Particulate matter emitted from ultrasonic humidifiers—Chemical composition and implication to indoor air

Household humidification is widely practiced to combat dry indoor air. While the benefits of household humidification are widely perceived, its implications to the indoor air have not been critically appraised. In particular, ultrasonic humidifiers are known to generate fine particulate matter (PM). In this study, we first conducted laboratory experiments to investigate the size, quantity, and chemical composition of PM generated by an ultrasonic humidifier. The mass of PM generated showed a correlation with the total alkalinity of charge water, suggesting that CaCO₃ is likely making a major contribution to PM. Ion chromatography analysis revealed a large amount of SO₄²⁻ in PM, representing a previously unrecognized indoor source. Preliminary results of organic compounds being present in humidifier PM are also presented. A whole-house experiment was further conducted at an actual residential house, with five low-cost sensors (AirBeam) monitoring PM in real time. Operation of a single ultrasonic humidifier resulted in PM_2.5 concentrations up to hundreds of μg m⁻³, and its influence extended across the entire household. The transport and loss of PM_2.5 depended on the rate of air circulation and ventilation. This study emphasizes the need to further investigate the impact of humidifier operation, both on human health and on the indoor atmospheric chemistry, for example, partitioning of acidic and basic compounds.     

Chromatographic characterisation of aptamer-modified poly(EDMA-co-GMA) monolithic disk format for protein binding and separation

The introduction of aptameric ligands onto disk-monolithic adsorbent, representing a unique strategy for convective isolation of target molecules with high specificity and selectivity, is investigated for the first time. Experimental results showed that the disk monolith possessed a good permeability of 1.67 ± 0.05 × 10^–14 m² (RSD = 3.2%). The aptameric ligand density for the aptamer-modified disk monolith was 480 pmol/uL. Chromatographic analysis of the aptamer disk-monolith efficiency showed an optimum linear velocity of 126 cm/min (≈0.25 mL/min) at room temperatures 25 ± 2°C. The theoretical number of plates corresponding to the optimum linear velocity was 128.2 with an height equivalent to the theoretical plate of 0.022 mm. The disk aptamer-immobilised monolithic system demonstrated good selectivity and isolation of thrombin from non-targets.     

Framing processes in planning disputes: analysing dynamics of contention in a housing project in Hong Kong

Opposition to planned housing projects can lead to considerable delays. Hong Kong is characterized by an executive-dominant planning system, whereby the government possesses strong planning powers, while elected district councillors play an advisory role only. Curiously, planning delays are fairly common. The above paradox is analysed in this paper through examining a major dispute over public housing development in Hong Kong. This dispute involved lengthy processes of bargaining, which were vulnerable to legitimacy challenges. Councillors acted strategically by tapping into prevailing social values to frame the legitimacy of bargaining processes. Despite discontent with these informal bargaining processes, the dispute has not evolved into more radical challenges to existing governance arrangements. The paper concludes by considering how hegemonic discourses of planning efficiency may have constrained the emergence of radical contention, which adds to broader debates about the conditions which shape the trajectories and transformative prospects of contentious urban developments.     

Incorporation of sugarcane bagasse in the development of high dietary fibre noodles

Sugarcane bagasse (SB) is one of the most abundant food wastes. In this research, SB was incorporated into the development of noodles at three different ratios, i.e. 5%, 10% and 15%. Total dietary fibre of noodles significantly increased from 3.39% (control noodles; – without SB) to 13.85% with 15% SB incorporation. All SB incorporated noodles (SBNs) were qualified to be labelled as ‘High in dietary fibre’. The 15% SBN had the highest fibre content and lowest dialyzable glucose, but the organoleptic properties were the lowest. Due to that, 5% SBN was deemed to be the most suitable ratio for noodles incorporation, as it had the closest value towards the commercial noodles in terms of colour, texture, fibre content and dialyzable glucose concentration of noodles samples. In terms of sensory evaluation, the 5% SBN had the highest overall acceptability, and the ratio was suitable for noodles development.     

Inelastic buckling of channel columns in the distortional mode

Thin-walled channel sections may buckle in a distortional mode when subjected to compression. A variety of cold-formed channel columns were tested recently to study distortional buckling in the inelastic range. This paper describes a comparison of a theoretical method for predicting the inelastic distortional buckling strengths of thin-walled columns with the column tests. The method is based on a spline finite strip buckling analysis which takes into account the non-linear stress-strain behaviour of the steel making up the test sections, and the fix-ended test conditions. The inelastic buckling analysis is found to produce accurate estimates of the test failure loads and failure modes     

A simplified procedure for determining indoor daylight illuminance using daylight coefficient concept

The first step in evaluating the visual performance and energy efficiency provided by daylight requires an accurate estimation of the amount of daylight entering a building. The actual daylight illuminance of a room is mainly influenced by the luminance levels and patterns of the sky in the direction of view of the window at that time. The daylight coefficient concept, which considers the changes in the luminance of the sky elements, offers a more effective way of computing indoor daylight illuminances. Recently, Kittler et al. have proposed a new range of 15 standard sky luminance distributions including the CIE (International Commission on Illumination) standard clear sky. Lately, these 15 sky luminance models have been adopted as the CIE Standard General Skies. This paper presents a graphical method to calculate interior illuminance for the CIE standard clear sky using the daylight coefficient approach. The simplified techniques in the form of a nomograph and Waldram diagram were established and described. The performance of the proposed approach was evaluated against the results obtained by an independent calculation approach and a computer simulation program. It was shown that the daylight illuminances estimated by our graphical tool were in reasonably good agreement with those produced from the other two methods. The findings provide building professionals and students a reliable and simple alternative that incorporates the daylight coefficient concept to estimate the interior daylight illuminance and assess daylighting performance.     

The effect of depositional history on contaminated bed sediment stability

Experiments were conducted in an annular flume using a commercially available kaolinite clay as well as contaminated bed sediment from Hamilton Harbour (Ontario) to assess their stability against erosion. Critical shear stress for erosion was measured under different conditions of bed formation (quiescently deposited beds and shear deposited beds) as well as with and without the presence of a biostabilized bed. Results suggest that a biostabilized bed and a bed formed under a flowing condition, similar to a river scenario, will be more resistant against erosion than will a non-biostabilized bed and a bed formed under quiescent conditions. Up to three cycles of erosion and flocculation/deposition were observed to occur within one experiment. These results suggest that the depositional history and biostabilization of river bed sediments need to be seriously considered within sediment and contaminant transport models if meaningful estimates of sediment and contaminant source, fate and effect are to be generated and used for the management of our aquatic ecosystems.     

Potential of tipping flush gate for sedimentation management in open stormwater sewer

This paper presents the design of a tipping flush gate and its potential use in servicing open storm sewers in terms of sedimentation management. The tipping flush gate was installed in a section of open concrete storm sewer located in a commercial area in Taman Pekaka, Nibong Tebal, Penang, Malaysia. Monitoring of the gate operation and performance was done from 14^th November 2012 to 15^th March 2013 covering the beginning and end of the wet season. The sediment profile inside the sewer was measured after each operation of the gate or rainfall event. Results showed that the gate was effective in reducing naturally accumulated sediment in the chosen sewer section. However, proper litter management is needed if the gate is to be implemented in open storm sewer systems. A design guideline for the usage of a tipping flush gate for open storm sewers is also presented in this paper.     

Quality assurance of Chinese herbal medicines: Procedure for multiple‐herb extraction

A quality assurance (QA) procedure for multiple‐herb extraction, which takes into account the existence of common chemical markers and multiple‐herb‐extraction effects, has been developed for producing Chinese herbal medicines (CHMs) of consistent quality. The experimental method for determining related correlation function of the multiple‐herb‐extraction effect was designed. A systematic solution strategy was also developed to appropriately decompose the multiple‐herb extraction system into several subsystems for obtaining solution(s) and determining the overall behavior of the system. An example of QA of Danshen–Gegen (DG) decoction was used to demonstrate the QA procedure. An H9c2 cell assay was used to test the efficacy of consistent quality DG decoctions prepared by different herb combinations with different material costs of herbs. It was observed that a multiple‐herb‐extraction effect was present in the aqueous extraction of Danshensu and this effect was depended on the extraction solvent. The possible mechanism of this multiple‐herb‐extraction effect in the aqueous DG extraction was speculated to be the change of initial pH value of the aqueous extraction solvent by an unknown component from Gegen. The experimental chemical marker concentrations fell within ±10% of the specified chemical marker compositions by using the amount of herb from each herb class as predicted by the QA model. Furthermore, an H9c2 cell assay was used to test the efficacy of three consistent quality DG extracts, which were produced by different herb combinations with different material costs of herbs. The results showed that the three DG extracts provided consistent biological efficacy against menadione‐induced toxicity. This study extended a recently developed QA procedure of single‐herb extraction to multiple‐herb extraction. It provides a solution of QA in extraction, which is one of the most important unresolved problems in the modernization of traditional Chinese medicines. With this modified model and the companion experiments, the amount of herbs needed from different quality classes to produce a multiple‐herb formula CHM product decoction with consistent quality can be exactly determined. © 2014 American Institute of Chemical Engineers AIChE J 60: 4014–4026, 2014     

Linear Aliphatic Dialkynes as Alternative Linkers for Double‐Click Stapling of p53‐Derived Peptides

We investigated linear aliphatic dialkynes as a new structural class of i,i+7 linkers for the double‐click stapling of p53‐based peptides. The optimal combination of azido amino acids and dialkynyl linker length for MDM2 binding was determined. In a direct comparison between aliphatic and aromatic staple scaffolds, the aliphatic staples resulted in superior binding to MDM2 in vitro and superior p53‐activating capability in cells when using a diazidopeptide derived from phage display. This work demonstrates that the nature of the staple scaffold is an important factor that can affect peptide bioactivity in cells.