A bidding decision index for construction contractors

Results from applying the model on a sample of contractors, the majority of whom were international and operating in Egypt, reinforces the credibility of the developed methodology, claim the authors.     

Optimal detection of visual evoked potentials

The authors consider the problem of detecting visual evoked potentials (VEP's). A matched subspace filter is applied to the detection of the VEP and is demonstrated to perform better than a number of other evoked potential detectors. Unlike single-harmonic detectors, the matched subspace filter (MSF) detector is suitable for detecting multiharmonic VEP's. Moreover, the MSF is optimal in the uniformly most powerful sense for multiharmonic signals with unknown noise variance     

A Y-channel design for improving zeta potential and surface conductivity measurements using the current monitoring method

This study presents a new Y-channel design for measuring the zeta potential and surface conductance of a solid-liquid pairing using the current monitoring technique. The new design improves the throughput and reliability of the testing apparatus since the displacement between two solutions can be repeated many times without interfering with the experiments. It also increases the accuracy of the measurement by producing sharper start and end transitions for the current–time plot of the solution displacement process. In this design, efforts have been made to minimize the effects of electrolysis, Joule heating and undesired pressure driven flow on the measurements. An improvement on the current–time slope analysis is also presented. The Y-channel design was validated by comparing zeta potential measurements to published results. The zeta potential of several biological buffers relevant to the microfluidic community in plasma treated PDMS/PDMS and PDMS/Glass microchannels are presented. Preliminary studies of surface conductivity measurements using the Y-channel design were also conducted and are briefly discussed.     

Optimized Identification with Severity Factors of Gastric Cancer for Internet of Medical Things

The Internet of Medical Things (IoMT) emerges with the vision of the Wireless Body Sensor Network (WBSN) to improve the health monitoring systems and has an enormous impact on the healthcare system for recognizing the levels of risk/severity factors (premature diagnosis, treatment, and supervision of chronic disease i.e., cancer) via wearable/electronic health sensor i.e., wireless endoscopic capsule. However, AI-assisted endoscopy plays a very significant role in the detection of gastric cancer. Convolutional Neural Network (CNN) has been widely used to diagnose gastric cancer based on various feature extraction models, consequently, limiting the identification and categorization performance in terms of cancerous stages and grades associated with each type of gastric cancer. This paper proposed an optimized AI-based approach to diagnose and assess the risk factor of gastric cancer based on its type, stage, and grade in the endoscopic images for smart healthcare applications. The proposed method is categorized into five phases such as image pre-processing, Four-Dimensional (4D) image conversion, image segmentation, K-Nearest Neighbour (K-NN) classification, and multi-grading and staging of image intensities. Moreover, the performance of the proposed method has experimented on two different datasets consisting of color and black and white endoscopic images. The simulation results verified that the proposed approach is capable of perceiving gastric cancer with 88.09% sensitivity, 95.77% specificity, and 96.55% overall accuracy respectively.     

Behavior of Composite Unreinforced Masonry–Fiber-Reinforced Polymer Wall Assemblages Under In-Plane Loading

An experimental investigation was conducted to study the in-plane behavior of face shell mortar bedded unreinforced masonry (URM) wall assemblages retrofitted with fiber-reinforced polymer (FRP) laminates. Forty-two URM assemblages were tested under different stress conditions present in masonry shear and infill walls. Tests included prisms loaded in compression with different bed joint orientation (on/off-axis compression), diagonal tension specimens, and specimens loaded under joint shear. The behavior of each specimen type is discussed with emphasis on modes of failure, strength and deformation characteristics. Results showed that the application of FRP laminates on URM has a great influence on strength, postpeak behavior, as well as altering failure modes and maintaining the specimen integrity. The retrofitted specimens reached compressive strength of 1.62–5.64 times that of their unretrofitted counterparts, depending on the bed joint orientation, and joint shear strength increased by eightfold.     

Orthogonal planar laser polarization spectroscopy

Planar laser polarization spectroscopy has recently been used to image the hydroxyl radical in combustion for small intersection angles of pump and probe beams. We report an experimental configuration that allows planar laser polarization imaging for perpendicular intersection of pump and probe beams. We demonstrate what to our knowledge is the first planar laser polarization spectroscopy imaging at a 90 degree intersection of pump and probe beams for both linearly and circularly polarized pump beams.     

Simultaneous measurement of the surface temperature and the release of atomic sodium from a burning black liquor droplet

Simultaneous measurement of the concentration of released atomic sodium, swelling, surface and internal temperature of a burning black liquor droplet under a fuel lean and rich condition has been demonstrated. Two-dimensional two-colour optical pyrometry was employed to determine the distribution of surface temperature and swelling of a burning black liquor droplet while planar laser-induced fluorescence (PLIF) was used to assess the temporal release of atomic sodium. The key findings of these studies are: (i) the concentration of atomic sodium released during the drying and devolatilisation stages was found to be correlated with the external surface area; and (ii) the insignificant presence of atomic sodium during the char consumption stage shows that sodium release is suppressed by the lower temperature and by the high CO₂ content in and around the particle.     

Theoretical investigation into instability of a refrigeration system with an evaporator controlled by a thermostatic expansion valve

A theoretical model is developed and solved to investigate the instability of a refrigeration system with an evaporator controlled by a thermostatic expansion valve. An evaporator time constant is used to account for the delay of the liquid refrigerant distribution along the two phase region. Results show that there is an evaporator critical time constant, below which the system operates in a stable manner. This critical time constant is found to decrease with decreasing the partial load and to increase with increasing the contact thermal resistance and the two-phase region heat transfer coefficient. The bulb size is also found to have a great effect on the stability.     

Spatial Precipitation Assessment with Elevation by Using Point Cumulative Semivariogram Technique

Depiction of precipitation change by elevation in an areaindicates the possibilities of orographic rainfall occurrencesin the mountainous regions. In general, precipitation increaseswith elevation but sometimes inverse cases occur locally due toorographic and meteorological features of the area. Inpractice, prior to any quantitative modeling, qualitativeassessments and interpretations help to have sound foundationsin search for a suitable model. In this article, standardizedpoint cumulative semivariogram (SPCSV) methodology is employedfor identification of the precipitation-elevationrelationship. According to relative positions of theprecipitation and elevation SPCSVs four different precipitationcategories are suggested. The application of the methodologyproposed is presented for the precipitation records from YuccaMountain, Nevada, U.S.A.     

Co-channel interference in cellular radio systems using frequency hopping code division multiple access (FH-CDMA)

The expected interference power in a digital cellular radio system using frequency hopping code division multiple access is investigated. The up-link only is considered. Using both analytical and numerical methods, a probability density function for this power is derived. This function is used to predict the hop erasure probability of a system, as a function of the tolerable signal to interference ratio and of the system load.Mr. Al-Etaibi is sponsored by Saudi Telecom