Importance of the biogenic organic matter in photo-formation of dissolved gaseous mercury in a culture of the marine diatom Chaetoceros sp

Laboratory experiments on DGM production under light/dark cycles in a culture of the marine diatom Chaetoceros sp. spiked with 200 ng l(-1) of mercury have been performed. DGM formation has been investigated also in the cell exudates, obtained by filtration of the cell culture. Results show that the cell culture and the filtrate give the same value of DGM production (2.24+/-0.88 pg min(-1) l(-1) and 2.23+/-0.02 pg min(-1) l(-1), respectively) in the light (40 W m(-2)), values much higher than to those obtained in the medium culture alone. A significant DGM production has been measured in dark conditions both in the cell culture (0.48+/-0.11 pg min(-1) l(-1)) and in the filtrate (0.85+/-0.10 pg min(-1) l(-1)). The results highlight that the organic compounds released by the cell in the culture medium play a fundamental role in the DGM photo-formation processes.     

A framework for formal analysis and simulative evaluation of security attacks in wireless sensor networks

Journal of Computer Virology and Hacking Techniques - When designing Wireless Sensor Networks it is important to analyze their security risks and provide adequate solutions for protecting them from...     

Infiltration mechanism and factors influencing carbon/carbon–Zr–Ti–C composites prepared by liquid metal infiltration

The effects of fibre architecture, reaction temperature and holding time on the infiltration performance of carbon/carbon (C/C)–Zr–Ti–C composites prepared by liquid metal infiltration were investigated. The results indicated that samples with a chopped-web needled preform and low initial density had a high final density. Increasing the reaction temperatures resulted in a decrease of the final density of samples. Additionally, increasing the initial holding time appeared to obviously result in a high final density, but its effectiveness was not obvious in later observations. An analysis of the infiltration kinetics and mechanisms indicated that the diffusivity of carbon in the carbide, the open-pore sizes and their distribution in C/C composites were the essential characteristics that controlled the height of infiltrating melts.     

The behaviour of consolidated Neapolitan yellow Tuff against salt weathering

Bulletin of Engineering Geology and the Environment - Salt crystallization is a strong weathering agent in porous building materials. The crystallization pressure exerted by salt crystals, growing...     

Application of a novel microwave plasma treatment for the sintering of nickel oxide coatings for use in dye-sensitized solar cells

In this study the use of microwave plasma sintering of nickel oxide (NiO_x) particles for use as p-type photoelectrode coatings in dye-sensitized solar cells (DSSCs) is investigated. NiO_x was chosen as the photocathode for this application due to its stability, wide band gap and p-type nature. For high light conversion efficiency DSSCs require a mesoporous structure exhibiting a high surface area. This can be achieved by sintering particles of NiO_x onto a conductive substrate. In this study the use of both 2.45 GHz microwave plasma and conventional furnace sintering were compared for the sintering of the NiO_x particles. Coatings 1 to 2.5 μm thick were obtained from the sintered particles (mean particle size of 50 nm) on 3 mm thick fluorine-doped tin oxide (FTO) coated glass substrates. Both the furnace and microwave plasma sintering treatments were carried out at ~ 450 °C over a 5 min period. Dye sensitization was carried out using Erythrosin B and the UV–vis absorption spectra of the NiO_x coatings were compared. A 44% increase in the level of dye adsorption was obtained for the microwave plasma sintered samples as compared to that obtained through furnace treatments. While the photovoltaic performance of the DSSC fabricated using the microwave plasma treated NiO_x coatings exhibited a tenfold increase in the conversion efficiency in comparison to the furnace treated samples. This enhanced performance was associated with the difference in the mesoporous structure of the sintered NiO_x coatings.     

Catalyst Design by NH4OH Treatment of USY Zeolite

Hierarchical zeolites are a class of superior catalysts which couples the intrinsic zeolitic properties to enhanced accessibility and intracrystalline mass transport to and from the active sites. The design of hierarchical USY (Ultra‐Stable Y) catalysts is achieved using a sustainable postsynthetic room temperature treatment with mildly alkaline NH₄OH (0.02 m ) solutions. Starting from a commercial dealuminated USY zeolite (Si/Al = 47), a hierarchical material is obtained by selective and tuneable creation of interconnected and accessible small mesopores (2–6 nm). In addition, the treatment immediately yields the NH₄⁺ form without the need for additional ion exchange. After NH₄OH modification, the crystal morphology is retained, whereas the microporosity and relative crystallinity are decreased. The gradual formation of dense amorphous phases throughout the crystal without significant framework atom leaching rationalizes the very high material yields (>90%). The superior catalytic performance of the developed hierarchical zeolites is demonstrated in the acid‐catalyzed isomerization of α‐pinene and the metal‐catalyzed conjugation of safflower oil. Significant improvements in activity and selectivity are attained, as well as a lowered susceptibility to deactivation. The catalytic performance is intimately related to the introduced mesopores, hence enhanced mass transport capacity, and the retained intrinsic zeolitic properties.     

Updating of a DRASTIC-based Method for Specific Vulnerability Assessment in Carbonate Aquifers

Abstract

Some methodological modifications are suggested to improve a DRASTIC-based method as a reliable predictor of microbial contamination in extensively fractured and subordinately karstified carbonate aquifers. These modifications will allow a better assessment of vulnerability induced by the concentrated infiltration of surface runoff in two different scenarios: (a) when the karst system is entirely located within an unsaturated aquifer and (b) when the karst system is partially located within a saturated medium. The effectiveness of the updated method has been experimentally verified by comparing the vulnerability values with the results of a hydrogeological and microbiological study at a test site.     

Multifunctional TiO2 coatings for Cultural Heritage

Environmental pollution arising from industrial implants and urban factors is constantly increasing, causing aesthetical and durability concerns to urban structures exposed to the atmosphere.     

转Bt玉米暴露对亲代及子代大鼠免疫细胞分型及细胞因子的影响

为研究转苏云金芽胞杆菌(Bacillus thuringiensis,Bt)基因抗虫玉米长期食用对大鼠免疫的影响,以其亲本非转基因玉米饲料及商业饲料为对照,分别采用流式细胞术及液相芯片法检测喂养90 d后亲代及子代刚断乳大鼠外周血、脾脏免疫细胞分型及相关血清细胞因子的表达。结果发现,转Bt基因抗虫玉米饲料组亲代大鼠外周血和脾脏及子代脾脏各淋巴细胞亚群(CD4~+、CD8~+、TCRαβ~+、TCRγδ~+)的细胞数量比例及亲代血清中10种细胞因子表达水平均与非转基因玉米饲料组无显著差异(P0.05);子代外周血B淋巴细胞数量比例显著增高,巨噬细胞炎症蛋白-1α、单核细胞趋化因子-1β、白细胞介素-5表达水平明显降低(P0.05)。结果表明:转Bt基因抗虫玉米暴露90 d对亲代大鼠免疫系统影响不大;对子代刚断乳大鼠的细胞免疫及体液免疫有一定的影响。