Femtosecond Ti: Sa ultra short-pulse laser irradiation effects on the properties and morphology of the zirconia surface after ageing

Femtosecond pulses from a Ti:Sapphire laser were used to irradiate specimens of yttria-stabilised (35% mol) tetragonal zirconia (Y-TZP) with the purpose of studying the effects of the irradiations on their surface properties and morphology after ageing. Zirconia disks were divided into eight groups (n = 32) according to their surface treatment and subsequent ageing: Control: no treatment; sandblasting: Al₂O₃ sandblasting 50 μm; and ultrashort laser pulses irradiation with 25 μJ pulses, considering two different scanning steps based on the width between two grooves. These groups were duplicated and submitted to ageing. The surfaces were analysed using scanning electron microscopy (SEM), and X-ray diffraction. A finite element analysis, a biaxial flexure test, as well as fractographic and Weibull analyses, were performed. The strengths of the disks were statistically different for the treatment factor, and the principal stresses seemed to be concentrated at the centre of the specimens, as predicted by the computer simulations. Ageing decreased the strengths for all groups and increased the Weibull modulus for the laser group with the 40 μm-width between two grooves. The sandblasting group presented the highest monoclinic phase peak. Although the most significant strength was found within the sandblasting group, the phase transformation was favourable to the laser groups. The Weibull modulus was higher for the laser group with the 60 μm-width between two grooves, confirming the highest homogeneity of its failure distribution. Regardless of the surface treatment, strength was decreased with ageing in all groups. The femtosecond Ti:Sa ultra-short pulse laser irradiation can be suggested as an alternative to the gold standard sandblasting in long-term Y-TZP zirconia rehabilitations, such as crowns and veneers.     

High‐intensity sweeteners in espresso coffee: ideal and equivalent sweetness and time–intensity analysis

The efficient substitution of sucrose by a sweetener in beverages requires the application of some sensory techniques. First, one must determine the concentrations of the sweeteners under study, equivalent in sweetness to the ideal sucrose concentration. In addition, it is fundamental to determine which is most similar to sucrose. The objectives of this study were to determine the ideal sweetness for espresso coffee and the equivalent concentrations in sweetness of different sweeteners, as well as characterise the time–intensity profile of each sweetener in relation to sweetness. The sweeteners evaluated were sucralose, aspartame, neotame, a cyclamate/saccharin mixture (2:1) and stevia. The sucrose concentration considered ideal by consumers was 12.5% (w/v), and the equivalent concentrations of the sweeteners were 0.0159% for sucralose, 0.0549% for aspartame, 0.0016% for neotame, 0.0359% for the cyclamate/saccharin mixture and 0.0998% for stevia. The time–intensity analysis indicated that possibly the sweeteners neotame, aspartame and sucralose would be the best substitutes for sucrose.     

Dimensioning a Cyclone Separator for Circulating Fluidized Bed Gasifier: Validation of a Procedure

Abstract

The transformation process of biomass through gasification may produce a large amount of solid particles of different granulometry. In order to avoid equipment damage, these particles must be separated from the producer gas before it is utilized in other processes. This separation can be performed through a cyclone separator. This equipment is part of the circulating fluidized bed gasifier and is responsible for particulate separation and producer gas partial cleanup. Cyclone dimensioning requires careful attention and must be done according to the conditions this device is going to be subject. Thus, this work aims to validate and analyze a dimensioning methodology and apply it to a gasifier. Three cyclone geometries were considered (Stairmand, Swift and Lapple) and they were compared in terms of collection efficiency and pressure drop. A parameter sensibility study was performed. Variations of dimension, efficiency and pressure drop for a producer gas volumetric flow range were tested. It was found that an increase of the volumetric flow rate provoked the rise of separation efficiency and pressure drop. From the tested geometries, Swift presented the highest collection efficiency and pressure drop.     

Zuverlässige Prozesse durch Vakuumkomponenten mit definierten Ausgasraten

Reliable processes by use of vacuum components with specified outgassing rates Contamination of vacuum components cannot be avoided in the manufacturing process. In order to significantly reduce particulate and organic impurities, a multi-stage cleaning process and proof of cleanliness are essential. In order to guarantee a reproducible quality of the cleanliness of vacuum components, uniform standards for defined outgassing rates are necessary. The development of Vacom Purity Classes serves the generally accessible specification of components and characterises their vacuum and cleanroom suitability. Vacom Vacuum Classes guarantee the suitability of vacuum components for use in UHV/XHV. In this article, the importance of cleaning of vacuum chambers and components is examined as well as the need to establish a uniform method for the quantitative measurement of the outgassing rate is highlighted. The systematic division into Vacom Purity and Vacuum Classes provides the basis for a cross-industry standard for the defined quality of vacuum processes.     

Environmentally Friendly Determination of Quality Parameters of Biodiesel/Diesel Blends Using Fourier Transform Infrared Spectra

Multivariate calibration models based on data from mid‐infrared spectroscopy of biodiesel/diesel blends were obtained. The blends were prepared from diesel oil and esters of soybean oil, waste cooking oil, and hydrogenated vegetable oil in proportions ranging from 0 to 100 % biodiesel. The results showed that the multivariate regression models with interval partial least squares (iPLS), backward interval partial least squares (biPLS), and synergy interval partial least squares (siPLS) were able to determine the fractions of the infrared spectrum that contain the relevant information for estimating the values of physicochemical properties, flash point, specific gravity, and cetane number, which are used in quality control of the blends. In the best models, the values of determination coefficients were greater than 0.9500, proving their efficiency as an alternative to traditional analytical methods.     

Biocompatibility and cutaneous reactivity of cellulosic polysaccharide film in induced skin wounds in rats

The development of a skin substitute suitable for immediately performing the function of the lost dermis and epidermis could result in a positive impact on the treatment of patients with extensive skin lesions. A biopolymer film was applied to skin wounds to investigate the biocompatibility and cutaneous reaction and to test its activity as a mechanical barrier and conductor in the healing process. Forty Wistar rats of both sexes were used in the present study. Two excisions were performed in the dorsal part of the skin flaps. The polysaccharide film was applied over one of the incisions and other incision was washed with saline. The time spent for complete healing of both lesions was virtually the same in both groups, during 21 days of observation. The film remained attached to the bed of the exposed wound for an average period of 6 days. There were no statistically significant differences with regard to lesion measurement area at assessment times of 2nd, 7th and 14th postoperative days. At day 21, the scar area showed a significant difference (0.0229). After 40 days, all wounds were completely healed. No statistically significant differences were found between the histological parameters assessed in the experimental and control groups. The cellulosic polysaccharide film integrated well with the tissue showing high biocompatibility and low skin reactivity.