Notes on the Epidemiology of Multiple Sclerosis,with Special Reference to Dietary Habits

A hypothesis, based primarily on the occurrence of multiple sclerosis (MS) in the Faroe Islands and supported by numerous analytical epidemiological studies, is described. It proposes that MS is caused by the interaction of a virus disease with intestinal pathology, e.g., infectious mononucleosis, and application of smoked and nitrate/nitrite-cured meat products in the diet during circumscribed time intervals. The biological mechanisms might involve a break of tolerance by an alteration of self within the central nervous system, by nitrophenylated compounds conjugated to animal tissue, in particular to proteins occurring in the central nervous system. Further research is needed.     

Sludge Bulking Control with Ozone

O zonation was studied as a non-specific means of sludge bulking control. Direct ozonation at 6 g/m³ influent, i.e. 4 gO₃/kg sludge per day into the aeration basin of a 150 l/d Phoredox system controlled the growth of filamentous organisms and improved the settleability of the sludge. Bulking control with ozone is not significantly more expensive than with chlorine or with larger settler capacity.     

Streambed Sediment as a Barrier to Groundwater Pollution: Insights from Fieldwork and Modelling in the River Thames Basin

Integrated fieldwork and modelling has been undertaken to assess the vulnerability of riverside wells to pollution when river water is contaminated. Results highlight the importance of streambed sediments as a barrier to groundwater pollution by river water. The bed of the River Thames is lined with brown and grey organic-rich silts of low hydraulic conductivity (about 0.002 m/d). A 3-D model for solute transport in stream-aquifer systems was developed and applied to two riverside sites in the middle Thames valley. Model results indicate that well-water quality would only breach EC limits if the river was heavily polluted for a week or even a month (clearly an unlikely scenario). Sensitivity analyses showed the models to be far more sensitive to streambed parameters than to aquifer parameters. Thus it would be more sensible to focus fieldwork on the measurement of streambed properties than on the more usually measured aquifer parameters.     

Environmental Implications of Treatment of Coastal Sewage Discharges

The environmental implications of implementing the requirement for treatment of coastal sewage prior to discharge, which were put forward in an EC draft Directive on municipal waste-water treatment, are examined. In order to establish the current situation, the results of a national survey of coastal and estuarine sewage discharges are presented. A review of the impact of sewage discharges on the marine environment is presented in conjunction with an assessment of the impact of sewage-treatment processes on the land and in the air. These aspects are integrated into overall conclusions about net environmental impact. Finally, a decision-tree approach to the assignment of priority to additional action required at individual locations is developed.     

Pilot Scale Aerobic Sequencing Batch Reactor for Pig Waste Treatment

A n existing aetated lagoon treating piggery waste was converted into an aerobic sequencing batch reactor (SBR). After the commissioning period, the SBR plant treated piggery wastewater containing BOD and suspended solids (SS) concentrations of 2881 mg/l and 1419 mg/1 respectively, producing an effluent having an average BOD and SS of 18.7 mg/1 and 12.3 mg/1 respectively. The volumetric loadings on the SBR and the process were similar. However, the SBR process operated at a lower mixed liquor suspended solids (MLSS) concentration and shorter sludge retention period. Although the capital and operating costs of the SBR are higher than for the aerated lagoon, the simplicity of operation, the high BOD and SS removal efficiency, and the small land requirement make this type of process an attractive treatment option, particularly in places where land supply is limited and expensive.     

Enhanced calcium–magnesium–aluminosilicate (CMAS) resistance of GdAlO3 (GAP) for composite thermal barrier coatings

The impact of calcium–magnesium–alumino-silicate (CMAS) degradation is a critical factor for development of new thermal and environmental barrier coatings. Several methods of preventing damage have been explored in the literature, with formation of an infiltration inhibiting reaction layer generally given the most attention. Gd₂Zr₂O₇ (GZO) exemplifies this reaction with the rapid precipitation of apatite when in contact with CMAS. The present study compares the CMAS behavior of GZO to an alternative thermal barrier coating (TBC) material, GdAlO₃ (GAP), which possesses high temperature phase stability through its melting point as well as a significantly higher toughness compared with GZO. The UCSB laboratory CMAS (35CaO–10MgO–7Al₂O₃–48SiO₂) was utilized to explore equilibrium behavior with 50:50 mol% TBC:CMAS ratios at 1200, 1300, and 1400°C for various times. In addition, 8 and 35 mg/cm² CMAS surface exposures were performed at 1425°C on dense pellets of each material to evaluate the infiltration and reaction in a more dynamic test. In the equilibrium tests, it was found that GAP appears to dissolve slower than GZO while producing an equivalent or higher amount of pore blocking apatite. In addition, GAP induces the intrinsic crystallization of the CMAS into a gehlenite phase, due in part to the participation of the Al₂O₃ from GAP. In surface exposures, GAP experienced a substantially thinner reaction zone compared with GZO after 10 h (87 ± 10 vs. 138 ± 4 μm) and a lack of strong sensitivity to CMAS loading when tested at 35 mg/cm² after 10 h (85 ± 13 versus 246 ± 10 μm). The smaller reaction zone, loading agnostic behavior, and intrinsic crystallization of the glass suggest this material warrants further evaluation as a potential CMAS barrier and inclusion into composite TBCs.     

Infrared Emission Spectrophotometric Study of the Changes Produced by TiN Coating of Metal Surfaces in an Operating EHD Contact

Infrared emission spectra and related measurements were obtained from an operating ball/plate EHD sliding contact under a variety of operating conditions. In order to be able to compare the effect of the ball surface, some of the steel balls were coated with a thin layer of titanium nitride (TiN) by vapor deposition. Polyphenyl ether (5P4E) was used as the lubricant and 1 percent of 1,1,2-trichloroethane (TCE) as an additive with a high affinity for steel but a low affinity for TiN. TiN is chemically inert, but its thermal conductivity is lower than that of steel. Therefore, the overall temperatures with TiN-coated balls were higher. Nevertheless, no scuffing was observed with the coated balls under conditions giving rise to scuffing with the uncoated balls. Tractions were lower with the TiN-coated balls and with the steel balls when TCE was added to the 5P4E. These findings were found to be inversely related to the degree of polarization of the spectral emission bands. The intensity and the dichroism of these bands were related to shear rates and inlet conditions of the EHD contact.