Developing an Interactive Spatial Multi-Attribute Decision Support System for Assessing Water Resources Allocation Scenarios

Water Resources Management - In water resource management, assessing water resource allocation scenarios (WRASs) is an important multi-attribute decision making (MADM) problem. It involves...     

Effects of stray magnetic forces on position error signals during a long seeking-and-settling process

This paper is to study how stray magnetic forces encountered in a long seeking process affect position errors of a hard disk drive after it finishes the seek and settles. The study consists of three parts: analysis of stray magnetic forces, numerical modeling, and analysis of numerical results. In the analysis of stray magnetic forces, we lump the stray magnetic forces into three components D1, D2 and D4. Specifically, D1 is a pair of stray magnetic forces in the plane of the voice coil. The two forces act on the two equal legs of the voice coil. In addition, the two forces point to and away from the pivot center, respectively. D2 is a pair of stray magnetic forces out of the plane of the voice coil. The two forces are equal in magnitudes but opposite in directions. The two force components also act on the two equal legs of the voice coil. D4 is identical to D2, except that the two force components in D4 act in the same direction. In the numerical study, we adopt a numerical model that includes a spinning spindle motor, a spinning disk pack with multiple disks, a stationary base plate with a top cover, and a slewing head-stack assembly. Moreover, multiple bearings are present in the model to connect the multiple components. In particular, fluid-dynamic bearings connect the rotating spindle and disk pack with the base plate, pivot bearings connect the base plate with the head-stack assembly, and air bearings connect the spinning disk pack with head sliders located at the tip of the slewing head-stack assembly. Also, the numerical model assumes that the head-stack assembly seeks according to a user-specified seeking profile. Numerical simulations show two major conclusions. First, stray magnetic force component D1 does not lead to significant position errors when the head-stack assembly settles. Stray magnetic force components D2 and D4, however, can affect the position errors by significantly exciting torsion and bending modes of the head-stack assembly. Second, a flex cable can significantly increase position errors below 1 kHz during settling.     

Theoretical calculation simulation studies of ABV nuclear reactor coupled with desalination system

In this paper, research has been conducted on the floating type nuclear power plant named as ABV reactor which is designed for district heating, power, and sea water desalination by OKBM facility at Russia. This reactor was tested under different thermal loads during the designing phase, and three modules have been investigated. Theoretical calculations and simulation studies have been performed on these three modules having specifications as ABV‐6M with 47MW_th, ABV‐6 with 38MW_th, and ABV‐3 with 18MW_th.The results obtained from these modules have been calculated mathematically and verified by simulation. We have compared the originally derived data of ABV desalination system with our theoretical and simulation analysis. The results from two desalination techniques including RO and RO + MED have been calculated and are presented in this paper with details. The results obtained from both analysis show that the efficiency of ABV nuclear reactor desalination system increases with the decrease in corresponding water cost ratio. Copyright © 2015 John Wiley & Sons, Ltd.     

Theoretical investigation of plasma dynamical behavior and halo current analysis

In this paper, a novel system has been developed for plasma disruption conditions followed by downward vertical displacement. During the disruption, size and orientation of plasma decreases, which gives the halo current circulated around each contacting point in radial as well as in poloidal directions. Therefore, a new mathematical model has been developed, which gives the interaction forces of halo current, vertical, and radial plasma dynamical behavior (linear and nonlinear). This theoretical approach showed that the tokamak plasma has two connecting points in order to distinguish between the stable and unstable position. This model can particularly give the magnetic field change points and changing of flux, which are more convenient in order to discuss the static and tilting position of plasma behavior. Numerical techniques have been calculated in terms of plasma dynamical behavior, that is, Electromagnetic/plasma, Vertical Displacement Event (VDE) stages, and initial interaction between the forces under specific time interval. The objective of the research is to developed theoretical and computational model in order to investigate the dynamical behavior of plasma under disruption conditions. This is the novel method, and no work has been reported so far. Copyright © 2015 John Wiley & Sons, Ltd.     

Biogenic Amine Contents in Non-alcoholic Beers: Screening and Optimization of Derivatization

A rapid, sensitive, and reproducible high-performance liquid chromatographic procedure for the determination of nine biogenic amines in non-alcoholic beers was developed by an optimized benzoylation procedure. A Plackett–Burman factorial design was used in order to screen the statistically significant variables. The significant factors of biogenic amine benzoylation, reagent volume and pH, were optimized by a complete factorial response surface design, and optimal reaction conditions were generated. The optimized method showed good linearity (correlation coefficients > 0.997) and good recoveries (from 88.6 to 104.7 %). The repeatability and reproducibility of method were >3.9 and >4.6 %, respectively. Moreover, the detection limits of biogenic amines were calculated between 0.05 and 0.15 μg/ml in wine samples. The optimized method has been applied to the determination of biogenic amine contents of non-alcoholic beers consumed in Iran. Their values ranged from 0 to 2.56 mg/l, no significant differences (p?>?0.05) were observed between the analyzed samples, and none of these samples surpass the toxic levels reported in the literature.     

Optima localization by vehicle formations imitating the Nelder-Mead simplex algorithm

In this paper, we address the problem of localizing extrema points and iso-contours of ambient environmental fields (specifically, ocean bottom landscape and underwater plumes) using a networked formation of autonomous underwater vehicles. We propose the use of the Nelder-Mead extension to the basic simplex nonlinear optimization algorithm. In these robust gradient-free strategies, decisions are solely made based on field values measured by the individual vehicles, while measurements are fused and actions decided according to the algorithm. A main goal of this paper is to trigger interest in direct search methods as pertains to this type of robotic problem.     

THERMODYNAMICS OF MOISTURE SORPTION IN ALFALFA PELLETS

ABSTRACT

Experimental data on sorption isotherms of alfalfa pellets were used to determine the thermodynamic functions (differential heat of sorption, spreading pressure, net integral enthalpy and entropy) of the pellets. The thermodynamic functions were then utilized in modeling the specific heats of pellets as a function of moisture content. The estimated values of the thermodynamic functions at different moisture contents confirmed the results of an earlier study on the influence of moisture sorption on the physical integrity of the pellets. The changes in the thermodynamic properties and physical integrity were prominent when the moisture of the pellets were between 0.10 and 0.12 (mass fraction basis). Using the differential heat of sorption, it was determined that alfalfa pellets have higher affinity for moisture uptake when compared to wheat and lentils. The specific heat of the solids of alfalfa pellets had a parabolic relationship with moisture whereas the specific heat of water fraction increased linearly with moisture content of the pellets.