Rectangular Section Control Technology for Silicon Steel Rolling

Rectangular section control technology(RSCT)was introduced to achieve high-precision profile control during silicon steel rolling.The RSCT principle and method were designed,and the whole RSCT control strategy was developed.Specifically,RSCT included roll contour design,rolling technology optimization,and control strategy development,aiming at both hot strip mills(HSMs)and cold strip mills(CSMs).Firstly,through the high-performance variable crown(HVC)work roll optimization design in the upper-stream stands and the limited shifting technology for schedule-free rolling in the downstream stands of HSMs,a hot strip with a stable crown and limited wedge,local spot,and single wave was obtained,which was suitable for cold rolling.Secondly,an approximately rectangular section was obtained by edge varying contact(EVC)work roll contour design,edge-drop setting control,and closed loop control in the upper-stream stands of CSMs.Moreover,complex-mode flatness control was realized by coordinating multiple shape-control methods in the downstream stands of CSMs.In addition,the RSCT approach was applied in several silicon-steel production plants,where an outstanding performance and remarkable economic benefits were observed.     

基于最小截面差的相位展开

相位展开 (PhU)问题从理论上讲是一个不适定问题。根据被测物理量的整体连续性 ,提出了一种基于最小截面差的相位展开方法。理论分析和对实验条纹图的处理结果表明 ,该方法特别适合于具有相位间断大于π ,条纹欠采样及随机噪声等条纹图的相位展开。同支切 (Branchcuts)法相比 ,该方法具有算法简单、计算量小且可靠度高的特点 ,具有一定的实用性。     

A Complete Critical Path Algorithm for Test Generation of Combinational Circuits

It is known that critical path test generation method is not a complete algorithm for combinational circuits with reconvergent-fanout.In order to made it a complete algorithm,we put forward a reconvergent-fanoutoriented technique,the principal critical path algorithm,propagating the critical value back to primary inputs along a single path,the principal critical path,and allowing multiple path sensitization if needed.Relationship among test patterns is also discussed to accelerate test generation.     

A Newly Developed Non, Destructive Tritium Measurement Technique and Its Application to V-4Cr-4Ti Alloy

A non-destructive and in-situ technique for the measurement of tritium in materials, namely β-ray-induced X-ray spectrometry （BIXS）, has been developed recently. In the present study a V-4Cr-4Ti alloy was pre-heated at 1000℃ for 2 h to form a recrystallization structure before the tritium absorption experiments were conducted. Firstly the hydrogen isotope gas was charazterized by means of a quadrupole mass spectrometer （QMS） and a small-sized ionization chamber. Then hydrogen isotope absorption tests of V-4Cr-4Ti alloy were performed at 400 ℃ and the atomic concentration of hydrogen isotope in V-4Cr-4Ti alloy was estimated as 0.17% with a tritium content of approximately 2.5 ppm. Experimental results indicate that BIXS is a quite useful tool for quantitatively measuring the tritium content and tritium distribution in the surface layers of vanadium alloys and no strong trapping effects of tritium exist in the pre-heated V-4Cr-4Ti alloy.     

重议联合制碱生产的铵碱比

介绍了联合制碱生产铵碱比的合理范围、影响因素和计算方法。揭示以湿铵出售工厂生产的铵碱比数字,容易掩盖重碱结晶质量差、母液膨胀、损失氯化铵的矛盾;提出以铵碱比为牛鼻子,牵动以提高联合制碱总体水平为目的的经营管理要点。     

MECHANISM OF Re-B-V CO-PERMEATION

ＭＥＣＨＡＮＩＳＭＯＦＲｅＢＶＣＯＰＥＲＭＥＡＴＩＯＮ①ＬｉＦｅｎｇｚｈｅｎ，ＬｉｕＺｈａｏｊｉｎｇ，ＪｉｎＱｕａｎ，ＸｕＺｈｉｈｕｉＤｅｐａｒｔｍｅｎｔｏｆＭａｔｅｒｉａｌｓＳｃｉｅｎｃｅａｎｄＥｎｇｉｎｅｅｒｉｎｇ，ＨａｒｂｉｎＵｎｉｖｅｒ...     

LD2铝合金真空钎焊用铝基钎料的制备及性能研究

利用快速凝固技术制备了8种A1-Si-Cu-Ni四元合金钎料,研究了合金元素对铝基钎料性能的影响。实验结果表明:随着Cu含量的增加,钎料的熔点大大降低,且钎料的铺展面积和抗拉强度都呈现先增加后降低的趋势;随着Si含量的增加,钎料的熔点和抗拉强度皆为先增加后降低,同时钎料的铺展面积明显增加。     

低气压等离子喷涂TiO2涂层结构的研究

本研究分析了在低气压等离子喷涂条件下,TiO_2涂层的结构受等离子弧喷涂过程中氧分解量所影响。氧分解量很大程度上依赖于离子气中氢流量的大小,此外喷涂室压力也有一定影响。而等离子弧功率和喷涂距离对TiO_2涂层的氧分解量没有多大影响。在离子气中氢流量不变的条件下,涂层中Ti_3O_5量随喷涂室压力(从100×133.322Pa至400×133.322Pa)增加而增加。