreceptors with synapse-like functions are demonstrated for tactile perception. These mechanoreceptors integrate self-powered piezoelectric pressure sensors with synaptic electrolyte-gated field-effect transistors (EGFETs) featuring a reduced graphene oxide channel. The FA pressure sensor is based on a piezoelectric poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) thin film, while the SA pressure sensor is enabled by a piezoelectric ionogel with the piezoelectric-ionic coupling effect based on P(VDF-TrFE) and an ionic liquid. Changes in post-synaptic current are achieved through the synaptic effect of the EGFET by regulating the amplitude, number, duration, and frequency of tactile stimuli (pre-synaptic pulses). These devices have great potential to serve as artificial biological mechanoreceptors for future artificial neuromorphic perception systems.     

Anisotropic Materials for Skeletal‐Muscle‐Tissue Engineering

Repair of damaged skeletal‐muscle tissue is limited by the regenerative capacity of the native tissue. Current clinical approaches are not optimal for the treatment of large volumetric skeletal‐muscle loss. As an alternative, tissue engineering represents a promising approach for the functional restoration of damaged muscle tissue. A typical tissue‐engineering process involves the design and fabrication of a scaffold that closely mimics the native skeletal‐muscle extracellular matrix (ECM), allowing organization of cells into a physiologically relevant 3D architecture. In particular, anisotropic materials that mimic the morphology of the native skeletal‐muscle ECM, can be fabricated using various biocompatible materials to guide cell alignment, elongation, proliferation, and differentiation into myotubes. Here, an overview of fundamental concepts associated with muscle‐tissue engineering and the current status of muscle‐tissue‐engineering approaches is provided. Recent advances in the development of anisotropic scaffolds with micro‐ or nanoscale features are reviewed, and how scaffold topographical, mechanical, and biochemical cues correlate to observed cellular function and phenotype development is examined. Finally, some recent developments in both the design and utility of anisotropic materials in skeletal‐muscle‐tissue engineering are highlighted, along with their potential impact on future research and clinical applications.     

Video traffic analytics for large scale surveillance

The video traffic analysis is the most important issue for large scale surveillance. In the large scale surveillance system, huge amount of live digital video data is submitted to the storage servers through the number of externally connected scalable components. The system also contains huge amount of popular and unpopular old videos in the archived storage servers. The video data is delivered to the viewers, partly or completely on demand through a compact system. In real time, huge amount of video data is imported to the viewer’s node for various analysis purposes. The viewers use a number of interactive operations during the real time tracking suspect. The compact video on demand system is used in peer to peer mesh type hybrid architecture. The chunk of video objects move fast through the real time generated compact topological space. Video traffic analytics is required to transfer compressed multimedia data efficiently. In this work, we present a dynamically developed topological space, using mixed strategy by game approach to move the video traffic faster. The simulation results are well addressed in real life scenario.     

Experimental and FE analysis of submerged arc weld induced residual stress and angular deformation of single and double sided fillet welded joint

Submerged arc welding is well-known for its very high deposition rate and thus the capability to join very high thickness metal pieces in large structural applications. Fillet joints are mostly used in structural applications which can be extensively seen in shipbuilding, bridge construction, house buildings, automobile or any other large structures. Thermal stresses generates in a fusion welded joint due to high temperature gradient, which is the cause of the residual stresses upon cooling followed by the angular deformation and failure of the welded structure. As an effect of the thermal gradient, the induced longitudinal, transverse residual stress & angular distortion can vary in single sided and double sided submerged arc welded fillet joints, during designing & manufacturing welded structures which should be taken into account. The main objective of this paper is to quantify the amount of residual stresses and angular deformation in a fillet welding joint. An elasto-plastic thermomechanical model has been developed for predicting residual stresses. A comparison of the residual stress and angular deformation between single and double sided fillet weld joint has been made. The simulation results reveal that the amount of residual stress present in the single sided fillet weld is more and unbalanced in both side of the center of weld line compared to the double sided fillet weld and the predicted results have been matched with the experiments as well as published literatures.     

Function of magnesium aluminate hydrate and magnesium nitrate as MgO addition in crystal structure and grain size control of <Emphasis Type="Italic">α</Emphasis>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> during sintering

Chemically pure reactive alumina (α-Al₂O₃) which is commercially available was used for densification study in presence of widely accepted dopant MgO as additive. MgO was added both as spinel (MgAl₂O₄) forming precursor i.e. magnesium aluminate hydrate, and magnesium nitrate. Sintering investigations were conducted in the temperature range 1500–1600°C with 2 h soaking. Structural study of sintered pellets was carried out by extensive XRD analysis. Scanning electron mode SEM images of the specimens were considered to understand the effect of both types of additions. Addition of MgO within and beyond optimum amount had some effect on development of microstructure of sintered bodies. Densification, around 99% ρ _th, with fine grain microstructure was achieved. These different types of additions caused two distinct changes in crystal structure of alumina—one small contraction and the other expansion of unit cell parameters.     

Enumerating catastrophic fault patterns in VLSI arrays with both uni- and bidirectional links

Characterization of catastrophic fault patterns (CFPs) and their enumeration have been studied by several authors. Given a linear array with a set of bypass links, an important problem is how to count the number of CFPs. Enumeration of CFPs for two link redundancy G={1,g} has been solved for both unidirectional and bidirectional link cases. In this paper, we consider the more general case of link redundancy G={1,2,…,k,g}, 2k<g. Using random walk as a tool, we enumerate CFPs for both unidirectional and bidirectional cases.     

Binary liquid–liquid equilibria of aniline–paraffin and furfural–paraffin systems

Binary liquid-liquid-equilibria data for several aniline-paraffin and furfural-paraffin systems have been taken. These data along with data for other aniline-hydrocarbon and furfural-hydrocarbon systems from literature have been correlated using UNIFAC model. The UNIFAC group interaction parameters have been found to have a linear temperature dependence. The CH₂ groups in cyclo and non cyclo paraffins require different interaction parameters. It was also found that a scaling of the combinatorial term is necessary for higher molecular weight hydrocarbons.     

Static and impact fatigue behaviour of borosilicate glass

Failure of a borosilicate glass as a result of repeated impact has been studied. Impact fatigue study was conducted in an improved pendulum type repeated impact apparatus specially designed and fabricated for determining single and repeated impact strength. For elimination of the effect of humidity, repeated impact tests were carried out under liquid nitrogen. Quasi-static measurements were determined under four-point bending. Using a square waveform as applicable to the present impact tests and fracture mechanics interpretation, the number of cycles to failure during impact fatigue tests were predicted from quasi-static fatigue measurements. It has been shown that repeated impact loading has a deleterious effect on the failure cycles compared to slow stressing. The role of an added mechanical effect during repeated impacts has been suggested in controlling the cyclic fatigue behaviour. Paper presented at the poster session of MRSI AGM VI, Kharagpur, 1995