Circulating Insulin-Like Growth Factor I is Involved in the Effect of High Fat Diet on Peripheral Amyloid β Clearance

Obesity is a risk factor for Alzheimer’s disease (AD), but underlying mechanisms are not clear. We analyzed peripheral clearance of amyloid β (Aβ) in overweight mice because its systemic elimination may impact brain Aβ load, a major landmark of AD pathology. We also analyzed whether circulating insulin-like growth factor I (IGF-I) intervenes in the effects of overweight as this growth factor modulates brain Aβ clearance and is increased in the serum of overweight mice. Overweight mice showed increased Aβ accumulation by the liver, the major site of elimination of systemic Aβ, but unaltered brain Aβ levels. We also found that Aβ accumulation by hepatocytes is stimulated by IGF-I, and that mice with low serum IGF-I levels show reduced liver Aβ accumulation—ameliorated by IGF-I administration, and unchanged brain Aβ levels. In the brain, IGF-I favored the association of its receptor (IGF-IR) with the Aβ precursor protein (APP), and at the same time, stimulated non-amyloidogenic processing of APP in astrocytes, as indicated by an increased sAPPα/sAPPβ ratio after IGF-I treatment. Since serum IGF-I enters into the brain in an activity-dependent manner, we analyzed in overweight mice the effect of brain activation by environmental enrichment (EE) on brain IGF-IR phosphorylation and its association to APP, as a readout of IGF-I activity. After EE, significantly reduced brain IGF-IR phosphorylation and APP/IGF-IR association were found in overweight mice as compared to lean controls. Collectively, these results indicate that a high-fat diet influences peripheral clearance of Aβ without affecting brain Aβ load. Increased serum IGF-I likely contributes to enhanced peripheral Aβ clearance in overweight mice, without affecting brain Aβ load probably because its brain entrance is reduced.     

过期药呋塞米在醋酸溶液中对冷轧钢的缓蚀作用

通过电导率测量、pH测量、同步热分析(STA)、Tafel极化曲线法和电化学交流阻抗谱法研究了不同浓度和温度下过期药呋塞米在1 mol/L的醋酸溶液中对冷轧钢缓蚀作用。实验结果表明:过期药呋塞米在1 mol/L的醋酸溶液中对冷轧钢有较好的缓蚀效果,且缓蚀率随着缓蚀剂浓度和温度的增加而增大。该缓蚀剂在醋酸中对钢是一种抑制阴极和阳极的混合型缓蚀剂。缓蚀剂在冷轧钢表面的吸附符合Langmuir吸附等温式,其吸附是自发、物理吸附过程。同步热分析还说明了该缓蚀剂易稳定吸附在冷轧钢表面。     

Progress on large area n‐type silicon solar cells with front laser doping and a rear emitter

We report on the progress of imec's n‐type passivated emitter, rear totally diffused rear junction silicon solar cells. Selective laser doping has been introduced in the flow, allowing the implementation of a shallow diffused front surface field and a reduction of the recombination current in the contact area. Simplifications have been implemented towards a more industrial annealing sequence, by replacing expensive forming gas annealing steps with a belt furnace annealing. By applying these improvements, together with an advanced texturing process and emitter passivation by atomic layer deposition of Al₂O₃, 22.5% efficient cells (three busbars) have been realized on commercial 156 · 156 mm² Czochralski‐Si. This result has been independently confirmed by ISE CalLab. Copyright © 2016 John Wiley & Sons, Ltd.     

Effectiveness of antioxidants in preventing oxidation of palm oil enriched with heme iron: A model for iron fortification in baked products

Bakery products such as biscuits, cookies, and pastries represent a good medium for iron fortification in food products, since they are consumed by a large proportion of the population at risk of developing iron deficiency anemia, mainly children. The drawback, however, is that iron fortification can promote oxidation. To assess the extent of this, palm oil added with heme iron and different antioxidants was used as a model for evaluating the oxidative stability of some bakery products, such as baked goods containing chocolate. The palm oil samples were heated at 220°C for 10 min to mimic the conditions found during a typical baking processing. The selected antioxidants were a free radical scavenger (tocopherol extract (TE), 0 and 500 mg/kg), an oxygen scavenger (ascorbyl palmitate (AP), 0 and 500 mg/kg), and a chelating agent (citric acid (CA), 0 and 300 mg/kg). These antioxidants were combined using a factorial design and were compared to a control sample, which was not supplemented with antioxidants. Primary (peroxide value and lipid hydroperoxide content) and secondary oxidation parameters (p‐anisidine value, p‐AnV) were monitored over a period of 200 days in storage at room temperature. The combination of AP and CA was the most effective treatment in delaying the onset of oxidation. TE was not effective in preventing oxidation. The p‐AnV did not increase during the storage period, indicating that this oxidation marker was not suitable for monitoring oxidation in this model.     

Mosquito-Plasmodium interactions in response to immune activation of the vector

A molecular model was built for human lecithin:cholesterol acyltransferase (LCAT) based upon the structural homology between this enzyme and lipases (Peelman et al. 1998. Prot. Sci. 7: 585-597). We proposed that LCAT belongs to the alpha/beta hydrolase fold family, and that the central domain of LCAT consists of a mixed seven-stranded beta-pleated sheet with four alpha-helices and loops linking the beta-strands. The catalytic triad of LCAT was identified as Asp345 and His377, as well as Ser181. This model is used here for the interpretation of the structural defects linked to the point mutations identified in LCAT, which cause either familial LCAT deficiency (FLD) or fish-eye disease (FED). We show that these mutations occur in separate domains of the 3D structure of the enzyme. Most mutations causing familial LCAT deficiency are either clustered in the vicinity of the catalytic triad or affect conserved structural elements in LCAT. Most mutations causing fish-eye disease are localized on the outer hydrophilic surface of the amphipathic helical segments. These mutations affect only minimally the overall structure of the enzyme, but are likely to impair the interaction of the enzyme with its co-factor and/or substrate.     

Regulation of K+ channel mRNA expression by stimulation of adenosine A2a-receptors in cultured rat microglia

Previous investigations suggest that the expression of K+ channels in cultured rat microglia is related to the activation status of these cells. Both, lipopolysaccharide (LPS) and agents that raise intracellular cyclic AMP have been shown to inhibit microglial proliferation. LPS also regulates the mRNA expression levels of K+ channels in cultured microglia, which led us to investigate possible regulatory interactions between K+ channels and adenosine A2a-receptors, which are coupled to the cAMP-signal transduction pathway. The selective adenosine A2a-receptor agonist CGS 21680 induced enhanced mRNA expression of both Kv1.3 and ROMK1, as well as an elevation of Kv1.3 protein. The selective adenosine A2a-receptor antagonist aminophenol (ZM 241385) and the nonselective antagonist 8-phenyltheophylline (8-PT) inhibited these effects. Elevations of cyclic AMP by use of dibutyryl cyclic AMP (dbcAMP), phosphodiesterase-inhibitor (RO 20-1724), forskolin, or cholera toxin (CTX), strongly enhanced Kv1.3-mRNA expression, but decreased ROMK1-mRNA levels. Results from experiments with actinomycin D suggest that K+ channel mRNA levels in cultured microglia were regulated by altered mRNA synthesis. Evidently, the CGS 21680-induced effects upon Kv1.3 were mediated via an increase in intracellular cyclic AMP, whereas ROMK1-mRNA expression appeared to be regulated by coupling of adenosine A2a-receptors to an alternative pathway, which involves activation of protein kinase C (PKC). It is concluded that the cyclic AMP second messenger system in microglia is not only involved in regulation of K+ channel activity, but also in regulation of de novo K+ channel synthesis.     

Selective isolation of reversible cold sensitive variants from Chinese hamster ovary cell cultures

The fine structure and cellular associations of the large pigment cells (LPC's) of the compound eye of the house fly were studied with high voltage and conventional electron microscopy. Depending on the sector of the compound eye, the facets are either rectangular or hexagonal. The underside of each facet has indentations exactly aligned with those on top into which inserts an angulated sleeve of LPC's. Under the rectangular lens facet 6 or 8 small compact (in cross section) LPC's join four elongate LPC's. Clusters of compact cells alternate in this ring with elongate ones. Compact cells compress together and become quadrangular (in cross section) several microns below their insertion into the lens and form "building block" corners while elongate cells form "side rails" for the rectangular type of distal pseudocone enclosure. Beneath hexagonal facets all LPC's are rather elongate with out corner cells. In both facet types LPC's enclose the pseudocone for a longitudinal distance of 4 mum and then are displaced as bordering cells by a sleeve of two corneal pigment cells (CPC's), each of which encloses half of the proximal pseudocone. For the following 6 mum of longitudinal distance these concentric sleeves of CPC's and LPC's form a double layer around the pseudocone. At about 10 mum below lens base the two sleeves separate; LPC's become attenuated and extend cable-like to the basement membrane and CPC's enclose the proximal pseudocone, Semper cells and distal retinula. The junction between lens and LPC's has critical structural value in that (1) this is the sole anchorage to the lens by the lengthy remainder of the ommatidium, and (2) LPC's enclose the semiliquid pseudocone in the most distal portion of the pseudocone. In addition to vertical support, the LPC's send out numerous lateral processes that make structural contact among themselves, with the corneal pigment cells and the photoreceptor cells. The structural features of this array are discussed relative to possible physiological roles.     

Rheological behavior of molten epoxide prepolymers

Flow properties of four molten epoxide prepolymers of number average molecular weight 900(I), 1,500(II), 2,100(III) and 4,000(IV), were measured at temperatures ranging from 361 to 463K, and shear rates from 500 to 10,000 s^?1. Apparent shear viscosities showed that all prepolymers used have Newtonian behavior up to shear rates of 2,000 s^?1. Shear thinning occurs at higher shear rates. Flow activation energies at constant shear rates in the range of 500 to 7,000 s^?1 vary for prepolymer III from 5 to 24 kcal/mol, and for prepolymer IV from 9 to 25 kcal/mol. Flow indices in the same shear rate range vary for prepolymer III from 1.0 to 0.7 and for prepolymer IV from 1.0 to 0.3.