Issues and Requirements for Aluminum Alloys Used in Aircraft Components: State of the Art

Russian Journal of Non-Ferrous Metals - Aluminum alloys have always been the material of choice for the aircraft industry owing to their versatile attributes, such as excellent strength to weight...     

Effect of matrix content on the performance of carbon paper as an electrode for PEMFC

Porous conducting carbon fiber‐based composite paper is used as an electrode backing in the fuel cell assembly. It not only acts as a channel through which the reactant and product gases pass to and from the bipolar plate and the catalyst site but also helps in the flow of electrons. In order to perform its role efficiently, it should have sufficient strength, high electrical conductivity, and ideal porous structure. Carbon paper has been fabricated, which builds up the required composite properties. Studies have been conducted to optimize the fiber/matrix ratio in the carbon paper, while ensuring the perfect combination of porosity, mechanical strength, and electrical conductivity for an electrode in a proton electrolyte membrane fuel cells. Detail physico‐mechanical and electrochemical characterizations further ascertain that the fiber/matrix ratio plays an important role in tuning the composite properties. The polarization curve of the unit proton exchange membrane (PEM) fuel cell (with an effective electrode area 4 cm²) shows a peak power density of 916 mW/cm² for the sample with fiber/matrix ratio of 65:35, which is almost the same as the commercially available sigracet gas diffusion layer (SGL) carbon paper tested under similar conditions. Further, proportionally enlarging the electrode area to 100 cm² shows that the carbon paper not only shows almost repeatable results in a given set up but also scales up.     

Natural circulation studies in a lead bismuth eutectic loop

Lead Bismuth Eutectic (LBE) is increasingly getting more attraction as the coolant for advanced reactor systems. It is also the primary coolant of the Compact High Temperature Reactor (CHTR), being designed at BARC. A loop has been set up for thermal hydraulics, instrument development and material related studies relevant to CHTR. Steady state natural circulation experimental studies were carried out for different power levels. Transient studies for start-up of natural circulation in the loop, loss of heat sink and step power change have also been carried out. An 1D code named LeBENC has been developed at BARC to simulate the natural circulation characteristics in closed loops. The salient features of the code include ability to handle non-uniform diameter components, axial thermal conduction in fluid and heat losses from the piping to the environment. This paper deals with the experimental studies carried out in the loop. Detailed validation of the LeBENC code with the experimental data is also discussed in the paper.     

Database Security for the Web

Securing databases requires IS managers to have the utmost attention paid to all kinds of breaches of security, within and outside the organizations. Dynamic page generation and cookies are two of the newer issues that cause IS managers to be forever open to new ways of solving security problems.     

Pretest in forced circulation molten salt heat transfer loop: Studies with thermia‐B

Molten salts have potential application as an efficient heat transfer medium in a primary and secondary heat exchanger in high temperature next‐generation nuclear power plant. Thermal hydraulic studies are vital for reliable and cost‐effective design of the nuclear power plant. Therefore heat transfer study of molten salts will play a vital role in this area. In this work, an experimental system was designed to study thermal hydraulics of the molten salt system up to 700°C. This work describes the pretest results of the experimental facility for extremely corrosive molten fluoride salts with a simulant thermia‐B as the working fluid. In the present work, the details of the system are discussed and thermal‐hydraulic data for heat transfer fluid thermia‐B has been presented. Experiments were carried out at Reynolds number in the range of 4500 to 40 500 and Prandtl number in the range of 34 to 144. Effect of Reynolds number, melting tank temperature, and heat input to test section on forced convective heat transfer was studied under turbulent conditions. Comparison of the experimental data with different empirical correlations has been presented.     

Choice of sink for air conditioning systems. Part 2

The technical superiority of water-cooled air conditioning systems for different applications in terms of overall power rating have been established by the authors in an earlier publication. This paper deals with the generalized approach for evaluating the techno-economic choice of sink for an air conditioning system. A single parameter of unit cooling cost in fils/kWh_c (100 fils = 1 Kuwaiti dinar = US$3.25), combining the system's technical performance and economic aspects, is an effective cost-benefit criterion for making the choice for the type of sink. The results of an analysis, applied to example case studies in Kuwait, favour the water-cooled system for both the direct expansion (mostly used in the residential sector) and the chilled water (commonly used for non-residential applications) air conditioning systems.     

Generalized Filter Topology Using Grounded Components and Single Novel Active Element

This paper introduces a new active element combining the useful features of differential voltage, dual-X and first generation current conveyors. The new proposed active element is further utilized to introduce a new generalized filter topology employing grounded components only. The proposed single active element-based topology benefits from first-order and second-order filter realization by appropriate impedance specialization. The circuit topology with single current input provides two output currents and voltages in each case. A thorough study of proposed active element along with extensive simulations is carried out to validate the filter topology. A detailed non-ideal study is also given. To further support the usefulness of filter topology, higher-order filters are also realized. The new active element and the new filter structure provide advancement to the existing knowledge; with the scope of active element being further exploited for analog signal processing applications in general. The proposed differential voltage dual-X first generation current conveyor (DV-DXCCI) and its filtering applications are simulated using TSMC 0.25  \(\upmu \) m technology.     

A new nonlinear directional overcurrent relay coordination technique, and banes and boons of near-end faults based approach

Considerations of weight factors and far-end faults in the directional overcurrent relay coordination problem formulation do not affect the optimal solution. This paper investigates this viewpoint and verifies that indeed by such an approach the optimality is not lost. But, this study reveals that in doing so, the coordination quality is sacrificed to some extent. It is also observed that if all remaining valid constraints (after relaxing few constraints based on the back-up coordination philosophy and strength of fault level generated) are considered and if the objective function is changed to running sum of all violating constraints, all valid considered constraints are satisfied. This study is done by simultaneously optimizing all settings in nonlinear environment by Sequential Quadratic Programming method using Matlab Toolbox. The results of the analysis on a sample 6-bus and IEEE 30-bus systems are presented in this paper.     

A Dynamic Dictionary for Priced Information with Application

In this paper we design a dynamic dictionary for the priced information model initiated by Charikar et al. Assume that a set S consisting of n elements is given such that each element has an associated price, a positive real number. The cost of performing an operation on elements of S is a function of their prices. The cost of an algorithm is the sum of the costs of all operations it performs. The objective is to design algorithms which incur low cost. In this model we propose a dynamic dictionary, supporting search, insert and delete, for keys drawn from a linearly ordered set. As an application we show that the dictionary can be used in computing the trapezoidal map of a set of line segments, a fundamental problem in computational geometry.