Performance of the PAC optical packet network

For multiuser packet communications with unpredictable user demands (e.g., in a local or metropolitan area network), coordination and control of access to the frequency-division multiplexing (FDM) channels are difficult. B. Glance (J. Lightwave Technol., vol.10, pp.1323-1328, Sep 1992) proposed using a simple protection-against-collision (PAC) circuit to solve this media access problem and achieve full optical connectivity. The PAC system has the potential to interconnect hundreds of ports, each transmitting at several gigabits per second. Performance aspects of the PAC optical packet network are discussed here. The delay-throughout performance of this network is analyzed for uniform traffic patterns. The results show that in geographically distributed applications the maximum achievable throughput (normalized to the transmission rate) is typically between 0.4 and 0.5 per channel. In a centralized switch the (normalized) maximum achievable throughput can approach 0.8 per channel     

Adenosine Receptor Agonist HE-NECA Enhances Antithrombotic Activities of Cangrelor and Prasugrel in vivo by Decreasing of Fibrinogen Density in Thrombus

Blood platelets’ adenosine receptors (AR) are considered to be a new target for the anti-platelet therapy. This idea is based on in vitro studies which show that signaling mediated by these receptors leads to a decreased platelet response to activating stimuli. In vivo evidence for the antithrombotic activity of AR agonists published to date were limited, however, to the usage of relatively high doses given in bolus. The present study was aimed at verifying if these substances used in lower doses in combination with inhibitors of P2Y₁₂ could serve as components of dual anti-platelet therapy. We have found that a selective A_2A agonist 2-hexynyl-5’-N-ethylcarboxamidoadenosine (HE-NECA) improved the anti-thrombotic properties of either cangrelor or prasugrel in the model of ferric chloride-induced experimental thrombosis in mice. Importantly, HE-NECA was effective not only when applied in bolus as other AR agonists in the up-to-date published studies, but also when given chronically. In vitro thrombus formation under flow conditions revealed that HE-NECA enhanced the ability of P2Y₁₂ inhibitors to decrease fibrinogen content in thrombi, possibly resulting in their lower stability. Adenosine receptor agonists possess a certain hypotensive effect and an ability to increase the blood–brain barrier permeability. Therefore, the effects of anti-thrombotic doses of HE-NECA on blood pressure and the blood–brain barrier permeability in mice were tested. HE-NECA applied in bolus caused a significant hypotension in mice, but the effect was much lower when the substance was given in doses corresponding to that obtained by chronic administration. At the same time, no significant effect of HE-NECA was observed on the blood–brain barrier. We conclude that chronic administration of the A_2A agonist can be considered a potential component of a dual antithrombotic therapy. However, due to the hypotensive effect of the substances, dosage and administration must be elaborated to minimize the side-effects. The total number of animals used in the experiments was 146.     

The Co-Culture of Staphylococcal Biofilm and Fibroblast Cell Line: The Correlation of Biological Phenomena with Metabolic NMR1 Footprint

Staphylococcus aureus is one of the most prevalent pathogens associated with several types of biofilm-based infections, including infections of chronic wounds. Mature staphylococcal biofilm is extremely hard to eradicate from a wound and displays a high tendency to induce recurring infections. Therefore, in the present study, we aimed to investigate in vitro the interaction between S. aureus biofilm and fibroblast cells searching for metabolites that could be considered as potential biomarkers of critical colonization and infection. Utilizing advanced microscopy and microbiological methods to examine biofilm formation and the staphylococcal infection process, we were able to distinguish 4 phases of biofilm development. The analysis of staphylococcal biofilm influence on the viability of fibroblasts allowed us to pinpoint the moment of critical colonization—12 h post contamination. Based on the obtained model we performed a metabolomics analysis by ¹H NMR spectroscopy to provide new insights into the pathophysiology of infection. We identified a set of metabolites related to the switch to anaerobic metabolism that was characteristic for staphylococcal biofilm co-cultured with fibroblast cells. The data presented in this study may be thus considered a noteworthy but preliminary step in the direction of developing a new, NMR-based tool for rapid diagnosing of infection in a chronic wound.     

New aspects in cationization of lignocellulose materials. IX. Flame retardancy effect of modification with nitrogen and sulfur containing groups

Lignocellulose materials were modified with 3-chlor-2-hydroxypropyltrimethylammoniumchloride, 1,3-bis(3-chlor-2-hydroxypropyl)imidazoliumhydrogensulphate, and 2-chlorethyl-sodiumsulphonate and the flame-retardant properties of materials obtained were studied. The flame-retardant effect was proved using the limited oxygen index (LOI) method and values up to 32.8 vol % of oxygen were determined. The LOI values were higher when the modification was done without using NaOH for activation, but in that case the alkylating groups were not chemically bonded to the material. The NaOH activation was necessary to obtain material with flame-retardant properties stable against washing. No synergistic effects were observed when the material was modified with both nitrogen- and sulfur-containing groups.     

Influence of anionic form on thermooxidation of TMAHP–cellulose

With the help of DTA, DTG elementary analysis of carbonized residues and ESR spectroscopy the influence of anionic form on thermooxidation of trimethylammoniumhydroxyprophyl (TMAHP)–cellulose was studied. At 300°C the percentage of carbon in carbonized residue thermolyzed in oxidative atmosphere is higher than for the sample degraded in inert atmosphere. The percentage of hydrogen decreases simultaneously. The concentration of free radicals in thermolyzed residue also increases due to the presence of oxygen. We propose that oxygen is abstracting the hydrogen atoms from polysaccharide and unpaired electrons on carbon atoms are produced. At 400°C the percentage of carbon in residues prepared at inert atmosphere is higher than for residue formed at oxidative atmosphere. Also the concentration of free radicals in thermolyzed residues obtained in inert atmosphere is greater than for those from oxidative ones. That is why suppose that at this temperature oxygen is bonded to polysaccharide residue and free radicals are terminated. From the semiquantitative DTA we can make the following sequence of samples according to their increasing thermooxidative effect: unmodified cellulose < A–HSO < A–Br^? < A–I^? < A–NO < A–H₂PO < A–CH₃COO^? < A–HCO < A–F^? < A–Cl^?1 < A–OH^p?.     

3D resistive RAM cell design for high-density storage class memory—a review

In this article, we comprehensively review recent progress in the ReRAM cell technology for 3D integration focusing on a material/device level. First we briefly mention pioneering work on high-density crossbar ReRAM arrays which paved the way to 3D integration. We discuss the two main proposed 3D integration schemes—3D horizontally stacked ReRAM vs 3D Vertical ReRAM and their respective advantages and disadvantages. We follow with the detailed memory cell design on important work in both areas, utilizing either filamentary or interface-limited switching mechanisms. We also discuss our own contributions on HfO₂-based filamentary 3D Vertical ReRAM as well as TaO_x/TiO₂ bilayer-based self-rectifying 3D Vertical ReRAM. Finally, we summarize the present status and provide an outlook for the nearterm future.     

High-Resolution and Stable Ruddlesden–Popper Quasi-2D Perovskite Flexible Photodetectors Arrays for Potential Applications as Optical Image Sensor

The development of an efficient fabrication route to achieve high-resolution perovskite pixel array is key for large-scale flexible image sensor devices. Herein, a high-resolution and stable 10 × 10 flexible PDs array based on formamidinium(FA⁺) and phenylmethylammonium (PMA⁺) quasi-2D (PMA)₂FAPb₂I₇ (n = 2) perovskite is demonstrated by developing SiO₂-assisted hydrophobic and hydrophilic treatment process on polyethylene terephthalate substrate. By introducing Au nanoparticles (Au NPs),  the perovskite film quality is improved and grain boundaries are reduced. The mechanism by which Au NPs upgrade the photoelectric quality of perovskite is mainly revealed by glow discharge-optical emission spectroscopy (GD-OES) and grazing-incidence wide-angle X-ray scattering (GIWAXS). To further improve the photoelectric performance of the devices, a post-treatment strategy with formamidinium chloride (FACl) is used . The optimized flexible PDs arrays show excellent optoelectronic properties with a high responsivity of 4.7 A W⁻¹, a detectivity of 6.3 × 10¹² Jones, and a broad spectral sensitivity. The device also exhibits excellent electrical stability even under severe bending and excellent flexural strength, as well as excellent environmental stability. Finally, the integrated flexible PDs arrays are used as sensor pixels in an imaging system to obtain high-resolution imaging patterns, demonstrating the imaging capability of the PDs arrays.     

Protected subspaces in quantum information

In certain situations the state of a quantum system, after transmission through a quantum channel, can be perfectly restored. This can be done by “coding” the state space of the system before transmission into a “protected” part of a larger state space, and by applying a proper “decoding” map afterwards. By a version of the Heisenberg Principle, which we prove, such a protected space must be “dark” in the sense that no information leaks out during the transmission. We explain the role of the Knill–Laflamme condition in relation to protection and darkness, and we analyze several degrees of protection, whether related to error correction, or to state restauration after a measurement. Recent results on higher rank numerical ranges of operators are used to construct examples. In particular, dark spaces are constructed for any map of rank 2, for a biased permutations channel and for certain separable maps acting on multipartite systems. Furthermore, error correction subspaces are provided for a class of tri-unitary noise models.     

Low temperature co-fired ceramic (LTCC)-based biosensor for continuous glucose monitoring

This article presents design, fabrication and testing of a miniature ceramic-based biosensor which is destined for continuous glucose monitoring. It is fabricated using well known LTCC (low temperature co-fired ceramics) technology. The biosensor consists of a microreaction chamber, three thick-film electrodes and a microdialysis tube. The detection process is based on oxidation of glucose by molecular oxygen in the presence of enzyme - glucose oxidase, GOx. One of the reaction products is a hydrogen peroxide which is detected amperometrically during its oxidation at a working electrode. Computational fluid dynamics (CFD) analysis was used for optimization of the biosensor geometry and considerations of the influence of operating conditions (flow rate) on mass transfer (diffusion) of the glucose within the microreaction chamber. Tests of the developed LTCC-based biosensor indicate its linear response to glucose concentration up to 9 mM with a relatively high sensitivity of about 147 nA/mM. Moreover, the properties of the presented ceramic biosensor are compared with properties of a similar device made in silicon/glass and in Perspex^®.