Hydrothermal Carbonization of Sewage Sludge: Analysis of Process Severity and Solid Content

Hydrothermal carbonization of sewage sludge was carried out with the aim to evaluate the influence of process severity and initial solid content. Response surface methodology was applied to model yield and C yield responses. Enhanced dewaterability performance was recorded under mild processing conditions. The treatment promoted concentration and immobilization of Pb, Cd, Ni, Zn, and Cu. Variation of the solid content showed a stronger influence than severity on average yield and C yield. Higher heating values (HHVs) and energy retention efficiencies (EREs) of hydrochars obtained at the lowest solid content displayed the lowest values. Hence, the energy requirements of a first dewatering step should be compared with the related improvement in terms of HHV and ERE when sludge is used as feedstock.     

A Mixed Ligand Approach for the Asymmetric Hydrogenation of 2‐Substituted Pyridinium Salts

Herein we describe a new methodology for the asymmetric hydrogenation (AH) of 2‐substituted pyridinium salts. An iridium catalyst based on a mixture of a chiral monodentate phosphoramidite and an achiral phosphine was shown to hydrogenate N‐benzyl‐2‐arylpyiridinium bromides to the corresponding N‐benzyl‐2‐arylpiperidines with full conversion and good enantioselectivity. The mechanism of the reaction under optimized conditions was investigated via kinetic measurements and isotopic labeling experiments. Our study suggests that the hydrogenation starts with a 1,4‐hydride addition and that the enantiodiscriminating step involves the reduction of an iminium intermediate.

     

Persistent organochlorine compounds in fetal and maternal tissues: evaluation of their potential influence on several indicators of fetal growth and health

Some organochlorine compounds, such as polychlorinated biphenyls (PCBs), have a tendency to bioaccumulate in humans and predators at the top of the food chain. We have recently confirmed the transplacental transfer of these compounds and the present study has been designed on the same material with the aim of investigating their potential health effects on newborns from 70 pregnant women, resident in a Northern Italy industrial town. Organochlorine compounds [namely, p,p′-dichlorodiphenyltrichloroethane (p,p′-DDT), p,p′-dichlorodiphenyldichloroethene (p,p′-DDE), hexachlorobenzene (HCB), and PCBs] have been analyzed both in cord and maternal serum, placenta, and maternal subcutaneous adipose tissue by GC-MSD. p,p′-DDT levels in the adipose tissue resulted significantly (p < 0.05) related to birth length. Mothers of neonates born by preterm programmed caesarean delivery showed significantly (p < 0.005 for both) higher serum p,p′-DDE serum concentrations and p,p′-DDT levels in the adipose tissue, as compared to mothers delivering at term.     

Transient liquid phase bonding of HfC-based ceramics

Transient liquid phase (TLP) bonding enables joining at lower temperatures than traditional bonding techniques and preserves the potential for high-temperature applications, making it particularly attractive for joining ultra-high-temperature ceramics (UHTCs) such as carbides and borides. The feasibility of a TLP joint between “pure” carbides has been recently demonstrated. The present study examines the interactions that occur between undoped HfC or MoSi₂-doped HfC and a Ni/Nb/Ni multilayer interlayer during TLP bonding. Bonding is performed at 1400 °C for 30 min in a high-vacuum furnace. SEM–EDS characterization shows that the reaction layer formed at the interlayer/ceramic interface contains mixed carbides and depending upon the ceramic, Ni–Nb–Hf, or Ni–Nb–Hf–Si, or Ni–Nb–Si alloys. Nanoindentation tests traversing the reaction layer between the bulk ceramic and Nb foil midplane also show a clear transition zone across which the indentation modulus and hardness vary. Crack-free joints have been obtained with undoped HfC. The addition of 5 vol% MoSi₂ introduces small (<5 μm long) isolated cracks within the reaction layer, whereas with 15 vol% MoSi₂ added, cracking was pervasive within the reaction layer. When the reaction layer exceeds a critical thickness, as in the case of the bond obtained with HfC doped with 15 vol% MoSi₂, residual stresses become sufficiently large to cause extensive cracking and bond failure. The results suggest a need to characterize and balance the positive role of additives on sintering with the potentially deleterious role they may have on joining.     

Edge Chipping Resistance of Alumina/Zirconia Laminates

The edge chipping test was used to measure the fracture resistance of alumina/alumina‐zirconia laminated structures. Tailored, symmetrical laminated structures were prepared with a variety of layer thickness. The laminates had a significantly greater edge chipping resistance. Laminates with thin layers were just as effective in impeding edge chips as laminates with thick layers.     

On the formation of blisters in annealed hydrogenated a-Si layers

Differently hydrogenated radio frequency-sputtered a-Si layers have been studied by infrared (IR) spectroscopy as a function of the annealing time at 350°C with the aim to get a deeper understanding of the origin of blisters previously observed by us in a-Si/a-Ge multilayers prepared under the same conditions as the ones applied to the present a-Si layers. The H content varied between 10.8 and 17.6 at.% as measured by elastic recoil detection analysis. IR spectroscopy showed that the concentration of the clustered (Si-H)_n groups and of the (Si-H₂)_n (n ≥ 1) polymers increased at the expense of the Si-H mono-hydrides with increasing annealing time, suggesting that there is a corresponding increase of the volume of micro-voids whose walls are assumed from literature to be decorated by the clustered mono-hydride groups and polymers. At the same time, an increase in the size of surface blisters was observed. Also, with increasing annealing time, the total concentration of bonded H of any type decreases, indicating that H is partially released from its bonds to Si. It is argued that the H released from the (Si-H)_n complexes and polymers at the microvoid surfaces form molecular H₂ inside the voids, whose size increases upon annealing because of the thermal expansion of the H₂ gas, eventually producing plastic surface deformation in the shape of blisters.     

Low-enthalpy geothermal energy: An opportunity to meet increasing energy needs and reduce CO2 and atmospheric pollutant emissions in Piemonte,Italy

The scope for diffusion of very low-enthalpy geothermal plants in the Piemonte region of Italy, using groundwater heat pumps (GWHP), was analyzed to check environmental sustainability and the benefits in terms of reducing greenhouse gas emissions from fossil fuels. GWHP implementation seemed particularly suitable to the specific characteristics of the Piemonte plain. An important thick and productive shallow aquifer is present across the entire plain beneath the major energy users and is therefore appropriate for geothermal energy development purposes. The building stock could be adapted to heat pumps in different ways, but objective-oriented policies will be required to reach the best results in terms of environmental benefits.     

Characterization of pop-in phenomena and indentation modulus in a polycrystalline ZrB2 ceramic

Low-load nanoindentation tests were carried out on a polycrystalline ZrB₂-based ceramic. Pop-in phenomena were observed when indentation marks were placed in the interior of the ZrB₂ grains. Both pop-in loads and pop-in extents were statistically distributed with a mutual strong correlation. The critical shear stresses at pop-in were in good agreement with the theoretical shear strength of ZrB₂. The experimental pop-in extents were also compared to a simplified model developed for homogeneous dislocation nucleation. The influence of the grain orientation on the indentation modulus was derived from the model of Delafargue and Ulm (2004)⁵⁰ and compared to the experimental results. Some results were definitely influenced by the polycrystalline structure of the investigated ceramic.