Progressive NO2 Sensors with Rapid Alarm and Persistent Memory-Type Responses for Wide-Range Sensing Using Antimony Triselenide Nanoflakes

Antimony triselenide (Sb₂Se₃) nanoflake-based nitrogen dioxide (NO₂) sensors exhibit a progressive bifunctional gas-sensing performance, with a rapid alarm for hazardous highly concentrated gases, and an advanced memory-type function for low-concentration (<1 ppm) monitoring repeated under potentially fatal exposure. Rectangular and cuboid shaped Sb₂Se₃ nanoflakes, comprising van der Waals planes with large surface areas and covalent bond planes with small areas, can rapidly detect a wide range of NO₂ gas concentrations from 0.1 to 100 ppm. These Sb₂Se₃ nanoflakes are found to be suitable for physisorption-based gas sensing owing to their anisotropic quasi-2D crystal structure with extremely enlarged van der Waals planes, where they are humidity-insensitive and consequently exhibit an extremely stable baseline current. The Sb₂Se₃ nanoflake sensor exhibits a room-temperature/low-voltage operation, which is noticeable owing to its low energy consumption and rapid response even under a NO₂ gas flow of only 1 ppm. As a result, the Sb₂Se₃ nanoflake sensor is suitable for the development of a rapid alarm system. Furthermore, the persistent gas-sensing conductivity of the sensor with a slow decaying current can enable the development of a progressive memory-type sensor that retains the previous signal under irregular gas injection at low concentrations.     

Dynamic Stabilization of DNA Assembly by Using Pyrrole-Imidazole Polyamide

We used N-methylpyrrole (Py)-N-methylimidazole-(Im) polyamide as an exogenous agent to modulate the formation of DNA assemblies at specific double-stranded sequences. The concept was demonstrated on the hybridization chain reaction that forms linear DNA. Through a series of melting curve analyses, we demonstrated that the binding of Py−Im polyamide positively influenced both the HCR initiation and elongation steps. In particular, Py−Im polyamide was found to drastically stabilize the DNA duplex such that its thermal stability approached that of an equivalent hairpin structure. Also, the polyamide served as an anchor between hairpin pairs in the HCR assembly, thus improving the originally weak interstrand stability. We hope that these proof-of-concept results can inspire future use of Py−Im polyamide as a molecular tool to modulate the formation of DNA assemblies.     

Evaluating the effects of frame of reference on spatial collaboration using desktop collaborative virtual environments

Spatial collaboration is an everyday activity in which people work together to solve a spatial problem. For example, a group of people will often arrange furniture together or exchange directions with one another. Collaborative virtual environments using desktop PCs are particularly useful for spatial activities when the participants are distributed. This work investigates ways to enhance distributed, collaborative spatial activities. This paper explores how different frames of reference affect spatial collaboration. Specifically, it reports on an experiment that examines different combinations of exocentric and egocentric frames of reference with two users. Tasks involve manipulating an object, where one participant knows the objective (director) and the other performs the interactions (actor). It discusses the advantages and disadvantages of the different combinations for a spatial collaboration task. Findings from this study demonstrate that frames of reference affect collaboration in a variety of ways and simple exocentric-egocentric combinations do not always provide the most usable solution.     

移动WiMAX的发展现状

基于IEEE 802.16-2004及ETSI HiperMAN空中接口标准的WiMAX,正在被证明是一个高性价比的替代有线和DSL服务的固定无线技术.150多次的WiMAX试验及在五大洲的部署,清楚地证明了世界范围内对WiMAX作为固定无线服务技术的接受程度.     

Flexible, dry-released process for aluminum electrostatic actuators

We present an all-aluminum MEMS process (Al-MEMS) for the fabrication of large-gap electrostatic actuators with process steps that are compatible with the future use of underlying, pre-fabricated CMOS control circuitry. The process is purely additive above the substrate as opposed to processes that depend on etching pits into the silicon, and thereby permits a high degree of design freedom. Multilayer aluminum metallization is used with organic sacrificial layers to build up the actuator structures. Oxygen-based dry etching is used to remove the sacrificial layers. While this approach has been previously used by other investigators to fabricate optical modulators and displays, the specific process presented herein has been optimized for driving mechanical actuators with relatively large travels. The process is also intended to provide flexibility for design and future enhancements. For example, the gap height between the actuator and the underlying electrode(s) can be set using an adjustable polyimide sacrificial layer and aluminum “post” deposition step. Several Al-MEMS electrostatic structures designed for use as mechanical actuators are presented as well as some measured actuation characteristics     

Slow eroding biodegradable multiblock poloxamer copolymers

Biodegradable multiblock poloxamers (BMPs) with gel duration of 8 h to several weeks were prepared by varying their molecular weights from 4000 to 40 000 g mol^?1. The molecular weight of the BMP was controlled by changing the poloxamer to coupling agent ratio. Assuming a micelle packing model of the BMP gel, as in the case of a poloxamer gel, the micelle properties and critical gel concentration of BMPs were investigated on the basis of the scaling concept. The findings suggest that the control of molecular weight by hydrolyzable groups can be a facile approach to optimize the gel properties for biomedical applications. Copyright © 2005 Society of Chemical Industry     

Phase transition of LCP fluids confined in nanochannels through MD simulation

Manipulation of molecular orientation alignment in MCTLCPs (main-chain thermotropic liquid crystalline polymers) by pure shear at nano scale has been investigated for the first time using molecular dynamics (MD) simulation. Results indicate that high planar shear induces long-range uniform orientation ordering (liquid crystalline phase) of initially randomly orientated molecules of MCTLCP fluid confined in a nanochannel, which is confirmed by analyzing the orientation order parameter and the snapshots of MCTLCP liquid in a nanochannel under different shear rates. Insights into the origin of the phase transition phenomena are given at molecular level through investigating the thermodynamic density distribution of MCTLCP molecules in the nanochannel, suggesting that the energy shift due to a radical jump of system density affects both the magnitude and the orientation of the molecular ordering. Simulation results also show that there is a critical shear rate for transforming isotropic phase into liquid crystalline phase. The critical shear rate is dependent on the temperature of the MCTLCP system. Findings in this paper may present useful information for processing TLCP molecules at nano scale and the understanding of nanoflow.     

A 3D unsplit-advection volume tracking algorithm with planarity-preserving interface reconstruction

A new volume tracking method is introduced for tracking interfaces in three-dimensional (3D) geometries partitioned with orthogonal hexahedra. The method approximates interface geometries as piecewise planar, and advects volumes in a single unsplit step using fully multidimensional fluxes that have their definition based in backward-trajectory remapping. By using multidimensional unsplit advection, the expense of high-order interface reconstruction is incurred only once per timestep. Simple departures from strict backward-trajectory remapping remove any need for consideration of volume computations involving shapes consisting of non-planar ruled surfaces. Second-order accuracy of the method is demonstrated even for vigorous 3D deformations.     

Transfer formalisms

We discuss some different ideas about the sort of formalism appropriate for translation (more specifically, transfer) that have been explored within Eurotra. The intention is not to evaluate these different ideas, but to outline the issues of general interest and relevance that they raise. Section 1 describes some common assumptions, section 2 describes the different ways they have been interpreted, and section 3 considers some further implications.