首页 | 官方网站   微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   102936篇
  免费   8958篇
  国内免费   4444篇
工业技术   116338篇
  2024年   73篇
  2023年   1847篇
  2022年   2523篇
  2021年   4301篇
  2020年   3378篇
  2019年   2971篇
  2018年   3191篇
  2017年   3434篇
  2016年   2831篇
  2015年   3978篇
  2014年   4974篇
  2013年   6070篇
  2012年   6668篇
  2011年   7469篇
  2010年   6051篇
  2009年   5866篇
  2008年   5751篇
  2007年   5420篇
  2006年   5878篇
  2005年   4822篇
  2004年   3401篇
  2003年   2949篇
  2002年   2676篇
  2001年   2377篇
  2000年   2423篇
  1999年   2609篇
  1998年   2266篇
  1997年   1923篇
  1996年   1717篇
  1995年   1452篇
  1994年   1212篇
  1993年   811篇
  1992年   631篇
  1991年   543篇
  1990年   407篇
  1989年   353篇
  1988年   271篇
  1987年   181篇
  1986年   139篇
  1985年   99篇
  1984年   52篇
  1983年   49篇
  1982年   50篇
  1981年   37篇
  1980年   40篇
  1979年   25篇
  1978年   22篇
  1976年   32篇
  1975年   19篇
  1973年   16篇
排序方式: 共有10000条查询结果,搜索用时 15 毫秒
1.
针对高功率激光器合成效率低、能量不集中的问题,构建基于角锥棱镜腔的相干合成激光器,分析远场合成效率不高的原因,提出光—电闭环的自适应驱动方法,通过反馈调节,克服因线路、器件以及其他电磁干扰等因素造成的不同步问题,提高相干合成效率。实验结果表明,经过自适应驱动的激光器,能显著提高相干合成效率,避免人工调整参数带来的误差,提高了激光器的稳定性和工作效率。  相似文献   
2.
尾矿是产生量和贮存量最大的工业固体废物,环境风险突出,已成为当前固体废物管理领域不可忽视的治理短板。尾矿中存在的有毒有害物质会对地表水、地下水、土壤、大气造成不同程度的影响。文章通过梳理我国尾矿管理制度,针对尾矿污染防治在政策法规不健全、环境监管能力薄弱、尾矿库污染防治工程措施等方面存在的问题,从完善环境管理政策体系,防范尾矿环境风险、提升应急事件处理能力、提升尾矿综合利用率等四方面提出了措施建议。  相似文献   
3.

Cr doped ZnAl2O4 spinel samples were prepared by the traditional solid state reaction and co-precipitation synthetic route, and the results suggest that the co-precipitation method has some superiority in contrast to the solid state reaction method. XRD, FT-IR, and XPS spectra confirmed that the well-crystallized spinel cubic phase of ZnAl2O4: Cr3+ samples were successfully formed. The morphology of the samples was investigated by FE-SEM and FE-TEM, and the results show that the samples by the co-precipitation route can generate a smaller size of particles compared to the solid state reaction. Photoluminescence excitation spectra monitored at 686 nm are comprised of two broad excitation bands near 530 nm and 395 nm, and the emission spectra show emissions ranging from 640 to 780 nm, due to the 2E?→?4A2 spin-forbidden transition of Cr3+ ions in spinel lattices. The optimized concentration monitored at 686 nm is 1%, while at 693 nm is 3.5%. Compared with the samples by solid state reaction method, the samples by co-precipitation method show preferable luminescent properties, such as the higher photoluminescence intensity and higher quantum efficiency. Several phosphor-converted LEDs were to investigate the applicability of the prepared samples. The results confirm that the phosphor has potential applications in plant growth and supplementing the red region in white-LEDs and the phosphors prepared by co-precipitation are more suitable to be used in phosphor-converted LED devices due to their preferable luminescent properties.

  相似文献   
4.
针对某铅锌尾矿嵌布粒度细、氧化程度高、泥化严重的问题,进行了一系列浮选试验研究.采用硫化混合浮选的工艺流程,经过一粗五精三扫浮选,在磨矿细度-0.074 mm含量占95%条件下,选取最优参数进行闭路实验,最终获得铅品位15.05%、回收率为34.31%,锌品位39.23%、回收率为49.82%的铅锌混合精矿.  相似文献   
5.
Thermal action in extraction process had effects on characteristic tryptic peptides identification and gelling properties of porcine gelatin. SDS-PAGE, HPLC-LTQ/Orbitrap high-resolution mass spectrometry, texture analyser and rheometer were used to evaluate collagen depolymerisation degree, characteristic tryptic peptides and gelling properties of gelatins prepared in various thermal actions. Results showed that with increasing temperature and time, depolymerisation degree enlarged, while gel strength, gelling and melting temperature decreased. Mass spectra showed that 47 and 49 common characteristic tryptic peptides were identified in gelatins extracted at 50 °C and 100 °C with various times, respectively. Moreover, 34 common characteristic tryptic peptides were identified in all gelatin samples. Further comparison between this work and our previous investigations yielded 20 common characteristic tryptic peptides, which stably exist in various thermal actions. These common characteristic tryptic peptides may be very helpful for the accurate authentication of porcine gelatin.  相似文献   
6.
为改善H型垂直轴风力机(VAWT)的气动特性,文章研究了6种翼型型线改变后的翼型对H型VAWT气动特性的影响,并进行了数值模拟计算和风洞试验。风洞试验验证了模拟计算的结果,证明了型线改变后的风力机对提高气动性有积极的作用。试验结果表明:1波浪型风机和Dimple型风机均可在一定叶尖速比(λ)范围内提高风力机的风能利用率,其中1波浪型风力机在低λ下最高可提高风能利用率13.76%,其单叶片切向力在下游区明显增大;Dimple型风力机在高λ下最高可提高风能利用率14.6%,其单叶片切向力在上游区明显增大。两种改型后的翼型均可改善流动分离,并提高VAWT的气动性能。  相似文献   
7.
文章率先提出一种新型防屈曲高强钢腹板可更换钢连梁(简称“新型钢连梁”):腹板采用高强钢,可提高钢连梁的屈服抗剪强度,连梁变形减小,从而减小可更换结构整体变形,便于更换;加劲肋紧贴腹板(但不焊接)提供约束,仅与上下翼缘焊接,可减少60%以上的焊接量。其次,设计并开展了11个试件的拟静力试验,研究了加劲肋间距(规范限值dmax、0.85dmax)、腹板厚度(6mm、8mm)、腹板钢材强度(Q460、Q550)和构造形式(加劲肋与腹板贴紧或焊接)等参数对新型钢连梁抗震性能的影响。试验结果表明:试件均发生剪切破坏;满足加劲肋间距限值的新型钢连梁,滞回曲线饱满,峰值时腹板未发生鼓曲且极限转角均超过0.1rad,大于规范限值0.08rad,表现出良好的耗能和变形能力;缩小加劲肋间距、增加腹板厚度或提高腹板钢材强度,新型钢连梁刚度及承载力提高;新型钢连梁峰值承载力较传统构造试件低约5%。最后,基于试验结果建立了有限元模型并开展了分析,研究结果表明:对腹板采用Q460、Q550高强钢材的新型钢连梁,峰值承载力计算时超强系数建议取1.43(长度比为0.5~1.0)或1.39(长度比为1.0~1.6)、1.25,以期为实际工程设计提供依据。  相似文献   
8.
9.
应用考虑气体可压缩性VOF模型对3种不同断面形状的出水流道虹吸形成过程进行了数值模拟,并搭建了试验平台加以验证,从流速分布、水力损失、虹吸形成时间三方面分析了断面形状对虹吸式出水流道水力特性的影响.结果表明:模拟结果与试验结果有很好的一致性;虹吸式出水流道的沿程截面形状对其水力特性影响很大,合理设计的渐变断面能使流道典型断面流速、压力分布均匀,有额外的局部水头损失;方管的排气能力较圆管更佳,圆管具有更小的水力损失.  相似文献   
10.
基于密度泛函理论(DFT)第一性原理方法,研究了Si、Ni、Mn、Cr、Mo在fcc-Fe/NbX (X=C, N)界面的偏析行为,并分析了合金元素偏析对界面体系的影响。结果表明,fcc-Fe/NbN界面结合强度相较于fcc-Fe/NbC界面结合强度略有提升;Si稳定存在于Fe基体中,Ni、Mn在界面有轻微偏析倾向,Cr、Mo在界面和NbX (X=C,N)内均存在偏析,其中,Mo向界面偏析倾向更大;Cr、Mo偏析在fcc-Fe/NbC界面一定程度上降低了界面的结合能力,但体系稳定性有所提升,Cr、Mo偏析在fcc-Fe/NbN界面一定程度上提高了界面的结合能力,但Mo使得体系稳定性下降。  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号