Investigation of the Influence of Heat Balance Shifts on the Freeze Microstructure and Composition in Aluminum Smelting Bath System: Cryolite-CaF2-AlF3-Al2O3

Metallurgical and Materials Transactions B - In an aluminum electrolysis cell, the side ledge forms on side walls to protect it from the corrosive cryolitic bath. In this study, a series of...     

Investigation of Freeze Lining in Copper-Containing Slag Systems: Part III. High-Temperature Experimental Investigation of the Effect of Bath Agitation

Freeze-lining technologies have been employed to protect the cooling walls of reactors from chemically aggressive molten reactants. To date, the designs of freeze linings for pyrometallurgical reactors have been based on the basic assumption that the interface between the deposit and the bath remains at the liquidus temperature of the bulk liquid. There is, however, increasing evidence that interface temperature between stagnant deposit and bath is less than the liquidus of the bulk liquid. A previous study also demonstrated that the effects of bath chemistry need to be taken into account in freeze-lining designs. To investigate the fundamental processes involved in the formation and stability of the deposit, experimental laboratory studies have been undertaken in the Cu-Fe-Si-Al-O slag system in equilibrium with metallic copper using an air-cooled probe technique. In the current study, the effects of bath agitation on the microstructure, morphologies of the phases, and formation of various layers across the freeze-lining deposit were studied at steady-state conditions. It appears that the changes in the fluid flow pattern through changes in shear intensities result in corresponding changes in the deposit microstructure, formation of the sealing primary phase layer, thus influencing the interface temperature between freeze-lining deposit and the liquid bath.     

Heat transfer at electrohydrodynamic pumping through in an evaporator-condensing system

The article considers the hydrodynamic and temperature dependencies of heat and mass transfer in an evaporator-condensing system representing a pulsating heat pipe with a built-in heater used as an evaporator, a vapor condenser, and an electrohydrodynamic pump for forced pumping through of a coolant. The influence of the electric current intensity and voltage on the electrohydrodynamic pump, the applied power, the temperature head, and other factors on the heat transfer has been investigated in order to reveal the physical peculiarities of the processes under investigation and the creation of a background for their calculation. An electric field is used only in the electrohydrodynamic pump, which is situated outside of the evaporator and condenser. The experimental data are treated in the form of “rectified” dependencies having a generalized character between the dependent and governing parameters of the process. The obtained results can be used for in-depth investigations, as well as for the design and fabrication of cooling and compact thermostabilizing electrohydrodynamic devices.     

Experimental Study of Ferrous Calcium Silicate Slags: Phase Equilibria at {\text{P}}_{{{\text{O}}_{2} }} Between 10?5?atm and 10?7?atm

Ferrous calcium silicate slags, whose principal components are “FeO _x ”-CaO-SiO₂, are widely used in copper smelting and converting operations. In the current study, high-temperature equilibration and rapid quenching techniques were used to study the phase equilibria of the ferrous calcium silicate slags. The compositions of phases in the slags were measured accurately using electron probe X-ray microanalysis (EPMA). The phase equilibria of the system have been characterized at oxygen partial pressures between 10⁻⁵ atm and 10⁻⁷ atm at selected temperatures between 1473 K and 1623 K (1200 °C and 1350 °C). The effects of oxygen partial pressure and temperature on the compositions of phases in the slags are presented.     

Effects of Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and CaO/SiO<Subscript>2</Subscript> Ratio on Phase Equilbria in the ZnO-“FeO”-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-CaO-SiO<Subscript>2</Subscript> System in Equilibrium with Metallic Iron

The phase equilibria and liquidus temperatures in the ZnO-“FeO”-Al₂O₃-CaO-SiO₂ system in equilibrium with metallic iron have been determined experimentally in the temperature range 1383 K to 1573 K (1150 °C to 1300 °C). The experimental conditions were selected to characterize lead blast furnace and imperial smelting furnace slags. The results are presented in a form of pseudoternary sections ZnO-“FeO”-(Al₂O₃ + CaO + SiO₂) with fixed CaO/SiO₂ and (CaO + SiO₂)/Al₂O₃ ratios. It was found that wustite and spinel are the major primary phases in the composition range investigated. Effects of Al₂O₃ concentration as well as the CaO/SiO₂ ratio on the primary phase field, the liquidus temperature, and the partitioning of ZnO between liquid and solid phases have been discussed for zinc-containing slags.     

Coupled experimental and thermodynamic study of the Zn-Fe-Si-O system

Experimental and thermodynamic modeling studies have been carried out on the Zn-Fe-Si-O system. This research is part of a wider program to characterize zinc/lead industrial slags and sinters in the PbO-ZnO-SiO₂-CaO-FeO-Fe₂O₃ system. Experimental investigations involve high-temperature equilibration and quenching techniques followed by electron probe X-ray microanalysis (EPMA). Liquidus temperatures and solid solubilities of the crystalline phases were measured in the temperature range from 1200 °C to 1450 °C (1473 to 1723 K) in the zinc ferrite, zincite, willemite, and tridymite primary-phase fields in the Zn-Fe-Si-O system in air. These equilibrium data for the Zn-Fe-Si-O system in air, combined with previously reported data for this system, were used to obtain an optimized self-consistent set of parameters of thermodynamic models for all phases.     

Using Literal and Grammatical Statistics for Authorship Attribution

Markov chains are used as a formal mathematical model for sequences of elements of a text. This model is applied for authorship attribution of texts. As elements of a text, we consider sequences of letters or sequences of grammatical classes of words. It turns out that the frequencies of occurrences of letter pairs and pairs of grammatical classes in a Russian text are rather stable characteristics of an author and, apparently, they could be used in disputed authorship attribution. A comparison of results for various modifications of the method using both letters and grammatical classes is given. Experimental research involves 385 texts of 82 writers. In the Appendix, the research of D.V. Khmelev is described, where data compression algorithms are applied to authorship attribution.     

Phase Equilibria of “Cu2O”-“FeO”-CaO-MgO-Al2O3 Slags at PO2 of 10-8.5 atm in Equilibrium with Metallic Copper for a Copper Slag Cleaning Production

Limited data are available on phase equilibria of the multicomponent slag system at the oxygen partial pressures used in the copper smelting, converting, and slag-cleaning processes. Recently, experimental procedures have been developed and have been applied successfully to characterize several complex industrial slags. The experimental procedures involve high-temperature equilibration on a substrate and quenching followed by electron probe X-ray microanalysis. This technique has been used to construct the liquidus for the “Cu₂O”-“FeO”-SiO₂-based slags with 2 wt pct of CaO, 0.5 wt pct of MgO, and 4.0 wt pct of Al₂O₃ at controlled oxygen partial pressures in equilibrium with metallic copper. The selected ranges of compositions and temperatures are directly relevant to the copper slag-cleaning processes. The new experimental equilibrium results are presented in the form of ternary sections and as a liquidus temperature vs Fe/SiO₂ weight ratio diagram. The experimental results are compared with the FactSage thermodynamic model calculations.     

Phase Equilibria Studies in the System ZnO-“FeO”-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-CaO-SiO<Subscript>2</Subscript> Relevant to Imperial Smelting Furnace Slags: Part II

The phase equilibria and the liquidus temperatures in the system ZnO-“FeO”-Al₂O₃-CaO-SiO₂ have been determined experimentally in equilibrium with metallic iron. Specifically, the effects of Al₂O₃ concentrations in Imperial Smelting Furnace slags are identified, and the results are presented in the form of pseudo-ternary sections ZnO-“FeO”-(Al₂O₃ + CaO + SiO₂) in which CaO/SiO₂ = 0.93 and (CaO + SiO₂)/Al₂O₃ = 5.0 and 3.5, respectively. It was found that, in the presence of Al₂O₃, the spinel phase is formed, the spinel primary phase field expands, and the wustite and melilite primary phase fields are reduced in size with an increasing Al₂O₃ concentration. The implications of the findings to industrial practice are discussed.