Effect of wastewater composition on archaeal population diversity

Distribution and occurrence of Archaea and methanogenic activity in a laboratory scale, completely mixed anaerobic reactor treating pharmaceutical wastewaters were investigated and associated with reactor performance. The reactor was initially seeded with anaerobic digester sludge from an alcohol distillery wastewater treatment plant and was subjected to a three step feeding strategy. The feeding procedure involved gradual transition from a glucose containing feed to a solvent stripped pharmaceutical wastewater and then raw pharmaceutical wastewater. During the start-up period, over 90% COD removal efficiency at an organic loading rate (OLR) of 6 kg COD m(-3)d(-1) was achieved with glucose feeding, and acetoclastic methanogenic activity was 336 ml CH4 gTVS(-1)d(-1). At the end of the primary loading, when the feed contained solvent stripped pharmaceutical wastewater at full composition, 71% soluble COD removal efficiency was obtained and acetoclastic methanogenic activity decreased to half of the rate under glucose feed (166 ml CH4 gTVS(-1)d(-1)). At the end of secondary loading with 60% (w/v) raw pharmaceutical wastewater, COD removal dropped to zero and acetoclastic methanogenic activity fell to less than 10 ml CH4 gTVS(-1)d(-1). Throughout the course of the experiment, microbial community structure was monitored by DGGE analysis of 16S rRNA gene fragments. Five different archaeal taxa were identified and the predominant archaeal sequences belonged to methanogenic Archaea. Two of these showed greatest sequence identity with Methanobacterium formicicum and Methanosaeta concilii. The types of Archaea present changed little in response to changing feed composition but the relative contribution of different organisms identified in the archaeal DGGE profiles did change.     

Comparative evaluation of full‐scale UASB reactors treating alcohol distillery wastewaters in terms of performance and methanogenic activity

In this study, two full‐scale upflow anaerobic sludge blanket (UASB) reactors, namely TUASB and CUASB, at the wastewater treatment plants of the Tekirdaǧ Alcohol (Raki) and Canakkale Alcohol (Cognac) distilleries were investigated in terms of performance, acetoclastic methanogenic capacity and microbial composition. The results were compared with a previously studied other UASB reactor (IUASB) at the wastewater treatment plant of the Istanbul Alcohol (Raki) Distillery from which the two reactors (TUASB and CUASB) were seeded. The IUASB reactor performed well achieving COD removal efficiencies of no lower than 85% at organic logding rates (OLRs) in the range of 6–11 kg COD m⁻³ day⁻¹ between 1996 and 2001. During the last one year of operation, between 2000 and 2001, performance of the CUASB reactor in terms of COD removal efficiency was 70–80% at OLRs in a range of 1–4.5 kg COD m⁻³ day⁻¹ whereas it was 60–80% at OLRs in a range of 2.5–8.5 kg COD m⁻³ day⁻¹ in the TUASB reactor. At the end of year 2000, specific methanogenic activity (SMA) tests were carried out to determine potential loading capacity and optimum operating conditions of the IUASB, CUASB and TUASB reactors. The potential methane production (PMP) rates of the CUASB, IUASB and TUASB reactors were measured as 230 cm³ CH₄ gVSS⁻¹ day⁻¹, 350 cm³ CH₄ gVSS⁻¹ day⁻¹ and 376 cm³ CH₄ gVSS⁻¹ day⁻¹ respectively. When the PMP rates were compared with actual methane production (AMP) rates obtained from the three UASB reactors, AMP/PMP ratios were evaluated to be 0.18, 0.12 and 0.13 for CUASB, TUASB and IUASB reactors respectively. This showed that the CUASB, TUASB and IUASB reactors were using only 18%, 12% and 13% of their potential acetoclastic methanogenic capacity respectively. These results can be interpreted that the three UASB reactors were underloaded compared with their potential acetoclastic methanogenic capacities. It was, therefore, recommended that the three UASB reactors should be loaded at higher organic loading rates or sludge withdrawn in order to maintain an AMP/PMP ratio of 0.6–0.7, which can ensure desired reactor performance with safer operation. Results of epifluoresence microscopic examinations showed that the percentage of total autofluorescent methanogens was approximately 30% of the total population in sludges from the TUASB and IUASB reactors whereas it was 20% in sludge from the CUASB reactor. The two UASB reactors treating raki distillery wastewaters contained sludges having a higher percentage of autofluorescent methanogenic population and higher acetoclastic methanogenic activity. Copyright © 2004 Society of Chemical Industry     

Overview of Water Policy Developments: Pre- and Post-2015 Development Agenda

The year 2015 marked the end of some important universal decisions regarding water developments. The International Decade for Action ‘Water for Life’ (2005–2015) was concluded so that a “Post-2015 Development Agenda” is now defined. 2015 was also the year when UN Millenium Goals (MDGs) came to an end to convert into the new Agenda, which is a process led by the United Nations (UN) to define the future global development framework. The proposed goal is now referred to as SDG’s or Sustainable Development Goals, that extend existing commitments such as the MDGs and the priorities of Rio + 20. SDG’s will balance the economic, social and environmental dimensions of sustainable development with a strong linkage between environment and socio-economic goals. They converge with the post-2015 development agenda, now called Agenda 30 as these goals will be valid until 2030. One of the major concepts of SDG’s is water security, which is the basic element of the Global Goal on Water. Water security is the capacity of a population to safeguard sustainable access to adequate quantities of acceptable quality of water for sustaining livelihoods, human well-being, and socioeconomic development, for ensuring protection against pollution and waterrelated disasters, and for preserving ecosystems in a climate of peace and political stability. This paper discusses the developments in water management within the last 30 years, which eventually led to the above concepts. A summary is provided on key events and documents of these past years to point out how the international community has reacted towards present and emerging needs of the society.     

Comparison of the translucency of two multishaded composite resins polymerized with direct or indirect method

The aim of this study was to measure the translucency of one indirect and direct resin composite after polymerization and to examine the effect of color parameters on this property. Tescera and Filtek Ultimate, each containing three shade groups (Enamel, Dentin and Body for Filtek Ultimate; and Incisal, Opaceous Dentin and Body for Tescera), were investigated. The translucency parameter (TP) was measured as the color difference between a specimen over a white and black background. Significant differences were observed in TP values between shade groups. Tukey’s multiple comparison test revealed TP values among the groups of Filtek Ultimate-Enamel > Tescera-Incisal > Filtek Ultimate-Body > Tescera-Body = Filtek Ultimate-Dentin > Tescera-Opaceous Dentin. In conclusion, it is concluded that the translucency of resin composite was affected by polymerization and color parameters.     

Slurry analysis after lead collection on a sorbent and its determination by electrothermal atomic absorption spectrometry

In this study, in order to eliminate the drawbacks of elution step and to reach higher enrichment factors, a novel preconcentration/separation technique for the slurry analysis of sorbent loaded with lead prior to its determination by electrothermal atomic absorption spectrometry was described. For this purpose, at first, lead was collected on ethylene glycol dimethacrylate methacrylic acid copolymer (EGDMA-MA) treated with ammonium pyrolidine dithiocarbamate (APDC) by conventional batch technique. After separation of liquid phase, slurry of the sorbent was prepared and directly pipetted into graphite furnace of atomic absorption spectrophotometer. Optimum conditions for quantitative sorption and preparation of the slurry were investigated. A 100-fold enrichment factor could be easily reached.

The analyte element in certified sea-water and Bovine-liver samples was determined in the range of 95% confidence level. The proposed technique was fast and simple and the risks of contamination and analyte loss were low. Detection limit (3δ) for Pb was 1.67 μg l⁻¹.     

Optical properties of sol–gel dip-coated Ta2O5 films for electrochromic applications

Amorphous Ta₂O₅ films were prepared by sol–gel dip process on different substrates. The dip-coating technique was used to prepare amorphous Ta₂O₅ films by hydrolysis and condensation of tantalum ethoxide, Ta(OC₂H₅)₅, precursor. Stable coating solutions were prepared using acetic acid as a chelating ligand and catalyzer. Single layer and multi-layered Ta₂O₅ films were fabricated at a dipping rate of 107 mm/min. The microstructure, stoichiometry and optical properties of these films were investigated as a function of the film thickness. Room temperature CV measurements clearly revealed a protonic conductor behavior for Ta₂O₅ films. Optical properties such as refractive index, extinction coefficient and optical band gap value of the Ta₂O₅ films were calculated from optical transmittance measurements. It was found that the refractive index and extinction coefficient values were affected by the thickness of the coatings. The refractive index at a wavelength of 550 nm increased from 1.70 to 1.72 with increasing film thickness. The optical band gap value (3.75±0.12 eV) of the coating was unaffected by the film thickness. These results indicate that sol–gel-deposited Ta₂O₅ films have a promising application as proton conductors in electrochromic devices.     

Electron beam penetration of poly (methyl methacrylate)/colemanite composite irradiated at low earth orbit space radiation environment

Poly (methyl methacrylate) modification by colemanite (CMT) addition has ensured beta shielding improvement. This study has connected with space environmental utilization with Kibo Japanese Experiment Module on International Space Station at low earth orbit. Space environment experiment was performed by using Kibo Experiment Handrail Attachment Mechanism–ExHAM. The changes in beta transmission of the composite were examined (by Sr-90 radioisotope) before and after space environmental utilization and details on beta penetration capacity was examined to protect the equipment (used in aviation and aerospace industries) from space radiation. Beta attenuation variations have indicated composite densification with beta attenuation enhancement after CMT addition.     

The effect of exfoliation and plasma application on the properties of continuous graphene oxide fiber

This study has been performed on continuous graphene oxide fiber produced by different production parameters which has very large potential application areas such as electronic/smart textiles, sensors, energy. In this study, three different graphene oxide dispersion preparation methods; namely, Modified Hummers, Modified Hummers on exfoliated graphite and Modified Hummers with plasma application; have been used to prepare coagulated continuous graphene oxide fibers. The effect of production parameters on properties of continuous graphene oxide fibers have been measured by Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), X-Ray Photoelectron Microscopy (XPS), tensile tester, electrical conductivity device. It was observed that exfoliation process results with decrease of fiber Tex count, fiber surface roughness, oxygen functional groups and an increase of breaking strength and electrical conductivity, while plasma application results to an increase of surface roughness of fiber, oxygen functional groups and decrease of breaking strength of fiber.     

Temperature rises during tooth bleaching with different light-curing units

The aim of this study was to evaluate the influence of three different light-curing units on the temperature rise induced in the pulpal cavity, when bleached with 35% hydrogen peroxide (HP). Forty extracted maxillary central incisors were randomly divided into four groups according to photoactivation procedure (n = 10). Whiteness HP (WHP) bleaching agent which contains 35% HP bleach was placed on the facial tooth surface and no photoactivation device was used (control); an blue light-emitting diode (LED, 40 s), a diode laser (4 W, Continous mode, 20 s), and Nd:YAG laser (4 W, 60 Hz frequency, 20 s). Temperature rise in the pulpal chamber was measured with a J-type thermocouple wire that was connected to a data logger before and immediately after each 20–40 s application. One tooth of each group was selected for scanning electron microscope analysis. Data were analyzed using one-way ANOVA followed by the Games Howell post hoc test at a preset α of 0.05. One-way ANOVA revealed that there was a significant difference among the light-curing units (p < 0.05) and between control group and light-curing units (p < 0.05). The Nd:YAG induced significantly, which resulted in higher temperature increase than other light-curing units (10.7 °C). The LED unit produced the lowest temperature changes (3.2 °C) among the light-curing units. The presence of the bleaching gel did not cause a temperature increase in control group (0 °C). The results suggested that using light-curing units caused temperature changes in the intrapulpal cavity during tooth bleaching. The use of LED will be more safer for pulpal health when assisted with WHP bleaching gel.