Disentangling age and cohorts effects on home-ownership and housing wealth in Turkey

This paper analyses the contribution of age and cohort effects on home-ownership and housing wealth in Turkey. I construct a pseudo-panel data set based on birth-year cohorts by using sixteen waves of the Turkish Statistical Institute Household Budget Surveys from 2003 to 2018. The empirical analysis reveals that young cohorts are less likely to own their homes, but they are more likely to have outstanding housing debt. Moreover, they are as willing to invest in second homes as older cohorts. I estimate a Heckman two-step selection model to distinguish the contribution of the improvement in the quality of new buildings to home values. As a result, I find that cohort effects on home values are significantly larger for young households even after controlling for age effects and the improvement in the quality of new buildings. Thus, the empirical findings show that young cohorts have a stronger housing demand than old cohorts.

     

Hazardous waste management problem: The case for incineration

We define the hazardous waste management problem as the combined decisions of selecting the disposal method, siting the disposal plants and deciding on the waste flow structure. The hazardous waste management problem has additional requirements depending on the selected disposal method. In this paper we focus on incineration, for which the main additional requirement is to satisfy the air pollution standards imposed by the governmental restrictions. We propose a cost-based mathematical model in which the satisfaction of air pollution standards is also incorporated. We used the Gaussian Plume equation in measuring the air pollution concentrations at population centers. A large-scale implementation of the proposed model within Turkey is provided.     

Electrical and optical properties of fluorine-doped CdO films deposited by ultrasonic spray pyrolysis

The CdO:F samples have been deposited onto microscope glass substrates at 250 °C by ultrasonic spray pyrolysis method. With the incorporation of fluorine into CdO, the direct optical transition has shifted towards the shorter wavelengths, and the transparency of the material has increased at a given wavelength above the fundamental absorption edge. The shift in the absorption edge is explained by means of the Moss–Burstein effect, which is also supported with the results of the current–voltage characteristics. Here, a correlation has been established between the band broadening and the increase in conductivity due to the increase in carrier density.     

Swoop: A Web Ontology Editing Browser

In this paper, we describe Swoop, a hypermedia inspired Ontology Browser and Editor based on OWL, the recently standardized Web-oriented ontology language. After discussing the design rationale and architecture of Swoop, we focus mainly on its features, using illustrative examples to highlight its use. We demonstrate that with its Web-metaphor, adherence to OWL recommendations and key unique features, such as Collaborative Annotation using Annotea, Swoop acts as a useful and efficient Web Ontology development tool. We conclude with a list of future plans for Swoop, that should further increase its overall appeal and accessibility.     

Performance evaluation of a submerged membrane bioreactor for the treatment of brackish oil and natural gas field produced water

Produced water, which is co-produced during oil and gas manufacturing, represents one of the largest sources of oily wastewaters. Therefore, treatment of this produced water may improve the economic viability and lead to a new source of water for beneficial use. In this study a submerged hollow fiber membrane bioreactor (MBR) has been studied experimentally for the treatment of brackish oil and natural gas field produced water. This type of wastewater is also characterized with relatively moderate to high amount of salt, oil and total petroleum hydrocarbons (TPH). However, the bacteria which are growing in conventional activated sludge and MBR cannot survive at these strict conditions, therefore acclimation of the bacteria is of vital importance. The performance of the biological system, membrane permeability, the rate and extent of TPH biodegradability have been investigated under different sludge age and F/M ratios. The results obtained by gas chromatography analyses showed that the MBR system could be very effective in the removal of TPH from produced water and a significant improvement in the effluent quality was achieved.     

Arduino-based slider setup for gas–liquid mass transfer investigations: Experiments and CFD simulations

The implementation of traditional sensors is a drawback when investigating mass transfer phenomena within microstructured devices, since they disturb the flow and reactor characteristics. An Arduino based slider setup is developed, which is equipped with a computer-vision system to track gas–liquid slug flow. This setup is combined with an optical analytical method allowing to compare experimental results against CFD simulations and investigate the entire lifetime of a single liquid slug with high spatial and temporal resolution. Volumetric mass transfer coefficients are measured and compared with data from literature and the mass transfer contribution of the liquid film is discussed.     

Thermal degradation characteristic of Tetra Pak panel boards under inert atmosphere

hermal degradation characteristics of Tetra Pak panel boards (TPPB) can be useful to improve usage of such panels as an alternative to wood-based products such as plywood, fiberboard, and particleboard. In the study, samples from the TPBBs manufactured from waste Tetra Pak packages (WTPP) were heated in a nitrogen atmosphere at different heating rates (10, 15 and 20 °C/min) using a thermal analysis system. The Coats-Redfern kinetic model was applied to calculate kinetic parameters. The degradation rate equations were then established. In addition, the kinetic compensation effect (KCE) was used to correlate the pre-exponential factor (k _o ) with activation energy (E _a ) and the existence of the KCE was accepted. TG-FT/IR analyses were applied to the TPPB degradation and then the FT-IR stack plot was used to analyze gas products (CO₂, CH₄, HCOOH, and CH₃OH). Infrared vibrational frequencies and the micro, crystal structure of the TPPBs were investigated by Fourier transform infrared spectroscopy (FT-IR), Scanning electron microscope (SEM) and X-Ray diffraction analysis (XRD), respectively.     

Pervaporation of organic compounds from aqueous mixtures using polydimethylsiloxane‐containing block copolymer membranes

Pervaporation of aqueous mixtures of ethanol, acetone, butanol, isobutanol, and furfural through polystyrene‐b‐polydimethylsiloxane‐b‐polystyrene (SDS) triblock copolymer membranes is reported. These mixtures are important for biofuel production from lignocellulosic feedstocks. Feedstock depolymerization results in the formation of furfural which must be removed before fermentation. Ethanol, butanol, isobutanol, and acetone are important fermentation biofuels. The membrane selectivity of SDS is about unity over a wide range of concentrations of aqueous ethanol mixtures, similar to the membrane selectivity of crosslinked polydimethylsiloxane (PDMS). The permeabilities of butanol, isobutanol, and furfural are larger than those of ethanol and acetone. The volatile organic compound permeability through SDS is similar to or higher than that through PDMS across a broad range of temperatures and feed concentrations is found. More selective and permeable membranes are needed to lower the cost of biofuel purification. The SDS membranes developed are but one step toward improved membranes. © 2015 American Institute of Chemical Engineers AIChE J, 61: 2789–2794, 2015     

Impact of module design on the performance of membrane bioreactors treating municipal wastewater

Membranes are located in a membrane module that physically seals and isolates the feed stream from the permeate flux in membrane bioreactors (MBRs). Therefore, module type, structure, and geometrical configuration are critical design considerations affecting membrane performance in MBRs. In this study, impact of membrane module design on treatment and filtration performance of MBRs was investigated. For this purpose, two flat sheet membrane modules with different outlet structures and module geometries, including rectangular- and D-shaped, were tested. In addition to the differences in outlet structure and module geometry, size of circular structures which supported membranes in rectangular- and D-shaped modules differed from each other. Considering the results, permeate quality was not affected from the change in the module design. However, the most remarkable impact of the module design was observed on the transmembrane pressure (TMP) evolution and fouling potential. D-shaped membrane module including smaller circular structures resulted in a decrease in fouling potential and thus, this module could be operated longer time in comparison to rectangular-shaped membrane module without a severe TMP increase. The observed differences in TMP increase and fouling potential lead to the hypothesis that module design is a critical factor affecting filtration performance in MBRs.