Hydrothermal synthesis of Ag2CO3-TiO2 loaded reduced graphene oxide nanocomposites with highly efficient photocatalytic activity

Abstract

In this work, a growth of Ag₂CO₃-TiO₂ NPs over GO sheets and reduction of GO were simultaneously achieved by the hydrothermal process at 130 °C for 4?h. The photocatalytic activity of the as-prepared Ag₂CO₃-TiO₂ NPs decorated reduced graphene oxide (Ag₂CO₃-TiO₂/rGO) composite was studied by the degradation of methylene blue (MB) solution under visible light irradiation. A remarkable enhancement in the photocatalytic activity of the TiO₂ was achieved after sensitizing with Ag₂CO₃ and loading in rGO sheets which is attributed to the reduced charge recombination, enhanced dye adsorption, and the improvement in the light harvesting capacity of the composite.     

Hydroisomerization of n-hexadecane over Brønsted acid site tailored Pt/ZSM-12

Hydroisomerization of n-hexadecane is performed over ZSM-12 framework having tailored Brønsted acidity to investigate the effect in terms of product selectivity and yield. For this purpose, pure phase of ZSM-12 (bulk molar ratio Si/Al ~ 60) has been synthesized using TEABr as a structure directing agent. The framework Brønsted acidity is tailored with group II elements (M) viz. Ca, Ba and Mg, by means of ion-exchange method. The samples so prepared have been characterized for phase purity, textural parameters, morphology by employing powder X-ray diffraction, nitrogen adsorption–desorption isotherm measurement at 77 K, and scanning electron microscopy technique, respectively. Similarly, % metal exchange is estimated using inductively coupled plasma technique. The quantification of Brønsted acidity for H⁺–M⁺⁺–ZSM-12 samples has been estimated by means of ammonia temperature programmed desorption (NH₃-TPD) and Fourier transform infrared spectroscopy of ammonia (NH₃-FTIR). The well characterized H⁺–M⁺⁺–ZSM-12 samples were loaded with Platinum (Pt, 0.5 wt%) and subjected to hydroisomerization of n-hexadecane using an up-flow fixed bed reactor to verify the effect of process parameters like temperature and WHSV. Pt/H⁺–Ba²⁺–ZSM-12 with tailored Brønsted acidity in the range of about 25 % demonstrated the optimum performance among all the catalysts with an increased isomer selectivity and yield (89.2 and 80.3 %, respectively) by about 4 wt% at a conversion level of about 90 % compared to Pt/H⁺–ZSM-12 framework at 568 K. Such enhancement in isomer selectivity and yield is found to be significant from commercial application point of view. Based on the obtained trend, the potential benefits of implementation of Pt/H⁺–Ba²⁺–ZSM-12 (bulk molar ratio Si/Al ~ 60) framework for cold flow property improvement of ‘bio-ATF’ have been envisaged.     

Cavitation Erosion Characteristics of Nitrocarburized and HPDL-Treated Martensitic Stainless Steels

This article deals with plasma ion-nitrocarburising and high power diode laser (HPDL) surface treatment of 13Cr4Ni and X10CrNiMoV1222 martensitic stainless steels to enhance their cavitation erosion resistance. These steels are commonly used in hydro turbines and boiler feed pumps. These treated steels have been evaluated for cavitation erosion resistance and it has been observed that the plasma ion-nitrocarburising process has significantly enhanced the cavitation erosion resistance as compared to untreated steel whereas HPDL-treated steels have shown marginal improvement. This is due to formation of high hardness nitrides during nitrocarburising and formation of moderate hardness martensitic phase due to rapid heating and cooling rates involved in HPDL treatment. The cavitation erosion and micro-hardness data of plasma ion-nitrocarburized as well as HPDL-treated steel samples and their comparison with hard deposits such as stellite and HVOF coating form the main part of the article.     

Cavitation Erosion Behavior of HPDL-Treated TWAS-Coated Ti6Al4V Alloy and Its Similarity with Water Droplet Erosion

Twin wire arc-sprayed (TWAS) coating of commercially available SHS 7170-cored wire was obtained on Ti6AL4V alloy, and to improve its properties, it was further surface treated with high-power diode laser (HPDL). The cavitation erosion (CE) resistance of TWAS-coated samples was evaluated as per ASTM G-32-2003 and it was compared with laser-treated and untreated Ti6Al4V alloys. The CE resistance of TWAS-coated SHS 7170 samples after HPDL treatment has improved significantly. The main reasons for its improvement are elimination of pores, increased fracture toughness, reduced hardness, and brittleness. The CE resistance of HPDL-treated TWAS coating is compared with water droplet erosion resistance. It is observed that there is a similarity in the both the phenomenon.     

Mechanical property enhancement of non‐bonding electrospun mats via adhesive

In the present study, the effect of adhesive on the morphology of different electrospun polymeric mats was investigated. The modification of two polymers, poly(methyl methacrylate) and poly(vinyl chloride), was carried out by blending the polymers with different amounts of poly(butyl acrylate) (PBA) adhesive to investigate the effect of different amounts of adhesive with heat hardener in hybrid mats. The introduction of various concentrations of PBA into different polymer solutions led to the formation of point‐bonded electrospun fibrous mats. Scanning electron microscopy images indicated that point‐bonded polymer/adhesive fibers were uniformly distributed throughout the mats. Fourier transform infrared spectrometry, contact angle measurements and thermogravimetric analysis were used to study the different properties of the hybrid mats. The tensile strength of the blended fibrous electrospun mats was increased effectively. This enhancement of the mechanical properties of the mats due to the presence of adhesive increases the number of potential applications of the electrospun mats, especially for mechanically weak polymers. Copyright © 2012 Society of Chemical Industry     

Design and development of guided four beam cantilever type MEMS based piezoelectric energy harvester

Microsystem Technologies - MEMS devices have found applicability in remote area of operation such as temperature monitoring in extreme climates, structural health monitoring, and car tire pressure...     

Characterization of micellar systems produced by new amphiphilic conjugates of poly(ethylene glycol)

This study proposes polymeric micelles produced using new amphiphilic conjugates between amino- or carboxy-mPEG₂₀₀₀ and three different α-lipoamino acids (PEG-LAA). The characterization of these colloidal systems showed CMC values, in the order of 10^?5?M, that are interesting in the view of an in vivo administration. The PEG-LAA micelles also showed a good stability at 37?°C and upon dilution in aqueous media. Using a colored probe as a model lipophilic compound, the loading efficiency and in vitro release profile were also outlined.     

Analysis of a Multiphase Induction Machine Under Fault Condition in a Phase-Redundant A.C. Drive System

Phase-redundancy is a unique technique for improving the reliability of large variable speed AC drives. This technique, derived from the concept of parallel-redundancy, is based on the capability of a multiphase machine to start and continue running with one or more of its many stator phases open or short circuited with lower performance. Structural unbalance in the machine following loss of excitation is the main source of performance degradation. This paper, therefore, presents a simple generalized approach to analyze the dynamic as well as steady-state behavior of a multiphase induction machine during fault condition in a phase-redundant AC drive system. The key analytical results have been experimentally verified by tests conducted on a laboratory prototype.