Effect of modified atmosphere packaging on the shelf-life of coated, whole and sliced mushrooms

Whole and sliced fresh mushrooms (Agaricus bisporus) were packaged with PVC wrap or two polyolefins (PD-941 and PD-961) films after coating with CaCl₂ and chitosan. Package gas composition, color, weight loss and maturity were measured during storage at 12 °C and 80%RH. For PD-961, the highest in-package concentration occurred during the first day of storage regardless of treatments, while wrap and PD-941 showed varying degrees in-package concentration with different processes and coatings. The whiteness of whole mushrooms varied significantly with the type of coating, but not with the type of films. The extent of darkening was greater in coated whole mushrooms than in sliced ones. Weight loss occurred in all packages and varied from 3 (g/100 g) to about 7 (g/100 g) after 6 days of storage. Due to a lower permeability, PD-961 packages had the lowest weight loss. The type of packaging films significantly affected the maturity index, where PD-961 most effectively lowered maturity index for both whole and sliced mushrooms, thus extending the shelf-life. The type of coating did not appear to affect maturity index except for the wrap package where chitosan coating markedly lowered the maturity index of sliced mushrooms.     

Study of specific absorption rate (SAR) induced in two child head models and in adult heads using mobile phones

This paper gives a first comparison of specific absorption rate (SAR) induced in a child-sized (CS) head and an adult head using a dual-band mobile phone. In the second study, the visible human head is considered and comparison of SAR induced in a CS or child-like (CL) head and an adult head using a dual-band mobile phone is given. All the peaks of average SAR over a mass of 10 and 1 g in the head and the power budget are determined in the two comparisons using the finite-difference time-domain method. The differences between the results for adult and CS or CL heads are given at 900 and 1800 MHz. No important differences are noted for the peak SAR averaged over 10 g (SAR10 g), between the two adult head models, as well as between the two child head models. The peak SAR10 g in the brain of the CS or CL head is slightly more significant than that for the adult one.     

Pathogenesis of Mycobacterium bovis infection in cattle

This paper reviews the pathogenesis of Mycobacterium bovis infection in cattle, focusing on aspects relating to the host rather than the organism. A broad concept of pathogenesis has been considered and information is presented on sources and routes of infection, as well as the immune responses and pathology. In addition, data is presented on the excretion of M. bovis from tuberculous cattle.     

Synthesis and characterisation of a submicrometre silicon carbide powder

A beta-silicon carbide powder with a surface area of 30m²g^?l and a mean particle size of < 1μm was produced from the thermal conversion of silicon resin in an atmosphere of hydrogen. The amount of product increased with increasing iron content (0–2.1 wt%) and firing temperature (1200–1500°C). Chemical analysis, X-ray diffraction and i.r. absorption spectrometry were used to follow the conversion reaction.     

Dark Current and Signal-to-Noise Ratio in BDJ Image Sensors

In this paper, analytical expressions of dark currents and equivalent noise generators of a CMOS color image sensor are presented, and the signal-to-noise ratio (SNR) at both outputs is evaluated. Static measurements and simulations on Austria Micro Systems 0.35-mum CMOS test structures yield guidelines to increase the SNR of the buried double junction photodetector     

Effects of thermal oxidation conditions of silicon electrodes on cathodic electrochemiluminescence of Ru(bpy)3 chelate

Hot electrons emitted from thin oxide film-coated heavily doped silicon electrodes by cathodic pulse polarization can induce electrochemiluminescence from luminophores. The intensity of electrochemiluminescence produced at the electrode surface is dependent on the features of thin oxide films formed by thermal oxidation. As a preliminary study, we investigated the effect of thermal oxide growth conditions on the intensity of electrochemiluminescence produced at these electrodes, such as oxidation atmospheres, oxidation temperature, oxidation time and pre-treatment of wafers, using ruthenium(II) tris-(2,2′-bipyridine) chelate as a model luminophore. Optimal oxidation conditions of heavily doped silicon electrodes were obtained for the generation of intense electrochemiluminescence at this kind of silicon electrodes.     

Processing of Sapota (Sapodilla): Drying

ABSTRACT: The drying characteristics of sapota ( Achras zapota, cv , Kalipatti), a tropical fruit crop, were studied. Fruits were cut in sizes of half, quarter, and 5 mm slices and dried at temperatures of 55, 60, 65, and 70 °C in convection air and vacuum ovens. Moisture content of the fruit reduced from 72 to 78% (w.b) to 8.5 to 12.5% (w.b.) with drying times of 15 to 35 h in a convection air oven and of 14 to 31 h in a vacuum oven. Log and modified log models were fitted for the drying data. Empirical models were developed to predict drying constants as a function of drying temperature and sizes of samples with good correlation. Keywords: sapota, sapodilla, drying     

Synthesis and Physical Studies of the Organic Salts of Pindolol: Pindolol Benzoate and Pindolol 2-Methoxyphenylacetate

In order to investigate the formation of organic salts of drugs, two salts of pindolol were prepared using salt-forming agents which were crystalline and suitable for physical studies in the solid state. The stoichiometry of the products, pindolol benzoate and pindolol 2-methoxyphenylacetate, was established by elemental analysis. The precipitates formed were assessed by differential scanning calorimetry (DSC), thermogravimetry (TG), x-ray powder diffractometry (XRPD) and Fourier transform-infrared spectrometry (FT-IR). According to the TG and DSC curves, there was no water of crystallization in the precipitates, and the products were thermally stable. Both precipitates gave one sharp melting endotherm which differed from the endotherms of the starting compounds. The x-ray dipaction pattern of the precipitates direred clearly from those of the starting materials, acid and base. The products showed absorption by FT-IR typical of carboxylic acid salts at about 1640-1540 cm^-1. The carbonyl absorption indicative of the carboxylic acid group of benzoic acid or 2-methonyphenylacetic acid was not detectable in the spectra of the precipitates. All this indicates that two new crystalline organic salts (1:1) were formed during the syntheses.     

Correlations in a General Theory of Quantum Measurement

The paper investigates correlations in a general theory of quantum measurement based on the notion of instrument. The analysis is performed in the algebraic formalism of quantum theory in which the observables of a physical system are described by a von Neumann algebra, and the states—by normal positive normalized functionals on this algebra. The results extend and generalise those obtained for the classical case where one deals with the full algebra of operators on a Hilbert space.     

Synthesis and characterization of a new 5-thiol-protected deoxyuridine phosphoramidite for site-specific modification of DNA

A new nucleotide analogue was developed for site-specific incorporation of a reactive thiol group into DNA. This creates a unique site for the post-synthetic modification of that nucleotide with a variety of molecular tags, such as photo-cross-linkers and fluorescent or spin-label moieties. 5'-O-(4,4'-Dimethoxytrityl)-5-[S-(2,4-dinitrophenyl)thio]-2'-deoxyuridin e 3'-O-(2-cyanoethyl N,N'-diisopropylphosphoramidite) was synthesized and incorporated at internal positions in several oligonucleotides using automated DNA synthesis and standard phosphoramidite chemistry. The coupling yield of the analogue was comparable to the coupling yield for a standard phosphoramidite, and no significant differences were observed in the overall yields of the dinitrophenyl-labeled oligonucleotides compared to the corresponding unmodified oligonucleotides. Characterization of the dinitrophenyl-modified oligonucleotides included enzymatic degradation, HPLC chromatography, and gel electrophoresis. Deprotection of the mercaptan group with beta-mercaptoethanol yielded an oligonucleotide containing 5-mercaptodeoxyuridine which was then selectively modified, without purification, by reaction with 5-(iodoacetamido)fluorescein. Incorporation of the dinitrophenyl-modified oligonucleotide into double-stranded DNA was achieved using the polymerase chain reaction. CHaracterization of the dinitrophenyl-labeled product by immunodetection with anti-dinitrophenyl antibodies confirmed the stability of the protecting group to the thermocycling and thus established the use of this thiol-protected mercaptodeoxyuridine phosphoramidite for preparation of site-specifically modified DNA.