Zidovudine pharmacokinetics in premature infants exposed to human immunodeficiency virus

We used population analysis techniques to determine zidovudine (ZDV) pharmacokinetic parameters in 15 preterm neonates (mean gestational age, 29.4 weeks; mean birth weight, 1,230 g) at a mean age of 5.5 days. The values of the pharmacokinetic parameters were as follows: clearance, 2.53 +/- 0.44 ml/min/kg; volume of distribution, 1.59 +/- 0.51 liters/kg; and half-life, 7.2 +/- 1.5 h. For seven infants studied a second time, at a mean age of 17.7 days, an increase in the mean clearance (2.33 versus 4.35 ml/min/kg; P = 0.024) and a decrease in the half-life (7.3 versus 4.4 h; P = 0.003) were found. The ZDV clearance is low and the half-life is prolonged in premature neonates, but the clearance increases and the half-life decreases with postnatal age. Potentially toxic concentrations may accumulate in serum if the standard dosage for full-term infants is used. We suggest that initial ZDV dosing should be reduced to 1.5 mg every 12 h for preterm neonates.     

Removal of E. coli and helminth eggs in UASB: Polishing pond systems in Brazil.

Ponds following anaerobic reactors, such as Upflow Anaerobic Sludge Blanket (UASB) reactors, have been termed polishing ponds in the literature. The present paper analyses the removal of E. coli and helminth eggs in five UASB-polishing pond systems in Brazil. Since there were ponds in series, the total number of ponds was 10. The ponds had average retention times varying from 2 to 21 days, and depths ranging from 0.40 to 2.00 m. The shallow ponds in series, even with low retention times, were able to produce effluents complying with the coliform WHO guidelines for unrestricted irrigation (< or = 1000 MPN/100 ml). An equation for the coliform decay coefficient was proposed: Kb (dispersed flow) = 0.710H(-0955) (20 degrees C). The equation highlights the inverse relationship between the pond depth and the decay coefficient. All polishing pond systems were able to produce effluents with helminth eggs concentrations predominantly equal to zero, and satisfying the WHO guidelines for unrestricted and restricted irrigation (< or = 1 egg/L, arithmetic mean). The approximate range of helminth eggs removal efficiency was predicted satisfactorily.     

Dissection of the carotid artery and vertebral artery--diagnosis and therapy

Carotid and vertebral artery dissections typically occur in young adults after major trauma, although they can arise spontaneously or after trivial injury. Many patients with carotid dissections have minor symptoms such as a subject bruit or Horner's syndrome. Cephalic pain is also frequent and often inaugural in carotid dissection. However, extracranial dissection is a well recognised cause of ischaemic stroke. The diagnosis of dissection was based on angiographic findings. Noninvasive imaging also allows prompt and reliable diagnosis. Our goal was to demonstrate the spectrum of neuroradiologic (CT, MR and angiographic) findings in craniocervical arterial dissection and compare the diagnostic utility of CT, MR, MR angiography. Clinical data imaging studies, and outcome were reviewed and compared with the results in four patients with carotid artery dissection.     

Evolutionary biology and human paternal behavior: Comment on Silverstein (1993).

L. B. Silverstein (see record 1994-17264-001) makes excellent use of recent data on nonhuman primate behavior to argue for the complexity of interaction between biological and environmental variables in the ontogeny of male parental behavior. She has read the current discourse in primate evolutionary studies with a careful and sophisticated eye for the evidence emerging from primate field studies over the last decade of great plasticity in primate behavior. Yet, as a biosocial anthropologist, fundamental questions remain for S. Sperling about how useful such data about parenting behavior in monkeys and apes are to discussions of the complex cultural, historical, and socioeconomic variables that underlie variations in human male parenting. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Thermal decomposition behavior of poly[3,3-bis(ethoxymethyl) oxetane] and related polyethers

The thermal decomposition behavior of poly[3,3-bis(ethoxymethyl)oxetane] (polyBEMO) was examined and compared to the decomposition of poly(ethylene oxide) (PEO) and poly(tetramethylene oxide) (polyTHF). Differential scanning calorimetric (DSC) studies as a function of heating rates and at constant temperature as a function of time yielded activation energies of 45–50 kcal/mol, characteristic of polyether decomposition. First-order decomposition kinetics were found. The reaction is endothermic, with a heat of decomposition of 18.6 kcal/mol. Effusion mass spectroscopy on polyBEMO showed major peaks at 112, 140, 168, and 174 amu. A mechanism is proposed in which the thermal scission of the ether bonds in both the polymer chain and in the appendanges initiates the decomposition. The main decomposition reaction for polyBEMO can be written as where the appendages and main chain are cleaved in an unknown order.     

Semi-1 thermoplastic interpenetrating polymer networks of physically crosslinked poly(n-butyl acrylate) and polystyrene

Poly(n-butyl acrylate) (PnBA) chemically crosslinked with tetraethylene glycol dimethacrylate (TEGDM) and physically crosslinked PnBAs produced by neutralization of poly(n-butyl acrylate-stat-acrylic acid) with NaOH or Ca(OH)₂ were prepared as a polymer I network. Each polymer I was swollen with styrene and cured in situ into semi-IPN-TEGDM, semi-IPN-Na, or semi-IPN-Ca, respectively. Both physically crosslinked polymers maintained their shapes during the swelling procedure. Dynamic mechanical spectroscopy indicated that good mixing of the two polymers took place in the semi-IPN-Ca as well as in semi-IPN-TEGDM, but a distinct phase separation occurred in the semi-IPN-Na. These results were supported by their transparent or optical opaque appearances, respectively. Annealing at 180°C developed further phase separation in the semi-IPN-Na, but very little in the semi-IPN-Ca. Analyses by the incompatibility number (based on the modulus–temperature curve) and the calculation of individual phase compositions (from the glass transition temperature shifts) were used in estimating the extent of molecular mixing.     

Synthesis of transparent fluorocarbon elastomers: Effect of crosslinker type and electron beam irradiation level on physical and mechanical behavior

Saturated fluorocarbon elastomers are very resistant to chemical reactions, including those of a crosslinking nature. In order to study proper methods of preparing these materials, Viton GLT was mixed with various levels of trimethylol propane trimethacrylate, TMPTM, and triallyl isocyanurate, Diak #7. After molding, the materials were subjected to electron beam irradiation. The glass transition, rubbery modulus, viscoelastic behavior, and equilibrium swelling were used to characterize the materials as a function of crosslinker and irradiation level. In general, the modulus and gel fraction increased with both crosslinker content and irradiation level. Mixtures of both crosslinking monomers produced an unexpected synergism, yielding higher tensile strength, and earlier onset of gelation.     

Structure-property relationships in rubber-toughened epoxies

Epoxies toughened with two reactive liquid rubbers, an epoxy-terminated butadiene acrylonitrile rubber (ETBN) and an amino-terminated butadiene acrylonitrile rubber (ATBN), were prepared and studied in terms of their structure property relationships. A two-phase structure was formed, consisting of spherical rubber particles dispersed in an epoxy matrix. A broad distribution of rubber particles was observed in all the materials with most of the particles ranging in size from 1 to 4 μm, but some particles exceeding 20 μm were also found. Impact strength, plane strain fracture toughness (K_IC), and fracture energy (G_IC) were increased, while Young's modulus and yield strength decreased slightly with increasing rubber content and volume fraction of the dispersed phase. Both G_IC and K_IC were found to increase with increasing apparent molecular weight between crosslinks and decreasing yield strength. The increased size of the plastic zone at the crack tip associated with decreasing yield strength could be the cause of the increased toughness. An ATBN-toughened system containing the greatest amount of epoxy sub-inclusion in the rubbery phase demonstrated the best fracture toughness in this series. In the present systems, rubber-enhanced shear deformation of the matrix is considered to be the major toughening mechanism. Curing conditions and the miscibility between the liquid rubber and the epoxy resin determine the phase morphology of the resulting two-phase systems. Kerner's equation successfully describes the modulus dependence on volume fraction for the two-phase epoxy materials.     

Characterization of electron beam crosslinked poly(styrene-block-ethylene-co-butylene-block-styrene)

A saturated triblock copolymer, poly(styrene-block-ethylene-co-butylene-block-styrene) was chemically crosslinked using trimethylol propane trimethacrylate, TMPTM, and subjected to electron beam radiation. The gel percent, Gehman ten second modulus, and stress relaxation were measured to characterize the materials as a function of crosslinker concentration and radiation level. A time-temperature super-position master curve was generated at 63°C for 3 percent TMPTM and 5 Mrads of radiation, which indicated rubbery plateau behavior at long times of measurement, as opposed to the uncrosslinked material, which continued to creep and flow. The main locus of crosslinking was within the polystyrene phase, which explains reduced creep and stress relaxation only for long times of measurement and/or high temperatures. Based on shifts of the glass transition temperatures, it was estimated that 11 to 16 percent poly(ethylene-co-butylene) was dissolved in the polystyrene phase.     

Miscible blends of styrene-acrylic acid copolymers with aliphatic,crystalline polyamides

Styrene-acrylic acid copolymers exhibit miscibility with various aliphatic, crystalline polyamides (e.g., nylon 6, 11, and 12) at 20% acrylic acid content in the copolymer. At 8% acrylic acid, phase separation is observed with the crystalline polyamides. At 14% acrylic acid, partial miscibility is observed with each polyamide, resulting in the T_g's of the constituents shifted toward the other constituent. The miscibility of the styrene-acrylic acid copolymers ( > 14 wt % AA) can be ascribed to hydrogen bonding interactions with the polyamides. Styrene-acrylic acid (20% AA) copolymers are miscible with other nylons with alternating amide orientation along the chain (e.g., nylon 6,6 and nylon 6,9). These samples tend to crosslink upon exposure to temperatures above the polyamide melting point unlike the nylon 6, 11, and 12 blends in which branching may only occur. Nylon 11/styrene-acrylic acid blends were chosen for crystallization rate studies. A melting point depression of nylon 11 occurs with addition of the styrene-acrylic acid (20% AA). The Flory-Huggins interaction parameter from the melting point depression is calculated to be -0.27. The crystallization rate of nylon 11 is significantly reduced with the addition of the miscible SAA copolymers (20% AA). The spherulitic growth rate equation predicts this behavior based on a T_g increase with SAA addition.