Gamma ray-irradiated induced effects on SCN ligand-based MMTC single crystals for optoelectronic applications synthesized by SR method

Journal of Materials Science: Materials in Electronics - Nonlinear optical organometallic single crystal of manganese mercury thiocyanate (MMTC) has been grown by SR method in aqueous solution. The...     

Microstructure,hardness, toughness and abrasive wear resistance of 16.0 wt. % chromium white iron after continuous and cyclic destabilisation treatment

Destabilisation of as-cast chromium white iron with 16 wt-% chromium are performed by continuous destabilisation treatment for 4 h and short duration (0.66 h) cyclic destabilisation treatment at 900, 950, 1000, 1050, and 1100 °C. Continuous destabilisation causes secondary carbides precipitation from austenite which on slow cooling transforms to pearlite matrix. Cyclic destabilisation treatment causes similar precipitation of finer secondary carbides following shorter period austenitisation and a matrix containing martensite and retained austenite on forced-air cooling. After continuous destabilisation, hardness falls below the as-cast value (HV622); whereas it rises to HV950 after cyclic destabilisation treatment. The as-cast notched impact toughness (4.0 J) increases to 8.5 J or more after both continuous and cyclic destabilisation at 1050 and 1100 °C. Abrasive wear resistance after continuous destabilisation improves only at higher wear load (49.0 N), while after cyclic destabilisation it supersedes the as-cast and Ni-Hard IV performance at both low (19.6 N) and high (49.9 N) wear load.     

Performance analysis of tool electrode prepared through laser sintering process during electrical discharge machining of titanium

The International Journal of Advanced Manufacturing Technology - It is of great significance for intelligent manufacturing to study condition monitoring and diagnosis methods to realize early...     

Electrospinning as a tool in fabricating hydrated porous cobalt phosphate fibrous network as high rate OER electrocatalysts in alkaline and neutral media

Electrospinning (ES) is a most reliable method for synthesizing one dimensional (1D) fibrous material. Fibrous materials are having peculiar interest owing to their fascinating properties. For efficient hydrogen fuel generation, electrocatalytic water splitting is one of the finest way of producing hydrogen in a pure form. But it is encountered by the counter oxygen evolution reaction (OER) in more often. As of now, noble metal based catalysts are utilized in the commercial sector. Some of the disadvantages associated with the noble materials are restrict their usage commercially. To address this issue, herein, we have synthesized One dimensional (1D), hydrated porous cobalt phosphate fibrous network by an ES method and act as an electrocatalyst for OER in both alkaline and neutral media for the first time, which exhibits an overpotential of 245 and 457 mV respectively at a current density of 10 mAcm^?2 with astonishing stability.     

Modeling and surface texturing on surface roughness in machining LaPO4–Y2O3 composite

In this work, lanthanum phosphate with a 20% yttria (LaPO₄/Y₂O₃) composite prepared by an Aqueous Sol–Gel process is machined using an Abrasive Water Jet Machine (AWJM). The machinability of this composite is studied by varying the input parameters namely Jet Pressure (JP), Stand-Off Distance (SOD), and Traverse Speed (TS) on Surface finish. Garnet of 80 mesh size is used as an abrasive with a flow rate of 85?g/min. The microstructural characterization study reveals the presence of new element YPO₄. This element enhances the machinability and reduced porosity in the composite. Microscopy examinations on the machined surface reveals that partial overlapping at low JP, poor surface finish at high JP and SOD, forged deficiency at maximum SOD and TS. The minimum levels of all input parameters are influenced to obtain acceptable Ra. Atomic Force Microscopy (AFM) on the kerf surface shows micro wear track and peaks. The Multiple Regression Analysis (MRA) is developed for Ra to check the adequacy. From the Analysis of Variance (ANOVA), SOD has a significant effect on Ra with a contribution of 53%. The influence of JP and TS on Ra is found to be 31% and 15%, respectively.     

Conformation Analysis of GalNAc‐Appended Sugar Amino Acid Foldamers as Glycopeptide Mimics

Sugar amino acid (SAA)‐based foldamers with well‐defined secondary structures were appended with N‐acetylgalactosamine (GalNAc) sugars to access sequence‐defined, multidentate glycoconjugates with full control over number, spacing and position. Conformation analysis of these glycopeptides by extensive NMR spectroscopic studies revealed that the appended GalNAc units had a profound influence on the native conformational behaviour of the SAA foldamers. Whereas the 2,5‐cis glycoconjugate showed a helical structure in water, comprising of two consecutive 16‐membered hydrogen bonds, its 2,5‐trans congener displayed an unprecedented 16/10‐mixed turn structure not seen before in any glycopeptide foldamer.     

Intelligent Water Management: a Triangular Type-2 Intuitionistic Fuzzy Matrix Games Approach

Matrix games with fuzzy payoffs have spread itself nowadays in diverse fields. Fuzzy game theory with triangular type-1 fuzzy numbers are visited more by researchers. In this paper, we consider matrix games with payoffs as triangular type-2 intuitionistic fuzzy numbers, i.e., Triangular Type-2 Intuitionistic Fuzzy Matrix Game (TT2IFMG) as a new and rare concept. A new ranking function is used to get relevant solutions of TT2IFMG. We are living in times of unprecedented scientific-technical advancement, yet facing several critical global problems that threaten human welfare and our ecosystem. Water management, a burning problem of the Earth now-a-days, is treated here under the scanner of TT2IFMG environment where we discuss some policy-management toward the free and fair accession of water against its limited resources.     

Liquid yield from juniper and mesquite bio‐fuel gasification

Mesquite (Prosopis glandulosa) and redberry juniper (Juniperus pinchotii) are two woody species which dominate uncultivated lands in the south central Great Plains, USA (Texas, Oklahoma) and may have potential for bioenergy utilization. In this study, these two biomasses were gasified in an adiabatic, updraft fixed‐bed gasifier using air as medium. The products include low heating value gas and liquid tar yield. The effects of fuel moisture content and the equivalence ratio (ER) on liquid yields including heavy tar and light tar and higher heating value (HHV) of the producer gas were investigated. It was found that updraft gasifiers produce a large amount of tar, in a range of 100 g/Nm³ of gas produced. As the equivalence ratio (ER) increased (i.e. more rich char conditions), peak temperature (T_peak) within the bed decreased due to the lesser partial oxidization. The liquid yield showed peak value with change in moisture content between 6 and 24%. Heavy tar is a very high quality fuel with a higher heating value of over 29 MJ/kg on a dry, ash‐free (DAF) basis which is a slightly higher than that of ethanol. Copyright © 2015 John Wiley & Sons, Ltd.