A comparative study on in vitro behavior of calcium silicate ceramics synthesized from biowaste resources

Calcium silicate ceramics have received significant attention for biomedical applications for their excellent bioactivity and osteoconduction properties. Sol-gel process is extensively used for the fabrication of calcium silicates. In sol-gel process, calcium nitrate tetra hydrate (Ca(NO₃)₂·4H₂O) and tetraethylorthosilicate (TEOS) are used as precursors. However, these precursors are expensive. The objective of this work was to compare in vitro behavior of calcium silicate (CaSiO₃) produced using biowaste such as rice husk ash (RHA) and eggshells (coded; NCS) with CaSiO₃ prepared using TEOS and Ca(NO₃)₂·4H₂O (coded; CCS). Thermal investigation results revealed that the crystallization temperature for NCS is relatively lower (772°C) than for CCS (870°C). Bioactivity was studied in vitro using simulated body fluid (SBF) with respect to mineralization rate of hydroxyapatite. Mineralization of a greater hydroxyapatite was observed on NCS ceramics than CCS ceramics after incubation for 3, 7, 14 days in SBF solution, which was confirmed using X-ray diffractometer, Fourier transform infrared spectroscopy, scanning electron microscopy-energy dispersive spectroscopy. Degradation studies were conducted in Tris-HCl solution and the test results revealed that NCS ceramics has lower dissolution rate than CCS ceramics. The antimicrobial assay has shown that NCS samples exhibit significant zone of inhibition against Escherichia coli and Staphylococcus aureus which confirmed that the CaSiO₃ prepared from RHA and eggshell can prevent bacteria from adhering to the surface. In addition cell culture studies revealed that NCS ceramics possess good cytocompatibility with MG-63 cells and significantly promoted cell proliferation.     

全流程低功耗设计技术的应用

随着便携式电子设备的日益使用,要求集成电路IC及SoC的功耗越来越低。在今后日益复杂的设计中,实现一个可靠的电源网络以减小功耗变成了主要的挑战。对于使用者来说,期待每一代新产品都具有新型功能,同时也希望产品的体积小并具有较长的工作时间。解决这个难题的方法之一就是采用新型的IC设计技术,以提供小而且高效的晶体管。在整个设计流程中,为了使器件的性能和可靠性最优,电源方面的限制非常关键。例如在逻辑门应用中,由于开关从一种状态转换到另一种状态从而引起动态功耗。在开关的转换过程中,和晶体管门极相连的所有内部电容将会被…     

Cost optimal, parallel reliability systems with fixed repair sanction

Optimisation methods under varied criteria for different parameters in stochastic reliability systems are being increasingly developed and have been reported in recent literature. The large interest evinced in this fascinating area is primarily due to its applicational value and operational role in the decision making process. Recently a parallel system has been considered and the optimal number of units discussed, as well as optimal replacement times for the system based on acquisition and replacement costs.In this paper we consider an improved version of the model formulation, by bringing in additionally the maintenance and per unit repair time costs, and develop a procedure to obtain the optimal number of components in the system with the condition that the system is allowed to undergo a prefixed maximum number of repairs, after which the system is to be replaced.The applicational use of the results is illustrated through numerical work, specialising to some known laws governing the system parameters and corresponding to different fixed number of repair sanctions.     

Analysis of supersaturation and nucleation in a moving solution droplet with flowing supercritical carbon dioxide

A supercritical antisolvent (SAS) process is employed for production of solid nanoparticles from atomized droplets of dilute solution in a flowing supercritical carbon dioxide (SC CO₂) stream by attaining extremely high, very rapid, and uniform supersaturation. This is facilitated by a two‐way mass transfer of CO₂ and solvent, to and from the droplet respectively, rendering rapid reduction in equilibrium solubility of the solid solute in the ternary solution. The present work analyses the degree of supersaturation and nucleation kinetics in a single droplet of cholesterol solution in acetone during its flight in a flowing SC CO₂ stream. Both temperature and composition are assumed to be uniform within the droplet, and their variations with time are calculated by balancing the heat and mass transfer fluxes to and from the droplet. The equilibrium solubility of cholesterol with CO₂ dissolution has been predicted as being directly proportional to the Partial Molar Volume Fraction (PMVF) of acetone in the binary (CO₂–acetone) system. The degree of supersaturation has been simulated up to the time required to attain almost zero cholesterol solubility in the droplet for evaluating the rate of nucleation and the size of the stable critical nuclei formed. The effects of process parameters have been analysed in the pressure range of 7.1–35.0 MPa, temperature range of 313–333 K, SC CO₂ flow rate of 0.1136–1.136 mol s^?1, the ratio of the volumetric flow rates of CO₂‐to‐solution in the range of 100–1000, and the initial mole fraction of cholesterol in acetone solution in the range of 0.0025–0.010. The results confirm an extremely high and rapid increase in degree of supersaturation, very high nucleation rates and stable critical nucleus diameter of the order of a nanometre. Copyright © 2005 Society of Chemical Industry     

Oxygen-enrichment of YBa2Cu3 YBa2Cu3O7-δ using the fluidization techniqueusing the fluidization technique

The oxygen-deficient phase of the highT _c superconductor, YBa₂Cu₃O₇, was oxygen-enriched using the fluidization technique to give good superconducting properties. The normal method of oxygen treatment at 900°C for 24 h and at 600°C for 24 h has been reduced to just one treatment at 600°C for 12 h by the fluidization technique to achieve almost the same strength of superconducting signal for the YBa₂Cu₃O₇ powder, which establishes the attractiveness of the latter route for the large-scale preparation of superconducting material. The particle sizes were in the range 0–90, 90–180 and 180–420 μm. The fluidized particles were crystalline with orthorhombic distortion.T _c ^onset , estimated using the a.c. magnetic susceptibility method, was 91·3 K. The volume fraction of superconducting material in the product was 83·7–85·3%, one of the highest values reported so far for YBa₂Cu₃O₇.     

建立基于模型设计文化的最佳策略

本文引入了基于模型设计的概念,突出了其中的一些优点,详细讨论了组织中采用基于模型设计文化的10个最佳策略。这些最佳策略从不同工业领域的公司中收集,包括向基于模型设计的成功或者不成功的过渡。     

A study of synthesizing benzaldehydes from propenylbenzenes and cinnamic acid derivatives

Propenylbenzenes and cinnamic acid derivatives yield correspondingly substituted benzaldehydes when oxidized by lead-ruthenium pyrochlore oxide in the presence of sodium hydrochlorite as a co-oxidant at pH 11 under heterogeneous conditions. The reaction of terminal and internal aliphatic alkenes under similar conditions affords no aldehydes.     

Descriptive epidemiology of childhood cancers in Bangalore, India

While fairly complete and reliable incident data on childhood cancers are available from the registries in India, mortality and survival information is not. Information concerning the latter was obtained by the Bangalore cancer registry through active follow-up involving visits to homes of patients. Between 1982 and 1989, 617 cases of cancers in childhood were registered, giving an age-standardized incidence rate of 84.8 and 48.4 per million in male and female children, respectively. Active follow-up provided mortality/survival information in 532 or 86.2 percent of these cases. Overall, observed five-year survival was 36.8 percent (both genders combined) with a relative survival of 37.5 percent when childhood mortality in the general population was taken into account. The five-year relative survival was best for thyroid carcinoma (100 percent) followed by Hodgkin's disease (73 percent) and retinoblastoma (72.9 percent). Survival was comparatively low, being 9.9 percent in acute nonlymphatic leukemia and less than 20 percent in rhabdomyosarcoma and the category grouped as 'other malignant neoplasms.' Survival in Hodgkin's disease was influenced by clinical stage at presentation, but was not statistically significant possibly due to small numbers.     

Urban water demand,climatic variation,and irrigation-water insecurity: interactive stressors and lessons for water governance from the Angat River basin (Philippines)

Climatic variation and intersectoral water competition increasingly challenge the effective provision of irrigation services. This article explores their combined effects on irrigation allocation from the Angat Reservoir (Philippines), where domestic water use in Metro Manila has overtaken regional irrigation as the dominant right-holder. Rules protecting Metro Manila’s large right to water ‘interact’ with dry spells to affect irrigation security in wet and dry seasons. Historically, irrigators were uncompensated because re-allocation’s cause was contested as (1) an unforeseeable climatic event (releasing domestic utilities of liability), or (2) produced by urban demand (requiring compensation). Trade-off rules must be prepared to navigate combinatory effects.     

Thermoplastic olefin/clay nanocomposites: Morphology and mechanical properties

Thermoplastic olefin (TPO)/clay nanocomposites were made with clay loadings of 0.6–6.7 wt %. The morphology of these TPO/clay nanocomposites was investigated with atomic force microscopy, transmission electron microscopy (TEM), and X‐ray diffraction. The ethylene–propylene rubber (EPR) particle morphology in the TPO underwent progressive particle breakup and decreased in particle size as the clay loading increased from 0.6 to 5.6 wt %. TEM micrographs showed that the clay platelets preferentially segregated to the rubber–particle interface. The breakup of the EPR particles was suspected to be due to the increasing melt viscosity observed as the clay loading increased or to the accompanying chemical modifiers of the clay, acting as interfacial agents and reducing the interfacial tension with a concomitant reduction in the particle size. The flexural modulus of the injection moldings increased monotonically as the clay loading increased. The unnotched (Izod) impact strength was substantially increased or maintained, whereas the notched (Izod) impact strength decreased modestly as the clay loading increased. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 928–936, 2004