Abscopal Effect of Frozen Autograft Reconstruction Combined with an Immune Checkpoint Inhibitor Analyzed Using a Metastatic Bone Tumor Model

We evaluated the abscopal effect of re-implantation of liquid nitrogen-treated tumor-bearing bone grafts and the synergistic effect of anti-PD-1 (programmed death-1) therapy using a bone metastasis model, created by injecting MMT-060562 cells into the bilateral tibiae of 6–8-week-old female C3H mice. After 2 weeks, the lateral tumors were treated by excision, cryotreatment using liquid nitrogen, excision with anti-PD-1 treatment, and cryotreatment with anti-PD-1 treatment. Anti-mouse PD-1 4H2 was injected on days 1, 6, 12, and 18 post-treatment. The mice were euthanized after 3 weeks; the abscopal effect was evaluated by focusing on growth inhibition of the abscopal tumor. The re-implantation of frozen autografts significantly inhibited the growth of the remaining abscopal tumors. However, a more potent abscopal effect was observed in the anti-PD-1 antibody group. The number of CD8+ T cells infiltrating the abscopal tumor and tumor-specific interferon-γ (IFN-γ)-producing spleen cells increased in the liquid nitrogen-treated group compared with those in the excision group, with no significant difference. The number was significantly higher in the anti-PD-1 antibody-treated group than in the non-treated group. Overall, re-implantation of tumor-bearing frozen autograft has an abscopal effect on abscopal tumor growth, although re-implantation of liquid nitrogen-treated bone grafts did not induce a strong T-cell response or tumor-suppressive effect.     

Controlled radical polymerization with polyolefin macroinitiator: a convenient and versatile approach to polyolefin-based block and graft copolymers

This paper introduces the new synthetic methodology of polyolefin-based block and graft copolymers with polar segments [e.g., polystyrene and poly(meth)acrylates]. Various brominated polyolefins were prepared by bromination of polyolefins with N-bromosuccinimide. The resulting brominated polyolefins were able to initiate the controlled radical polymerization of polar monomers, such as methyl methacrylate, ethyl acrylate, t-butyl acrylate, styrene and 2-(dimethylamino)ethyl acrylate, using a CuBr/N,N,N′,N″,N″-pentamethyldiethylenetriamine catalyst system, leading to a variety of polyolefin-based copolymers with a different content of the corresponding polar segment. Because of the accessible synthesis of polyolefin macroinitiators, this synthetic methodology is expected to result in the preparation of a wide range of polyolefin-based block and graft copolymers.     

Measurement and Estimation of High-Vacuum Effective Thermal Conductivity of Polyimide Foam in the Temperature Range from 160 K to 370 K for Outer Space Applications

Polyimide foam (PF) is a low-thermal conductivity and lightweight material with high resistances against heat, protons, and UV irradiation. A new thermal insulation composed of PFs and multiple aluminized films (PF–MLI) has potential to be used in outer space as an alternative to conventional multilayer insulation (MLI). As fundamental numerical data, the effective thermal conductivity of PF in wide ranges of density and temperature need to be determined. In the present study, thermal-conductivity measurements were performed by both the periodic heating method and the guarded hot-plate method in the temperature range from 160 K to 370 K and the density range from 6.67  \(\mathrm{kg} \cdot \mathrm{m}^{-3}\) to 242.63  \(\mathrm{kg}\cdot \mathrm{m}^{-3}\) . The experiments were carried out in a vacuum and under atmospheric pressure. For confirmation of the validity of the present guarded hot-plate apparatus under atmospheric pressure, the effective thermal conductivity of the lowest-density PF was measured with the aid of the heat flow meter apparatus calibrated by the standard reference material (NIST SRM 1450c) in the temperature range from 303 K to 323 K. In order to cross-check the present experimental results, the temperature and density dependences of the effective thermal conductivity of PF were estimated by means of the lattice Boltzmann method based on a dodecahedron inner microscopic complex structure model which reflects a real 3D X-ray CT image of PF.     

Study of drive system for linear induction motor using magnetic energy recovery switch

This paper proposes a power supply suitable for driving linear induction motors. The power supply consists of a voltage source inverter (VSI) and a magnetic energy recovery switch (MERS). Circuit configuration and operation principles of the power supply are described. Power factor correction by MERS can increase the output power. Technical advantages of using MERS compared with increasing the rated voltage of VSI are discussed. Some experiments with a linear induction motor were conducted. The results confirm that MERS can reduce the capacity of the VSI or increase the output with the same VSI capacity. The number of devices and magnitude of losses are evaluated on a large‐scale drive system. A half‐bridge type of MERS is provided and discussed. The half‐bridge MERS mitigates disadvantages of using MERS. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 169(4): 65–74, 2009; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20832     

Classification of Geothermal Energy Resources in Japan Applying Exergy Concept

Higher demand for energy consumption and importance of environmental issues has encouraged researchers and policy makers to consider renewable energies more seriously. Geothermal resources are a green energy source that can make a considerable contribution in some countries. Japan has the third ranking geothermal energy potential, and its geothermal electricity production is currently eighth in the world. Since the nature of geothermal resources dictates its method of utilization, it is important to categorize available resources. There is no consensus on classification of geothermal resources. Most scientists, from geologist to engineers, agree on the term temperature. However, temperature or enthalpy alone cannot describe the nature of fluids; they can have same temperature with different phases, such as saturated water or saturated steam. Using exergy for resource classification benefits their comparison, according to their ability to do work. In this paper, exergetic classification of geothermal resources was applied to 18 under‐operating geothermal power plants in Japan. Six geothermal fields have high exergy resources according to their SExI values in excess of 0.5. The remaining geothermal fields in Japan are classified in the medium resources zone. Classification results can be used by decision makers as a reference for future geothermal development. Copyright © 2012 John Wiley & Sons, Ltd.     

Measurement and calculation of neutron densities in BWR high burn-up fuels

A neutron-scanning device was developed for measuring accurate neutron densities of BWR high burn-up fuels up to 65 GWd tU⁻¹. Characteristic test of this device was done with a ²⁵²Cf source and adopted to measure axial distributions of neutron densities of BWR spent fuels with various enrichments (2.0–3.4%), which had been irradiated up to 60 GWd tU⁻¹ at Fukushima Daini Nuclear Power Station Unit 2(2F-2). We found the measured neutron densities were proportional to about fourth power of the corresponding burn-up values. The neutron densities calculated by the ORIGEN2.1 code and various cross section libraries showed good agreements with the measured ones in profile and absolute value except for BWR-UE file mainly based on ENDF/B-IV. The BS240J32 library based on JENDL3.2 was the best among the investigated libraries.     

Calculation of all cubic single-crystal elastic constants from single atomistic simulation: Hydrogen effect and elastic constants of nickel

Previous direct methods for evaluating all elastic constants require separate molecular dynamics runs with different loads. Here, we show that only a single run is enough to evaluate all elastic constants of cubic crystals. We evaluate the temperature dependence of all elastic constants of Ni to check the reliability of the embedded-atom method potential developed by Angelo et al. and study the effects of hydrogen on elastic constants.     

Mixed powder coating film using thermoplastic polyester and its alkaline resistance

To improve alkaline resistance, a newly mixed powder coating film using thermoplastic polyethylene terephthalate (PET) was investigated. Two kinds of polyvinyl butyral (PVB) and two kinds of polyamide (PA) were chosen as the secondary polymer. The melting temperatures (T _ms) of these materials were lower than that of primary PET polymer so the mixed powder coating was able to form a dual phase film through a fluidized bed coating process. Microscope and Fourier transform infrared spectroscopy (FTIR) observations revealed that the dual phase structure was indeed successfully formed and there was a secondary layer over the entire surface area of the film. This mixed powder coating film significantly enhanced the alkaline resistance to an environment filled with NaOH solution at 40°C in which a secondary material would be effective in protecting the film. With regard to both alkaline resistance and film formability, PET/PVB was superior to the PET/PA mixture.