Pre-Processing of Integral Images for 3-D Displays

This paper seeks to explore a method to accurately correct geometric distortions caused during the capture of three-dimensional (3-D) integral images. Such distortions are rotational and scaling errors which, if not corrected, will cause banding and moire effects on the replayed image. The method for calculating the angle of deviation in the 3-D Integral Images is based on Hough Transform. It allows detection of the angle necessary for correction of the rotational error. Experiments have been conducted on a number of 3-D integral image samples and it has been found that the proposed method produces results with accuracy of 0.05 deg     

Investigation of Heat‐Induced Degradation of Virgin Olive Oil Using Front Face Fluorescence Spectroscopy and Chemometric Analysis

A simple setup using a 365‐nm light‐emitting diode coupled to a USB spectrometer through an optical fiber, in a front‐face fluorescence configuration, was used to investigate the heat‐induced deterioration of virgin olive oil at different heating temperatures and times. The samples were heated for 30, 60, 120 and 180 min for every temperature setting of 140, 160 and 180 °C, respectively. Two important results are reported in this article. First, a neo‐formed compound around 665 nm due to the degradation of chlorophyll was observed. This new peak was attributed to pyropheophytins. The second result showed an important rise of the peak around 489 nm, which corresponded to the oxidation products. The correlation obtained between the peroxide value and the 489 nm peak using principal component analysis revealed the mechanism of the oxidation process. It further showed that the peak around 489 nm is a direct consequence of the degradation of hydroperoxide.     

Optimum design of cam-roller follower mechanism using a new evolutionary algorithm

Selection of tooling to perform specific operations like drilling and milling on ceramic materials using rotary ultrasonic machining process is an important aspect to meet stringent dimensions on workpiece as well as intended performance of tool. This phenomenon is more critical for micro rotary ultrasonic machining. In the present study, an effort was made to do micro drilling operation of Ø0.3 mm tool with varying geometry, having different wall thicknesses and abrasive grain sizes using design of experiments. The effect of tool-based parameters like grain size and wall thickness has been studied on axial cutting force, radial cutting force, tool wear, edge chipping area and taper. After examining axial and radial cutting forces, it has been concluded that lower wall thickness (80 μm) tool is good for drilling operation; and higher wall thickness (100 μm) tool is good for milling operation under same material removal rate conditions. It has been also investigated that lower wall thickness (80 μm) tool has less edge chipping area and less taper and can impart high drilling depth as compared to higher wall thickness (100 and 150 μm) tool. It is also concluded that lesser grain size (15 μm) tools are advantageous in terms of edge chipping area and cutting force for drilling and milling operations as compared to higher grain size (30, 35 and 45 μm) tool at constant material removal rate. Higher grain size tools have been broken at 1.13 mm³/h material removal rate conditions due to bad profile accuracy. But higher grain size tools have worked fairly well at less material removal rate condition. Higher grain size tools produced less wear. Tool wear was found minimum in higher wall thickness (100 μm) tool having higher abrasive grain size (30 μm). Using inferred results, Ø0.3 mm drilling experiments have been carried out on six aerospace ceramic materials. Also, groove of 0.5 mm size using Ø0.3 mm optimised tool has been successfully carried out in sintered SiC.     

The role of the experimental data base used to identify material parameters in predicting the cyclic plastic response of an austenitic steel

The first objective of this paper investigates the influence of the previous strain history on ratcheting. New tests were performed where different strain-controlled histories have been applied prior to ratcheting tests. It is demonstrated that under the same conditions, one can observe ratcheting, plastic shakedown or elasticity according to the prior strain-controlled history. The second objective points out the correlation between the experimental data base devoted to the identification of the material parameters and the quality of the predictions in cyclic plasticity. The results suggest that the choice of the tests should be closely linked to the capabilities of the model. In particular, the presence of non proportional strain-controlled tests in the data base may be not a good choice if the model itself is not able to represent explicitly such a character. All tests considered here were performed on 304L SS at room temperature.     

Reasoning from last conflict(s) in constraint programming

Constraint programming is a popular paradigm to deal with combinatorial problems in artificial intelligence. Backtracking algorithms, applied to constraint networks, are commonly used but suffer from thrashing, i.e. the fact of repeatedly exploring similar subtrees during search. An extensive literature has been devoted to prevent thrashing, often classified into look-ahead (constraint propagation and search heuristics) and look-back (intelligent backtracking and learning) approaches. In this paper, we present an original look-ahead approach that allows to guide backtrack search toward sources of conflicts and, as a side effect, to obtain a behavior similar to a backjumping technique. The principle is the following: after each conflict, the last assigned variable is selected in priority, so long as the constraint network cannot be made consistent. This allows us to find, following the current partial instantiation from the leaf to the root of the search tree, the culprit decision that prevents the last variable from being assigned. This way of reasoning can easily be grafted to many variations of backtracking algorithms and represents an original mechanism to reduce thrashing. Moreover, we show that this approach can be generalized so as to collect a (small) set of incompatible variables that are together responsible for the last conflict. Experiments over a wide range of benchmarks demonstrate the effectiveness of this approach in both constraint satisfaction and automated artificial intelligence planning.     

Municipal solid waste compost application improves productivity, polyphenol content, and antioxidant capacity of Mesembryanthemum edule

Organic wastes were successfully used as soil amendment to improve agrosystems productivity. Yet, the effectiveness of this practice to enhance plant antioxidant capacities has received little attention. Here, we assess the effect of municipal solid waste (MSW) compost (at 40 t ha(-1)) on growth, polyphenol contents and antioxidant activities of Mesembryanthemum edule. MSW compost application significantly increased the soil contents of carbon, nitrogen, calcium, phosphorus and potassium. This was associated with higher nutrient (N, P, and K) uptake, which likely led to the significant improvement of the plant biomass and relative growth rate (RGR) (+93% on average) as compared to the control. In the same way, the fertilizing effect of the added organic matter significantly enhanced the antioxidant potential M. edule, assessed by radical scavenging activity, iron reducing power and β-carotene bleaching capacity. This was associated with significantly higher antioxidant contents, mainly total phenols and flavonoids. Heavy metal (Pb, Cd, Cu, and Zn) concentrations were slightly increased upon compost application, but remained lower than phytotoxic values. Overall, our results point out that short-term MSW compost application at 40 t ha(-1) is efficient in enhancing the productivity together with the antioxidant potentiality of M. edule without any adverse environmental impact.     

Estimation for discrete Markov random fields observed in Gaussiannoise

A finite state Markov random field is observed in Gaussian noise. Changes of measures are defined under which all random variables of the signal are independent and uniformly distributed over the finite state space and all random variables of the observation are independent and N(0,1). The problem of estimating the most likely signal given the observations is treated in a related form by introducing probabilities over the possible signals     

Effect of vegetable and synthetic fibers on mechanical performance and durability of Metakaolin-based mortars

The use of vegetable fibers has regained interest in different fields. In fact, fibers may represent an alternative to traditional fibers incorporated in building materials, such as polypropylene fibers. Sustainable development requires the adoption of ecofriendly and natural materials. In this approach, using vegetable fibers as reinforcement for cementitious materials represents an interesting option for concrete industry. Thus, this article studies mechanical performances and transfer properties of cementitious mortars reinforced with vegetable fibers. The used fibers were Dis (DS), Alfa (AF), Date palm (DP) and Hemp (HE). They were subjected to prior treatment with calcium hydroxide. The results show that reinforced mortars with vegetable fibers represent a better deformation capacity than the control mortar without fibers; the best bending strength was recorded for hemp and date palm mortars; the addition of vegetable fibers leads to thermal conductivity decrease by 15% for a content of 0.1%. However, greater carbonation depths were recorded for vegetable fibers based mixes. These findings, for us, are promising for the use of vegetable fibers in cementitious materials.     

A CMOS adaptive RF front-end receiver for wireless applications

The performance of signal-processing algorithms implemented in hardware depends on the efficiency of datapath, memory speed and address computation. Pattern of data access in signal-processing applications is complex and it is desirable to execute the innermost loop of a kernel in a single-clock cycle. This necessitates the generation of typically three addresses per clock: two addresses for data sample/coefficient and one for the storage of processed data. Most of the Reconfigurable Processors, designed for multimedia, focus on mapping the multimedia applications written in a high-level language directly on to the reconfigurable fabric, implying the use of same datapath resources for kernel processing and address generation. This results in inconsistent and non-optimal use of finite datapath resources. Presence of a set of dedicated, efficient Address Generator Units (AGUs) helps in better utilisation of the datapath elements by using them only for kernel operations; and will certainly enhance the performance. This article focuses on the design and application-specific integrated circuit implementation of address generators for complex addressing modes required by multimedia signal-processing kernels. A novel algorithm and hardware for AGU is developed for accessing data and coefficients in a bit-reversed order for fast Fourier transform kernel spanning over log?₂ N stages, AGUs for zig-zag-ordered data access for entropy coding after Discrete Cosine Transform (DCT), convolution kernels with stored/streaming data, accessing data for motion estimation using the block-matching technique and other conventional addressing modes. When mapped to hardware, they scale linearly in gate complexity with increase in the size.