Recycling of multilayer packaging using a reversible cross-linking adhesive

Plastic-based multilayer packaging has an important function on the packaging market, but is currently not recyclable as the polymer layers used are usually thermodynamically immiscible. This work therefore follows the approach to prepare separable multilayer packaging using a packaging adhesive modified with thermally unstable adducts, and proposes a corresponding recycling process. For this purpose, typical multilayer structures (polyethylene (PE)// polyethylene terephtalate (PET), PET//aluminum, and PE//aluminum) were prepared by curing furan-/maleimide-functionalized polyurethane (PU)-prepolymers with a three-functional cross-linking agent. Adhesions of up to over 3N per 15 mm test specimen were measured or substrate failures of PET films were observed. However, heating in dimethylsulfoxide, the retro-Diels–Alder reaction takes place and the cross-linked adhesive turns thermoplastic and dissolves in the solvent. Thus, the laminate separates and the pure PE, PET, and aluminum foils can be recovered without any PU residue.     

The Fifth WS/DGAT Enzyme of the Bacterium Marinobacter aquaeolei VT8

Wax esters (WE) belong to the class of neutral lipids. They are formed by an esterification of a fatty alcohol and an activated fatty acid. Dependent on the chain length and desaturation degree of the fatty acid and the fatty alcohol moiety, WE can have diverse physicochemical properties. WE derived from monounsaturated long-chain acyl moieties are of industrial interest due to their very good lubrication properties. Whereas WE were obtained in the past from spermaceti organs of the sperm whale, industrial WE are nowadays mostly produced chemically from fossil fuels. In order to produce WE more sustainably, attempts to produce industrial WE in transgenic plants are steadily increasing. To achieve this, different combinations of WE producing enzymes are expressed in developing Arabidopsis thaliana or Camelina sativa seeds. Here we report the identification and characterization of a fifth wax synthase from the organism Marinobacter aquaeolei VT8, MaWSD5. It belongs to the class of bifunctional wax synthase/acyl-CoA:diacylglycerol O-acyltransferases (WSD). The protein was purified to homogeneity. In vivo and in vitro substrate analyses revealed that MaWSD5 is able to synthesize WE but no triacylglycerols. The protein produces WE from saturated and monounsaturated mid- and long-chain substrates. Arabidopsis thaliana seeds expressing a fatty acid reductase from Marinobacter aquaeolei VT8 and MaWSD5 produce WE. Main WE synthesized are 20:1/18:1 and 20:1/20:1. This makes MaWSD5 a suitable candidate for industrial WE production in planta.     

Role Models for Radical Innovations in Times of Open Innovation

In this paper, we study the influence of innovator roles in highly innovative ventures. In order to obtain a differentiated picture we take into account the degree of innovativeness as a moderating variable. To test our hypotheses we use a sample of 146 highly innovative new product development projects. We choose a rigorous sampling design and apply state‐of‐the‐art measures for the degree of innovativeness. Furthermore, we apply multi‐trait‐multi‐method methodology (MTMM) to enhance the validity of our study. The results show that innovator roles have a strong influence on innovation success but these influences are positively and negatively moderated by innovativeness. The moderating influences depend on the type of innovativeness. Remarkably, with increasing technological innovativeness innovator roles which create inter‐organizational links with the outside world appear to be more important than intra‐organizational linker roles, and support from high‐ranked organizational members turns out to have a significant negative effect on project success with higher degrees of technological innovativeness. Possible explanations for these findings are discussed and consequences for innovation research and innovation management are shown.     

Plumbagin,a Biomolecule with (Anti)Osteoclastic Properties

Plumbagin is a plant-derived naphthoquinone that is widely used in traditional Asian medicine due to its anti-inflammatory and anti-microbial properties. Additionally, plumbagin is cytotoxic for cancer cells due to its ability to trigger reactive oxygen species (ROS) formation and subsequent apoptosis. Since it was reported that plumbagin may inhibit the differentiation of bone resorbing osteoclasts in cancer-related models, we wanted to elucidate whether plumbagin interferes with cytokine-induced osteoclastogenesis. Using C57BL/6 mice, we unexpectedly found that plumbagin treatment enhanced osteoclast formation and that this effect was most pronounced when cells were pre-treated for 24 h with plumbagin before subsequent M-CSF/RANKL stimulation. Plumbagin caused a fast induction of NFATc1 signalling and mTOR-dependent activation of p70S6 kinase which resulted in the initiation of protein translation. In line with this finding, we observed an increase in RANK surface expression after Plumbagin stimulation that enhanced the responsiveness for subsequent RANKL treatment. However, in Balb/c mice and Balb/c-derived RAW264.7 macrophages, these findings could not be corroborated and osteoclastogenesis was inhibited. Our results suggest that the effects of plumbagin depend on the model system used and can therefore either trigger or inhibit osteoclast formation.     

Characterization and tests of planar Co3O4 model catalysts prepared by chemical vapor deposition

The chemical vapor deposition method was used to deposit thin films of cobalt oxide starting with cobalt (II) acetylacetonate and oxygen. The deposition process was investigated and the obtained films were identified as a cubic spinel-type polycrystalline Co₃O₄ with a crystallite size of 30–40 nm. The coating was carbon-free and the surface oxygen concentration was measured to be 66 at.% with AES analysis. Smooth and highly uniform thin films were deposited on planar stainless steel substrates and subjected to TPR and catalysis tests that show positive correlation. The apparent activation energy of Co₃O₄ reduction to CoO was measured to be (33±5) kJ/mol. The catalytic activity of Co₃O₄ was investigated toward the conversion of both propane and ethanol to carbon dioxide. Though the catalytic action was registered at the same temperature, the deactivation process was seen to be different. The catalytic conversion of ethanol induces a fast deactivation process, which was linked to its high ability to reduce Co₃O₄.     

Characterisation of the adsorption sites of hydrogen on Pt/C fuel cell catalysts

A key component of a hydrogen fuel cell is a catalyst to dissociate dihydrogen to hydrogen atoms. In the present study, the adsorption of hydrogen on Pt/C fuel cell catalysts has been investigated by inelastic neutron scattering spectroscopy.

Monitoring a clean Pt(50%)/C catalyst with low energy neutron spectroscopy, after exposure to dihydrogen at 20 K, as it was heated to room temperature, showed three distinct temperature regimes: (i) a decrease in intensity from 10 to 60 K, (ii) a rise to a maximum between 60 and 120 K and then (iii) a slow fall-off towards room temperature. We assign the three regions as: (i) desorption of physisorbed dihydrogen, (ii) dissociation of dihydrogen to give an adsorbed layer and (iii) damping of the response by an increasing Debye–Waller factor.

The vibrational INS spectra of a series of Pt/C catalysts prepared under varying conditions were similar indicating that the same types of site are common to all the catalysts, although the relative proportions of each site are sample dependent. Features at 520, 950 and part of the intensity at 1300 cm⁻¹ are assigned to hydrogen on (1 1 1) faces, in good agreement with single crystal data. The mode at 640 cm⁻¹ is assigned as the doubly degenerate asymmetric stretch of Pt(1 0 0) faces with the symmetric stretch near 550 cm⁻¹.

We assign the bending mode of the on-top site to the feature at 470 cm⁻¹. The Pt–H stretch mode was observed at 2079 cm⁻¹. This is a significant result: this is the first time that hydrogen on the on-top sites has been observed on nanosized platinum particles supported on high surface area carbon black. The width of the INS peak is surprisingly large and may give additional information on the type and relative proportions of the crystallographic faces present on the catalyst particles.     

Ärztliche Verantwortung gegenüber Palliativpatienten unter dem neuen Paradigma der Kundenorientierung

Definition of the problem

Establishing a good physician–patient relationship based on mutual trust and professional responsibility is a central element in physicians’ professionalism. Recently, however, there has been considerable debate in the field of medical ethics regarding trends toward an economic approach to medicine, which could potentially undermine healthy doctor–patient relationships. Part of this economic approach to medicine involves viewing the patient as an autonomous customer. But what does the customer role mean for vulnerable patients who are restricted in their autonomy and what effect does it have on the physician–patient relationship?

Arguments

In the following article, we pursue the question whether the physicians’ responsibility and the physician–patient relationship change when the (vulnerable) patient attributes the customer role to him-/herself. The study was conducted within the field of palliative care because terminally ill patients represent an especially vulnerable patient population. We base our argumentation in this article on the results of a qualitative interview study that investigated terminally ill patients’ attitudes regarding the topic “the patient as customer” as well as autonomy and decision-making.

Conclusion

The interview results show that autonomy must be understood in relational terms; furthermore, the analysis of the interviews indicates that the physician plays a crucial role in enabling the patient’s autonomy, regardless of whether patients view themselves as a patient or a customer. Subsequently, we deliberate whether the patients’ statements point to potential changes in the doctor–patient relationship and physicians’ responsibility towards patients. Based on these findings, practical implications for the doctor–patient relationship are considered in regard to the “Ethics of Care”, emphasizing the need for an individualized approach to working with patients, especially those with particularly vulnerable conditions.     

Zum Verbesserungspotenzial schriftlicher Aufklärungsmaterialien zu (bio)medizinischen Forschungsvorhaben – Empirische Analyse von Antragsunterlagen einer Forschungsethikkommission

Background

One of the elementary prerequisites for medical research on and with humans is the patients’ or probands’ informed consent. To ensure informed consent, study participants must be—among other things—provided with high-quality information. We developed criteria to assess and evaluate the quality of various written patient information material.

Methods

Based on a catalogue addressing 117 single criteria, we assessed the quality of 128 randomly selected documents from study proposals submitted to the ethical committee of Luebeck University in 2006. Each criterion refers to one of six quality areas (such as “readability and comprehensibility” or “potential benefit and harm”).

Results

The documents on average satisfied half of the criteria with a range from 20–76% for single items. The area with the highest quality score was “consent form” (64%), while “potential benefit and harm” (35%) was the lowest. Material from drug trials showed a significantly higher quality than that from other study types. Only 21 out of 117 criteria were met in more than 80% of all relevant documents.

Conclusion

The study provides evidence for significant deficits in the information material from basic and clinical research projects presented to one academic research ethics committee. Researchers need support in developing and writing informed consent documents. Our set of criteria could be used to make them more sensitive to the various demands involved.