A cathode support structure for use in a magnetron oscillator experiment

A low temperature co-fired ceramic (LTCC) material system has been used to develop a protype field emission cathode structure for use in an experimental magnetron oscillator. The structure is designed for used with 30 gated field emission array (GFEA) die electrically connected through silver metal traces and electrical vias. To approximate a cylinder, the cathode structure (48 mm long and 13.7 mm in diameter) is comprised of 10 faceted plates which cover the GFEA dies. Slits in the facet plates allow electron injection. The GFEA die (3 mm × 8 mm) are placed in axial columns of 3 and spaced azimuthally around a cylindrical support structure in a staggered configuration resulting in 10 azimuthal locations. LTCC manufacturing techniques were developed in order to fabricate the newly designed cathode with seven layers wrapped to form the cylinder with electrical traces and vias. Two different cathode wrapping techniques and two different via filling techniques were studied and compared. Two different facet plate manufacturing techniques were studied. Finally, four different support stand configurations for firing the cylindrical structure were also compared with a square post stand having the best circularity and linearity measurements of the fired structure.     

Dispersion analysis of multilayer cylindrical transmission linescontaining magnetized ferrite substrates

Recently, there has been a growing interest in using cylindrical transmission lines that contain magnetized ferrite material in a variety of applications. In this paper, the finite-difference time-domain (FDTD) method (in cylindrical coordinates) and the spectral-domain analysis (SDA) are used to calculate the propagation characteristics of cylindrical transmission lines that contain magnetized ferrite material. The magnetization can be either in the longitudinal or azimuthal directions. Specifically, the cylindrical microstrip line, and the cylindrical coplanar waveguide printed on magnetized ferrite substrate are analyzed. Both the FDTD and SDA results are in very good agreement. In addition, the results are compared to those of planar structures by taking the radius of the substrate to be large enough such that the curvature effect is negligible     

Rate of ammonia oxidation in a synthetic saline wastewater by a nitrifying mixed‐culture

Most of the kinetic studies on nitrification have been performed in diluted salts medium. In this work, the ammonia oxidation rate (AOR) was determined by respirometry at different ammonia (0.01 and 33.5 mg N‐NH₃ L^?1), nitrite (0–450 mg N‐NO₂^? L^?1) and nitrate (0 and 275 mg N‐NO₃^? L^?1) concentrations in a saline medium at 30 °C and pH 7.5. Sodium azide was used to uncouple the ammonia and nitrite oxidation, so as to measure independently the AOR. It was determined that ammonia causes substrate inhibition and that nitrite and nitrate exhibit product inhibition upon the AOR. The effects of ammonia, nitrite and nitrate were represented by the Andrews equation (maximal ammonia oxidation rate, r_AOMAX, = 43.2 [mg N‐NH₃ (g VSS_AO h)^?1]; half saturation constant, K_SAO, = 0.11 mg N‐NH₃ L^?1; inhibition constant K_IAO, = 7.65 mg N‐NH₃ L^?1), by the non‐competitive inhibition model (inhibition constant, K_INI, = 176 mg N‐NO₂^? L^?1) and by the partially competitive inhibition model (inhibition constant, K_INA, = 3.3 mg N‐NO₃^? L^?1; α factor = 0.24), respectively. The r_AOMAX value is smaller, and the K_SAO value larger, than the values reported in diluted salts medium; the K_IAO value is comparable to those reported. Process simulations with the kinetic model in batch nitrifying reactors showed that the inhibitory effects of nitrite and nitrate are significant for initial ammonia concentrations larger than 100 mg N‐NH₄⁺ L^?1. Copyright © 2005 Society of Chemical Industry     

Video compression using spatiotemporal regularity flow.

We propose a new framework in wavelet video coding to improve the compression rate by exploiting the spatiotemporal regularity of the data. A sequence of images creates a spatiotemporal volume. This volume is said to be regular along the directions in which the pixels vary the least, hence the entropy is the lowest. The wavelet decomposition of regularized data results in a fewer number of significant coefficients, thus yielding a higher compression rate. The directions of regularity of an image sequence depend on both its motion content and spatial structure. We propose the representation of these directions by a 3-D vector field, which we refer to as the spatiotemporal regularity flow (SPREF). SPREF uses splines to approximate the directions of regularity. The compactness of the spline representation results in a low storage overhead for SPREF, which is a desired property in compression applications. Once SPREF directions are known, they can be converted into actual paths along which the data is regular. Directional decomposition of the data along these paths can be further improved by using a special class of wavelet basis called the 3-D orthonormal bandelet basis. SPREF -based video compression not only removes the temporal redundancy, but it also compensates for the spatial redundancy. Our experiments on several standard video sequences demonstrate that the proposed method results in higher compression rates as compared to the standard wavelet based compression.     

Study of the morphology and mechanical properties of polypropylene composites with silica or rice‐husk

The mechanical, morphological behavior and water absorption characteristics of polypropylene (PP) and silica, or PP and rice‐husk, composites have been studied. The silica used in this study as filler was a commercial type produced from soluble glass or rice husks. The compatibilizing effect of PP grafted with monomethyl itaconate (PP‐g‐MMI) and/or with vinyltriethoxysilane (PP‐g‐VTES) as polar monomers on the mechanical properties and water absorption was also investigated. In general, a high loading of the studied fillers in the polymer matrix increases the stiffness and the water absorption capacity. This effect is more noticeable in the tensile modulus of the PP/silica composite with PP‐g‐VTES as compatibilizer. However, the increase of the rice‐husk charge as a natural filler in the PP matrix decreases the stiffness, and in the presence of PP‐g‐MMI as compatibilizer in PP/rice‐husk, the tensile modulus and water absorption of the composite were improved. The better adhesion and phase continuity in the PP/silica and PP/rice‐husk composites with different compatibilizers was confirmed by the morphological study. Copyright © 2004 Society of Chemical Industry     

Numerical simulations of cantilever beam response with saturation control and full modal coupling

Numerical simulations of the response of a uniform, cantilever beam subjected to a base excitation are performed. A saturation absorber is implemented to control the beam response. In previous investigations of similar configurations, the inertial and structural properties of the piezoelectric actuators have been neglected, resulting in an analytical model of a uniform beam. This investigation includes the nonuniformities in the beam properties that are introduced when piezoelectric actuators are bonded to the uniform beam. The resulting coupling between uniform, cantilever beam modes is fully included in the analytical model. It is shown that this modal coupling has a significant effect on the beam response, which is not present when modal coupling is neglected.     

Haemolytic activity of Aeromonas species isolated in Libya

Twenty seven Aeromonas strains (5A. hydrophila, 8A. sobria and 14A. caviae) isolated from children with diarrhoea and 34 Aeromonas strains (9A. hydrophila, 7A. sobria an 18A. caviae) isolated from children without diarrhoea were tested from haemolysin production. The results obtained showed that haemolysin production using human, horse or sheep erythrocytes was significantly associated with A.hydrophila and A sobria but not with A.caviae, regardless of whether these strains were isolated from children with or without diarrhoea. Human or horse rather than sheep erythrocytes are recommended for use in the haemolysin assay.