An acrylate-based quasi-solid polymer electrolyte incorporating a novel dinitrile poly(ethylene glycol) plasticizer for lithium-ion batteries

Journal of Materials Science - The performance of solid polymer electrolytes is characterized by lower ionic conductivity than conventional liquid electrolytes but provides advantages in terms of...     

Real-time organic aerosol chemical speciation in the indoor environment using extractive electrospray ionization mass spectrometry

Understanding the sources and composition of organic aerosol (OA) in indoor environments requires rapid measurements, since many emissions and processes have short timescales. However, real-time molecular-level OA measurements have not been reported indoors. Here, we present quantitative measurements, at a time resolution of five seconds, of molecular ions corresponding to diverse aerosol-phase species, by applying extractive electrospray ionization mass spectrometry (EESI-MS) to indoor air analysis for the first time, as part of the highly instrumented HOMEChem field study. We demonstrate how the complex spectra of EESI-MS are screened in order to extract chemical information and investigate the possibility of interference from gas-phase semivolatile species. During experiments that simulated the Thanksgiving US holiday meal preparation, EESI-MS quantified multiple species, including fatty acids, carbohydrates, siloxanes, and phthalates. Intercomparisons with Aerosol Mass Spectrometer (AMS) and Scanning Mobility Particle Sizer suggest that EESI-MS quantified a large fraction of OA. Comparisons with FIGAERO-CIMS shows similar signal levels and good correlation, with a range of 100 for the relative sensitivities. Comparisons with SV-TAG for phthalates and with SV-TAG and AMS for total siloxanes also show strong correlation. EESI-MS observations can be used with gas-phase measurements to identify co-emitted gas- and aerosol-phase species, and this is demonstrated using complementary gas-phase PTR-MS observations.     

Chemical exposures from upholstered furniture with various flame retardant technologies

Upholstered furniture is often manufactured with polyurethane foam (PUF) containing flame retardants (FRs) to prevent the risk of a fire and/or to meet flammability regulations, however, exposure to certain FRs and other chemicals have been linked to adverse health effects. This study developed a new methodology for evaluating volatile organic compound (VOC) and FR exposures to users of upholstered furniture by simulating use of a chair in a controlled exposure chamber and assessing the health significance of measured chemical exposure. Chairs with different fire-resistant technologies were evaluated for VOC and FR exposures via inhalation, ingestion, and dermal contact exposure routes. Data show that VOC exposure levels are lower than threshold levels defined by the US and global indoor air criteria. Brominated FRs were not detected from the studied chairs. The organophosphate FRs added to PUF were released into the surrounding air (0.4 ng/m³) and as dust (16 ng/m²). Exposure modeling showed that adults are exposed to FRs released from upholstered furniture mostly by dermal contact and children are exposed via dermal and ingestion exposure. Children are most susceptible to FR exposure/dose (2 times higher average daily dose than adults) due to their frequent hand to mouth contact.     

A comparative study of the tensile properties of compression molded and 3D printed PLA specimens in dry and water saturated conditions

Journal of Mechanical Science and Technology - This research work presents a comparative study of the tensile properties of polylactic acid (PLA) specimens per ASTM D638-14 fabricated by...     

Experimental investigation of unconfined spherical and cylindrical flame propagation in hydrogen-air mixtures

This paper presents results of experimental investigations on spherical and cylindrical flame propagation in pre-mixed H₂/air-mixtures in unconfined and semi-confined geometries. The experiments were performed in a facility consisting of two transparent solid walls with 1 m² area and four weak side walls made from thin plastic film. The gap size between the solid walls was varied stepwise from thin layer geometry (6 mm) to cube geometry (1 m). A wide range of H₂/air-mixtures with volumetric hydrogen concentrations from 10% to 45% H₂ was ignited between the transparent solid walls. The propagating flame front and its structure was observed with a large scale high speed shadow system. Results of spherical and cylindrical flame propagation up to a radius of 0.5 m were analyzed. The presented spherical burning velocity model is used to discuss the self-acceleration phenomena in unconfined and unobstructed pre-mixed H₂/air flames.     

Precisely Controlled Microsphere Design via Visible‐Light Cross‐Linking of Functional Prepolymers

A new strategy for particle synthesis is enabled by utilizing modern synthetic, polymer, and photochemical techniques to facilitate the synthesis of highly narrow–disperse multifunctional microspheres from visible‐light induced crosslinking of prepolymers in both a single and dual polymer system. The approach requires no stabilizers, bases, or initiators, and proceeds at ambient temperature to yield microspheres with a tunable size range (0.25–5 µm) in less than 4 h, depending largely on solvent composition, but also polymer concentration (2–10 mg mL^?1), ratio, and irradiation intensity (3–20 W). Critically, the visible‐light induced dimerization reaction exploited herein enables simple functional particle syntheses via a single polymer system. Underpinned by an in‐depth kinetic analysis of the particle formation as well as a detailed small molecule study, the mechanism for particle formation is also elucidated. Importantly, inherent advantages of the system are exploited for surface functionalization of residual acrylate and hydroxyl groups (generating inherently fluorescent particles).     

Polyphenol conjugated poly(beta-amino ester) polymers with hydrogen peroxide triggered degradation and active antioxidant release

Oxidative stress has been implicated as a primary or secondary player to numerous diseases. A potential approach to control oxidative stress induced diseases is to deliver small antioxidant compounds to compromised sites at equivalent rates of reactive oxygen species (ROS) generation. This becomes a complicated task as antioxidant molecules typically have poor bioavailability and stability. Antioxidants synthesized into poly(beta-amino ester) (PBAE) crosslinked polymers have shown improved delivery by enhancing stability while allowing controlled release through hydrolysis. The tunable crosslinked networks show significant response to specific oxidizing environments, where free radicals can be present. Curcumin conjugated PBAE bulk films have proportional rates of accelerated degradation, thus faster release of curcumin, in a range of low concentrations of hydrogen peroxide (H₂O₂)_, where 2′2-azobis(2-amidinopropane) dihydrochloride has no substantial impact. This effect suggests the possibility to create a system that releases its therapeutic agent in direct relationship to the need through ROS signaling. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48647.     

Comprehensive mutagenesis on yeast cytosine deaminase yields improvements in 5-fluorocytosine toxicity in HT1080 cells

Improved prodrug-activating enzymes have the potential to increase the therapeutic efficacy of gene-directed enzyme prodrug therapy (GDEPT). Yeast cytosine deaminase (yCD) is commonly used to convert the prodrug 5-fluorocytosine (5-FC) to the chemotherapeutic 5-fluorouracil for GDEPT. Mutagenesis studies on yCD aimed at improving its application in GDEPT have been limited to subsets of residues or have sought to improve a single property of the enzyme. We performed comprehensive site-saturation mutagenesis (CSM) on yCD designed to create all 2,983 possible unique protein mutants with a single amino acid substitution. We identified active variants through Escherichia coli genetic complementation and screened these mutants, and combinations thereof, for increased ability to sensitize E. coli and HT1080 fibrosarcoma cells to 5-FC. Several mutants identified in this study showed increased sensitization ability for both E. coli and HT1080 cells indicating that CSM is an effective directed evolution tool for identifying unexpectedly beneficial mutations.     

Numerical investigation of light gas release,stratification and dissolution in TH22 test facility using 3-D CFD code GASFLOW-MPI

An accurate prediction of the hydrogen behaviors in the accident and management process is a crucial topic for both the hydrogen safety assessment and safety analysis in the confined enclosure like the containment of the nuclear power plant (NPP). Hence, the hydrogen behaviors including the transient light gas release, stratification and dissolution in the TH22 test facility for the NPP containment are analyzed and compared using the 3-D CFD code GASFLOW-MPI in this study. In this paper, the light gas helium is adopted as a substitute for the hydrogen in the calculations in accordance with the experiment. Firstly, the detached eddy simulation (DES) turbulence model, 3-D numerical model and experiment setup are introduced. Then, the hydrogen behaviors with the GASFLOW-MPI including the light gas release, stratification and dissolution are analyzed and validated with the experiment data. In addition, the velocity profiles, light gas concentrations, dimensionless numbers and temperature distributions are evaluated for the characteristics of the hydrogen behaviors. The results indicate that the calculation results agree well with the experiment data. Foremostly, the relative errors between the calculation results and experiment data during the phase of the dissolution of the light gas cloud are within 11.9%. Meanwhile, the relative errors of the time for the complete dissolution during the phase of the dissolution of the light gas cloud are within 5.0%. For the light gas release and stratification phase, the jet flow dominates as the Froude (Fr) number exceeds 10 during the time t = 600 s–800 s. Additionally, the time averaged centerline velocity and light gas concentration after the potential core region decay with a slop of 1/z which coincide with the theoretical jet limit. Lastly, the light gas concentrations and temperature distributions in all three phases are captured clearly with the GAFLOW-MPI. It demonstrates that the GASFLOW-MPI can accurately described the details of the related hydrogen behaviors in the accident and management process in the confined enclosure like the NPP. This paper can provide guidance for the numerical computation of the hydrogen safety issues in the confined space.