Batch Tests for Optimisation of Solvent Composition and Process Flexibility of the CHALMEX FS-13 Process

ABSTRACT

Studies have been performed with the purpose of determining the optimal solvent composition of a Chalmers grouped actinide extraction (CHALMEX) solvent for the selective co-extraction of transuranic elements in a novel Grouped ActiNide EXtraction (GANEX) process. The solvent is composed of 6,6’-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-benzo-[1,2,4]-triazin-3-yl)-[2,2’]-bipyridine (CyMe₄-BTBP) and tri-n-butyl phosphate (TBP) in phenyl trifluoromethyl sulfone (FS-13). The performance of the system has been shown to significantly depend on the ratios of the two extracting agents and the diluent to one another. Furthermore, the performance of the determined optimal solvent (10 mM CyMe₄-BTBP in 30% v/v TBP and 70% v/v FS-13) on various simulated PUREX raffinate solutions was tested. It was found that the solvent extracts all transuranic elements with high efficiency and good selectivity with regard to most other elements (fission products/activation products) present in the simulated PUREX raffinate solutions. Moreover, the solvent was found to extract a significant amount of acid. Palladium, silver, and cadmium were co-extracted along with the TRU-radionuclides, which has also been observed in other similar CHALMEX systems. The extraction of plutonium and uranium was preserved for all tested simulated PUREX raffinate solutions compared to experiments using trace amounts.     

Life time prediction of self-supporting flame-sprayed alumina-rich coatings

Main objective of the presented research is the life time prediction of self-supporting flame-sprayed Al₂O₃- and Al₂O₃ -ZrO₂ -TiO₂-materials under constant load. The characteristic life time and its scatter were derived from stable crack growth tests and Weibull-statistics including the four-point-bending and ball-on-three-balls method. The potential life time was estimated in order to assess room-temperature handling and long term storage of self-supporting flame-sprayed alumina components. In terms of flexural strength, energy release, and subcritical crack growth parameters, distinct differences between both materials were shown. In turn, the characteristic life times only barely deviated from each other. From that the conclusion was drawn that life time performance under constant load application is governed by the characteristic flame-spray microstructure. However, advantages in the flame-spray processing of Al₂O₃ - ZrO₂ -TiO₂ are still given, attributed to its lower melting temperature.     

On the Barzilai-Borwein basic scheme in FFT-based computational homogenization

Building upon the equivalence of the basic scheme in the work of Moulinec and Suquet with gradient descent methods, we investigate the effect of using the celebrated Barzilai-Borwein step size selection technique in this context. We provide an overview of recent convergence theory and present efficient implementations in the context of computational micromechanics, with and without globalization. In contrast to polarization schemes and fast gradient methods, no lower bound on the eigenvalues of the material tangent is necessary for the Barzilai-Borwein scheme. We demonstrate the power of the proposed method for linear elastic and inelastic large scale problems with finite and infinite material contrast.     

Room temperature R-curve and stable crack growth behaviour of ZrB2–SiC ceramic composites

ABSTRACT

R-curve and controlled stable crack growth behaviour of ZrB₂–17vol.-%SiC and ZrB₂–45vol.-%SiC ceramic composites was studied on V-notched samples using four-point bending at room temperature. The rising K_1R behaviour was determined as a function of the crack extension Δa with a crack bridging mechanism being dominant in such behaviour. Significant differences in crack growth rates were found within the same composition of ceramics simply as the crack length varied during crack growth processes. These differences are indicative of the significant influence of microstructural parameters of the ceramics on crack propagation. The peculiarities of stress intensity factor K₁ and the crack growth-specific behaviour in ZrB₂–SiC particulate ceramic composites are discussed.     

Digital self-control interventions for distracting media multitasking - A systematic review

Digital distractions can interfere with goal attainment and lead to undesirable habits that are hard to get red rid of. Various digital self-control interventions promise support to alleviate the negative impact of digital distractions. These interventions use different approaches, such as the blocking of apps and websites, goal setting, or visualizations of device usage statistics. While many apps and browser extensions make use of these features, little is known about their effectiveness. This systematic review synthesizes the current research to provide insights into the effectiveness of the different kinds of interventions. From a search of the ‘ACM’, ‘Springer Link’, ‘Web of Science’, ’IEEE Xplore’ and ‘Pubmed’ databases, we identified 28 digital self-control interventions. We categorized these interventions according to their features and their outcomes. The interventions showed varying degrees of effectiveness, and especially interventions that relied purely on increasing the participants' awareness were barely effective. For those interventions that sanctioned the use of distractions, the current literature indicates that the sanctions have to be sufficiently difficult to overcome, as they will otherwise be quickly dismissed. The overall confidence in the results is low, with small sample sizes, short study duration, and unclear study contexts. From these insights, we highlight research gaps and close with suggestions for future research.     

Autonomously Self‐Reporting Hard Coatings: Tracking the Temporal Oxidation Behavior of TiN by In Situ Sheet Resistance Measurements

Monitoring the structural health and integrity of coated components is of vital importance to increase their lifetime and the overall sustainability of the targeted applications. Here, the temporal oxidation behavior of TiN thin films is tracked using in situ sheet resistance measurements. Based on correlative film morphology, structure, and local composition data, it is evident that observed resistance changes are caused by oxidation of TiN. Thickness measurements of the remaining TiN under the oxide layer are in very good agreement with thicknesses deduced from in situ sheet resistance measurements. Hence, the in situ measured sheet resistance is an autonomous self‐reporting property useful for tracking the temporal oxidation behavior of TiN coatings.