Engineering Silver-Enriched Copper Core-Shell Electrocatalysts to Enhance the Production of Ethylene and C2+ Chemicals from Carbon Dioxide at Low Cell Potentials

Copper catalysts are widely studied for the electroreduction of carbon dioxide (CO₂) to value-added hydrocarbon products. Controlling the surface composition of copper nanomaterials may provide the electronic and structural properties necessary for carbon-carbon coupling, thus increasing the Faradaic efficiency (FE) towards ethylene and other multi-carbon (C₂₊) products. Synthesis and catalytic study of silver-coated copper nanoparticles (Cu@Ag NPs) for the reduction of CO₂ are presented. Bimetallic CuAg NPs are typically difficult to produce due to the bulk immiscibility between these two metals. Slow injection of the silver precursor, concentrations of organic capping agents, and gas environment proved critical to control the size and metal distribution of the Cu@Ag NPs. The optimized Cu@Ag electrocatalyst exhibited a very low onset cell potential of −2.25 V for ethylene formation, reaching a FE towards C₂₊ products (FE_C2+) of 43% at −2.50 V, which is 1.0 V lower than a reference Cu catalyst to reach a similar FE_C2+. The high ethylene formation at low potentials is attributed to enhanced C C coupling on the Ag enriched shell of the Cu@Ag electrocatalysts. This study offers a new catalyst design towards increasing the efficiency for the electroreduction of CO₂ to value-added chemicals.     

Decreasing Filter Cake Resistance by Using Packing Structures

Packed beds used in absorption columns are evaluated to determine whether they can also be beneficial for cake‐forming filtrations. To assess this, model systems are characterized and separated by using a dead‐end filter cell. Filtrations are conducted with different packings; the filtrate amount over time and resulting turbidity are evaluated. Packings increase the filter cake resistance and the separation time of the cakes formed with approximately incompressible solids. However, they exhibit a positive effect on the filtration of a more complex, compressible substance; the process is not only accelerated, but also the quality of the obtained filtrate is not compromised. These results demonstrate potential in the use of packed beds for the filtration of complex biogenic suspensions.     

Supramolecular Assembly of Aminoethylene‐Lipopeptide PMO Conjugates into RNA Splice‐Switching Nanomicelles

Phosphorodiamidate morpholino oligomers (PMOs) are oligonucleotide analogs that can be used for therapeutic modulation of pre‐mRNA splicing. Similar to other classes of nucleic acid‐based therapeutics, PMOs require delivery systems for efficient transport to the intracellular target sites. Here, artificial peptides based on the oligo(ethylenamino) acid succinyl‐tetraethylenpentamine (Stp), hydrophobic modifications, and an azide group are presented, which are used for strain‐promoted azide‐alkyne cycloaddition conjugation with splice‐switching PMOs. By systematically varying the lead structure and formulation, it is determined that the type of contained fatty acid and supramolecular assembly have a critical impact on the delivery efficacy. A compound containing linolenic acid with three cis double bonds exhibits the highest splice‐switching activity and significantly increases functional protein expression in pLuc/705 reporter cells in vitro and after local administration in vivo. Structural and mechanistic studies reveal that the lipopeptide PMO conjugates form nanoparticles, which accelerate cellular uptake and that the content of unsaturated fatty acids enhances endosomal escape. In an in vitro Duchenne muscular dystrophy exon skipping model using H2K‐mdx52 dystrophic skeletal myotubes, the highly potent PMO conjugates mediate significant splice‐switching at very low nanomolar concentrations. The presented aminoethylene‐lipopeptides are thus a promising platform for the generation of PMO‐therapeutics with a favorable activity/toxicity profile.     

Parameter Estimation for Incompressible Cake Filtration: Advantages of a Modified Fitting Method

There is a widely used linear strategy to determine the parameters specific cake resistance and filter medium resistance in incompressible cake filtration. In this article, it is intended to demonstrate that this strategy has some disadvantages and should be replaced by an alternative nonlinear approach which yields more exact results. Even though the gains in precision are small for most cases, the nonlinear strategy is favored because it involves no extra effort and is grounded in the same physical theory as the original approach. This claim is based on a broad simulation study using noisy data with known parameter values to compare both fitting strategies and judge their accuracies.     

Concept for a Hydrometallurgical Processing of a Copper-Cobalt-Nickel Alloy Made from Manganese Nodules

The processing of manganese nodules for the production of raw materials has been a subject of research for many decades. The nodules contain many valuable metals like copper, cobalt and nickel. In recent years, the German Federal Institute for Geoscience and Natural Resources developed a process for the processing of manganese nodules based on a combined pyro- and a hydrometallurgical route. Clausthal University of Technology was assigned to develop the hydrometallurgical process for the treatment of a FeNiCuCo alloy. The developed process consists of pressurized sulfuric acid leaching with the suppression of hydrogen gas formation, precipitation and solvent extraction.     

Encapsulation of protein hydrolysates by spray drying: feasibility of using buffalo whey proteins

This work aimed to produce and encapsulate protein hydrolysates of buffalo origin using spray drying with gum arabic and maltodextrin as encapsulating agents. The following core ratios were applied: encapsulating agent in the ratios of 1:10 and 1:15, with 50% gum arabic and 50% maltodextrin (50:50), and 70% gum arabic and 30% maltodextrin (70:30). The encapsulated particles were between 2.0 and 20.0 μm. The encapsulation efficiency of the samples was above 95% at the initial time. After 45 days of storage, encapsulation efficiency decreased to values below 60%. The 70:30 samples showed a significant decrease (P < 0.05) in hygroscopicity, moisture and water activity compared with free hydrolysates. The encapsulation process increased the values of oil retention, emulsifying activity and solubility of whey protein hydrolysates for all proportions evaluated, both at the initial time and after 45 days of storage. The branched-chain amino acid concentration was higher in samples encapsulated at the 1:10 ratio. The spray drying encapsulation of buffalo protein hydrolysates with suitable encapsulating agents improves the techno-functional characteristics of these hydrolysates, hence expanding their use in different food matrices and enabling the use of buffalo cheese whey.     

Bestandsaufnahme Grundwasser nach der EU-Wasserrahmenrichtlinie im Koordinierungsraum Mulde-Elbe-Schwarze Elster

Die Wasserrahmenrichtlinie regelt den Schutz von Grund- und Oberflächengewässern und fordert eine nachhaltige Wassernutzung. Sie legt einen Zeitplan fest, um bis zum Jahr 2015 für alle Gewässer einen guten Zustand zu erreichen. Der erste Schritt ist eine Bestandsaufnahme der Gewässer. Für das Grundwasser besteht diese aus einer erstmaligen Beschreibung, einer weitergehenden Beschreibung und der Prüfung der Auswirkungen menschlicher Tätigkeit auf das Grundwasser. Die Wasserrahmenrichtlinie wird unabhängig von administrativen Grenzen innerhalb von hydrologischen Einzugsgebieten umgesetzt. Im deutschen Teil des Flusseinzugsgebietes der Elbe wurden 5 Koordinierungsräume gegründet. Der Koordinierungsraum Mulde-Elbe-Schwarze Elster (MES) wird vorgestellt. Beispielhaft für die angewandten Methoden wird die Beurteilung diffuser Stoffeinträge in das Grundwasser bei der erstmaligen Beschreibung erläutert. Die Ergebnisse der Bestandsaufnahme Grundwasser im Koordinierungsraum MES werden präsentiert. Von 54 Grundwasserkörpern ist für 25 Körper aufgrund der Belastungen durch Punktquellen und diffuse Quellen, wegen des mengenmäßigen Zustands oder sonstiger anthropogener Einwirkungen die Zielerreichung nach der Wasserrahmenrichtlinie unklar/unwahrscheinlich.     

Functionally Graded Ceramics Fabricated with Side‐by‐Side Tape Casting for Use in Magnetic Refrigeration

Functionally graded ceramic tapes have been fabricated by a side‐by‐side tape casting technique. This study shows the possibility and describes the main principles of adjacent coflow of slurries resulting in formation of thin plates of graded ceramic material. Results showed that the small variations of solvent and binder system concentrations have a substantial effect on slurry viscosity. Varying these parameters showed that side‐by‐side tape casting with a well‐defined interface area is possible for slurries with viscosities above 3500 mPa s at a casting shear rate of 3.3 s^?1. As it was expected, the choice of de‐bindering and sintering regimes significantly influences crack formation, and a three‐step heating programme was found to result in tapes of the highest quality. The interface regions of green graded tapes were investigated structurally by scanning electron microscopy; for a distinct identification of the interface region and analysing the degree of cross‐interface diffusion, the isothermal entropy change was measured by a vibrating sample magnetometer as the magnetic transition temperature (Curie temperature) is very sensitive to the dopant level in ceramics. Also the purpose of developing this graded ceramic tape casting was applications of these specific magnetocaloric properties within the magnetic refrigeration technology.