Fabrication of Wear-Resistant Ti3AlC2/Al3Ti Hybrid Aluminum Composites by Friction Stir Processing

Metallurgical and Materials Transactions A - Hybrid nanocomposites have potential as wear-resistant materials. However, synthesizing these nanocomposites by conventional molten state methods result...     

Analysis of conduction heat transfer problems in steady, 2D regions with circular holes using a special boundary integral method

A special boundary integral method developed for two-dimensional regions containing circular holes is used to calculate temperature and heat transfer on the boundaries of several selected regions. The geometrical configuration of the region is arbitrary and convective boundary conditions are assumed. An important feature of the method is analytic representation of temperature and its normal derivative on the interior circular holes in the form of a harmonic series. This makes the application of the boundary integral method convenient and free from conditioning problems associated with small interior boundaries. Heat transfer from circular isothermal interior holes are calculated for several illustrative examples using three terms of the harmonic series representation for heat transfer at each of the circular boundaries. The results are presented and discussed.     

Optimizing the design of railway tank cars to minimize accident-caused releases

The design of vehicles transporting hazardous materials has important public safety and economic implications. Conventional wisdom among industry and government has held that a thicker tank on railroad tank cars and trucks reduces risk. However, a thicker tank increases vehicle weight and thus leads to an increase in the number of shipments required to transport the same amount of product and consequently greater exposure to accidents. In this research we develop a model that analyzes the tradeoff between increased damage resistance and greater exposure to accidents in which the objective function is minimization of the probability of release. The model accounts for the reduction in tank car release probability as a function of tank thickness, and the increased exposure to accidents that occurs due to the increased number of shipments needed for the heavier car. Three variables affecting this optimal thickness are considered in this paper: the volumetric capacity of the tank, the probability of release from other, non-tank sources, and the weight capacity of the car. Sensitivity analyses using the model indicate that for any particular configuration of tank car there is an optimal thickness. This optimal thickness is affected by several factors and there is no single optimum for all tank cars.     

A routing framework for providing robustness to node failures in mobile ad hoc networks

Nodes in a mobile ad hoc network are often vulnerable to failures. The failures could be either due to fading effects, battery drainage, or as a result of compromised nodes that do not participate in network operations. Intermittent node failures can disrupt routing functionalities. As such, it is important to provide redundancy in terms of providing multiple node-disjoint paths from a source to a destination. In line with this objective, we first propose a modified version of the widely studied ad hoc on-demand distance vector routing protocol to facilitate the discovery of multiple node-disjoint paths from a source to a destination. We find that very few of such paths can be found. Furthermore, as distances between sources and destinations increase, bottlenecks inevitably occur and thus, the possibility of finding multiple paths is considerably reduced. We conclude that it is necessary to place what we call reliable nodes (in terms of both being robust to failure and being secure) in the network to support efficient routing operations. We propose a deployment strategy that determines the positions and the trajectories of these reliable nodes such that we can achieve a framework for reliably routing information. We define a notion of a reliable path which is made up of multiple segments, each of which either entirely consists of reliable nodes, or contains a preset number of multiple paths between the end points of the segment. We show that the probability of establishing a reliable path between a random source and destination pair increases tremendously even with a small number of reliable nodes when we use our algorithm to appropriately position these reliable nodes.     

Polymer transcrystallinity induced by carbon nanotubes

In this work, we provide the evidence of polymer transcrystallinity in the presence of carbon nanotubes (CNTs). The interfacial morphology of carbon nanotube fiber-polypropylene matrix is investigated by means of polarized optical microscopy (POM), wide-angle X-ray diffraction (WAXD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The supramolecular microstructures of polypropylene transcrystals induced by the nanotube fiber are observed in the range of isothermal crystallization temperatures from 118 °C to 132 °C. The dynamic process of transcrystallization is analyzed by using the theory of heterogeneous nucleation. Microstructure analysis shows that the nanotubes can nucleate the growth of both α- and γ-transcrystal, and α-transcrystals dominate the overall interfacial morphology. Close to the nanotube fiber surface, a cross-hatched lamellar microstructure composed of mother lamellae and daughter lamellae is observed.     

A Maximum Likelihood Stereo Algorithm

A stereo algorithm is presented that optimizes a maximum likelihood cost function. The maximum likelihood cost function assumes that corresponding features in the left and right images are normally distributed about a common true value and consists of a weighted squared error term if two features are matched or a (fixed) cost if a feature is determined to be occluded. The stereo algorithm finds the set of correspondences that maximize the cost function subject to ordering and uniqueness constraints. The stereo algorithm is independent of the matching primitives. However, for the experiments described in this paper, matching is performed on the $cf4$individual pixel intensities.$cf3$ Contrary to popular belief, the pixel-based stereo appears to be robust for a variety of images. It also has the advantages of (i) providing adensedisparity map, (ii) requiringnofeature extraction, and (iii)avoidingthe adaptive windowing problem of area-based correlation methods. Because feature extraction and windowing are unnecessary, a very fast implementation is possible. Experimental results reveal that good stereo correspondences can be found using only ordering and uniqueness constraints, i.e., withoutlocalsmoothness constraints. However, it is shown that the original maximum likelihood stereo algorithm exhibits multiple global minima. The dynamic programming algorithm is guaranteed to find one, but not necessarily the same one for each epipolar scanline, causing erroneous correspondences which are visible as small local differences between neighboring scanlines. Traditionally, regularization, which modifies the original cost function, has been applied to the problem of multiple global minima. We developed several variants of the algorithm that avoid classical regularization while imposing several global cohesiveness constraints. We believe this is a novel approach that has the advantage of guaranteeing that solutions minimize the original cost function and preserve discontinuities. The constraints are based on minimizing the total number of horizontal and/or vertical discontinuities along and/or between adjacent epipolar lines, and local smoothing is avoided. Experiments reveal that minimizing the sum of the horizontal and vertical discontinuities provides the most accurate results. A high percentage of correct matches and very little smearing of depth discontinuities are obtained. An alternative to imposing cohesiveness constraints to reduce the correspondence ambiguities is to use more than two cameras. We therefore extend the two camera maximum likelihood toNcameras. TheN-camera stereo algorithm determines the “best” set of correspondences between a given pair of cameras, referred to as the principal cameras. Knowledge of the relative positions of the cameras allows the 3D point hypothesized by an assumed correspondence of two features in the principal pair to be projected onto the image plane of the remainingN− 2 cameras. TheseN− 2 points are then used to verify proposed matches. Not only does the algorithm explicitly model occlusion between features of the principal pair, but the possibility of occlusions in theN− 2 additional views is also modeled. Previous work did not model this occlusion process, the benefits and importance of which are experimentally verified. Like other multiframe stereo algorithms, the computational and memory costs of this approach increase linearly with each additional view. Experimental results are shown for two outdoor scenes. It is clearly demonstrated that the number of correspondence errors is significantly reduced as the number of views/cameras is increased.     

Residual stress gradients along ion implanted zones — cubic crystals

Large internal strains and stresses can be produced by low temperature implantation over small distances from the free surface in a thick substrate. These are typically non-uniform and have large composition gradients. In dilute bcc solutions, containing unclustered interstitial implants, the residual macroscopic strains may be treated as isotropic. The calculation of residual strain (or stress) is based upon anisotropic elasticity theory and internal stress is given in terms of the dipole tensor for individual defects in single crystal films. In a completely elastic zone, forces act to maintain a rigid outside surface and cause the strain distribution to be zero along directions parallel to the free surface. This produces a strain magnification along the perpendicular direction from Poisson contractions. If the implanted zone is completely relaxed by plastic deformation, the strains are described by the free expansion strains due to both implants and lattice damage. There is no angular dependence of the free expansion strain in this extreme condition. One can determine whether a zone is completely elastic, completely relaxed by plastic deformation, or in some intermediate state from plots of strain against sin², where is the angle of tilt relative to the surface normal. These results may be obtained from X-ray Bragg intensity data by measuring shifts and line broadening from (hkl) planes at different tilt angles. Theoretical results are given for both single crystal and polycrystalline materials in terms of residual strain and stress.     

Interactions of polymers and organic admixtures on portland cement hydration

Interaction of polymers and other organic admixtures on Portland cement hydration is reviewed. This has been compiled in a systematic way. First hydration of Portland cement is described in short. Later, interaction with 4 important components of Portland cement is discussed. Finally interphase effects in polymer modified hydraulic cement are discussed. It is concluded that polymers and organic admixtures interact with the components of Portland cement when they come in contact with water. This interaction is due to ionic binding, causing cross-links which inhibit the film formation property of polymers and influence considerably the crystallisation process during the hardening of concrete. Some low molecular weight organic substances also have a considerable influence on Portland cement during its reaction with water.     

Controlled destruction of residual crosslinker in a silicone elastomer for drug delivery

In drug delivery systems that use silicone elastomers as a diffusion matrix for the active drug, it is common to crosslink the material by the hydrosilylation reaction. In this platinum‐catalyzed reaction, vinyl groups on a polymer add to the methyl siloxane hydride (MHS) groups on a low molecular mass crosslinker. With an excess of crosslinker, a fast curing is achieved and a fully crosslinked material is formed. Unreacted MHS groups were shown to remain in the elastomer after curing because of the excess crosslinker. In this work, a simple procedure was developed to eliminate the unreacted MHS groups from the final product. We found that storage of the product at +40°C and 75% relative humidity for a few weeks will effectively destroy the residual MHS groups in the elastomer. The effects of varying levels of humidity, oxygen, and temperature on this postcuring procedure were studied. The amount of MHS groups was measured with NMR and IR spectroscopy. We also found that the hardness of the material increased by approximately 25% as a consequence of this postcuring treatment. This increase is probably due to a secondary crosslinking reaction between MHS and silanol groups. Heat treatment at higher temperatures led to an even further increase in the hardness and compression modulus. Because no MHS groups remained in the elastomer when this heat treatment was started, it is apparent that another secondary crosslinking reaction is occurring, probably silanol condensation. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2254–2264, 2002     

Rightful ownership through image adaptive DWT-SVD watermarking algorithm and perceptual tweaking

In this paper, a tailored blended image adaptive watermarking scheme has been presented, which is based on DWT and SVD. Through this paper an attempt has been made to solve the problem of false positive while maintaining the robustness and imperceptibility with the help of principal component and perceptual tuning of the image. Perceptual tuning is a non-blind technique and based on the objective quality of image. The embedding strength is made dependent on watermark features as well as of host in wavelet domain by using tuning parameter which is user specific. The idea of embedding the principal component of intermediate frequency sub-bands of watermark image into singular values of perceptually tuned intermediate frequency sub-bands of host image have been exploited. The proposed algorithm is providing the adaptive behavior towards the image content for perceptual transparency and at the same time avoiding the possibility of false watermark extraction well supported by a private key, which is necessary at the time of extraction. Thus the proposed watermarking algorithm is a kind of non-blind, image adaptive and suitable for rightful ownership. Various comparative results make the algorithm superior in terms of intentional and non-intentional attacks. Also the algorithm is strong against the print and scan attack.